Talk:Emtec S830

Do you have a working Windows installation ?

If it is the case you could perform a USB Snopping

The sequence is :

• Download and launch USBSnoop 1.8 : http://benoit.papillault.free.fr/usbsnoop/index.php.en
• Connect the USB tuner
• Check which driver correspond to the USB tuner ( "Present" = "Yes" column )
• Unplug the USB tuner
• Disconnect the aerial.
• Click on "Install" in USBSnoop for the driver corresponding to DVB tuner
• Replug the USB tuner
• Launch the TV app.
• Select 2 or 3 different channels ( there is no picture as there is no antenna ) with both tuners.
• Unplug the USB tuner
• Zip the logfile
• Post it. I'll compare it with the Pinnacle' snooping.

--Treza 12:23, 7 December 2007 (CET)

Where do i have to post it ? Also .. the led on the stick doesn't go on when i have the filter installed, yet dvbdream is able to tune and decode channels .. so i think the led isn't very important. BTW when in windows i don't insert the driver cd but let is use windows update.. it get installed as a HP DVB-T Tuner. maybe that helps --Waldo 15:30, 13 December 2007 (CET)