Pinnacle PCTV Dual Hybrid Pro PCI Express (3010i)
| This article is a stub or is incomplete. |
| This article requires expansion. Please help add informative information if you can. |
A hybrid DVB-T PCIe card from Pinnacle.
It is currently not supported under Linux.
Overview/Features
- PCi-express card - 2 independant Hybrid (DVB-T, analog TV, analog Radio) decoders (2x Antenna connector in) - 1 S-video IN - 1 Internal Audio In connector - 1 Internal Audio Out connector - 1 Internal Vidéo In connector - IR Remote control (Receiptor plugs in card by mini-jack connector)
Components Used
Main component :
Chip Philips SAA7162E/G SB4740.1 SB4740.1 Q521HRZ ZSG05391X
+ 2 little chips Philips TDA1004GA SA5727.1 05 ZSG 05141
Identification
Here is the result of the lspci -v command on my PC :
02:00.0 Multimedia controller: Philips Semiconductors Unknown device 7162
Subsystem: Pinnacle Systems Inc. Unknown device 0100
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fdb00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable-
Capabilities: [50] Express Endpoint IRQ 0
Capabilities: [74] Power Management version 2
Capabilities: [80] Vendor Specific Information
NB: with lspci -vn I have no informations about the card ?
Other Images
front
front 2
front 3
rear
front-connectors
front 4
front 5
rear 2
- ...
Making it Work
Firmware
?
Drivers
The directlink driver file is here - WinXP 32bits The homepage of all pinnacle drivers is here
Sample kernel output
provide the relevant portion of dmesg here
Currently, the result of the dmesg command :
Remote Control Support
discuss support for the remote control here