Talk:Compro VideoMate E700
Jump to navigation
Jump to search
dmesg
Sorry for having to provide it all, I've looked over it a few times and can't see anything blatantly obvious.
[ 0.000000] Linux version 2.6.22-14-generic (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 21:45:15 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786416) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F6D30 checksum 0 [ 0.000000] ACPI: RSDP 000F6D30, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT BFFF3000, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: FACP BFFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: DSDT BFFF30C0, 4C3F (r1 NVIDIA AWRDACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS BFFF0000, 0040 [ 0.000000] ACPI: MCFG BFFF7D80, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] ACPI: APIC BFFF7D00, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000bfff0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786416) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-00000000bfff0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 786416 [ 0.000000] On node 0 totalpages: 786319 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1126 pages reserved [ 0.000000] DMA zone: 2817 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10695 pages used for memmap [ 0.000000] DMA32 zone: 771625 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 774442 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 74.016940] time.c: Detected 2010.317 MHz processor. [ 74.018169] Console: colour VGA+ 80x25 [ 74.018187] Checking aperture... [ 74.018191] CPU 0: aperture @ cd10000000 size 32 MB [ 74.018193] Aperture too small (32 MB) [ 74.023273] No AGP bridge found [ 74.060303] Memory: 3089820k/3145664k available (2274k kernel code, 55456k reserved, 1181k data, 296k init) [ 74.060356] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 74.138855] Calibrating delay using timer specific routine.. 4023.08 BogoMIPS (lpj=8046163) [ 74.138890] Security Framework v1.0.0 initialized [ 74.138899] SELinux: Disabled at boot. [ 74.139235] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 74.142498] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 74.144384] Mount-cache hash table entries: 256 [ 74.144536] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 74.144538] CPU: L2 Cache: 512K (64 bytes/line) [ 74.144541] CPU 0/0 -> Node 0 [ 74.144543] CPU: Physical Processor ID: 0 [ 74.144545] CPU: Processor Core ID: 0 [ 74.144563] SMP alternatives: switching to UP code [ 74.144887] Early unpacking initramfs... done [ 74.453248] ACPI: Core revision 20070126 [ 74.453308] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 74.496971] Using local APIC timer interrupts. [ 74.546681] result 12564480 [ 74.546683] Detected 12.564 MHz APIC timer. [ 74.550646] SMP alternatives: switching to SMP code [ 74.550815] Booting processor 1/2 APIC 0x1 [ 74.560534] Initializing CPU#1 [ 74.638173] Calibrating delay using timer specific routine.. 4020.87 BogoMIPS (lpj=8041755) [ 74.638180] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 74.638182] CPU: L2 Cache: 512K (64 bytes/line) [ 74.638185] CPU 1/1 -> Node 0 [ 74.638187] CPU: Physical Processor ID: 0 [ 74.638188] CPU: Processor Core ID: 1 [ 74.638274] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 74.642524] Brought up 2 CPUs [ 76.112995] migration_cost=328 [ 76.113552] NET: Registered protocol family 16 [ 76.113642] ACPI: bus type pci registered [ 76.113648] PCI: Using configuration type 1 [ 76.114689] ACPI: EC: Look up EC in DSDT [ 76.120118] ACPI: Interpreter enabled [ 76.120121] ACPI: (supports S0 S1 S4 S5) [ 76.120137] ACPI: Using IOAPIC for interrupt routing [ 76.127962] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 76.127969] PCI: Probing PCI hardware (bus 00) [ 76.128380] PCI: Transparent bridge - 0000:00:09.0 [ 76.128703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 76.128945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 76.177903] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 76.178047] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 76.178190] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 76.178330] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 76.178471] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 76.178613] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 76.178753] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 76.178896] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 76.179042] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 76.179182] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 76.179324] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 76.179466] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 76.179607] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 76.179755] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 76.179903] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 76.180050] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 76.180211] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 76.180365] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 76.180520] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 76.180674] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 76.180775] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 76.180935] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 76.181093] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 76.181251] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 76.181414] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 76.181572] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 76.181730] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 76.181888] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 76.182045] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 76.182209] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 76.182372] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 76.182540] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 76.182635] Linux Plug and Play Support v0.97 (c) Adam Belay [ 76.182650] pnp: PnP ACPI init [ 76.182661] ACPI: bus type pnp registered [ 76.186353] pnp: PnP ACPI: found 12 devices [ 76.186356] ACPI: ACPI bus type pnp unregistered [ 76.186416] PCI: Using ACPI for IRQ routing [ 76.186420] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 76.186499] NET: Registered protocol family 8 [ 76.186501] NET: Registered protocol family 20 [ 76.186617] pnp: 00:01: ioport range 0x1000-0x107f has been reserved [ 76.186620] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved [ 76.186623] pnp: 00:01: ioport range 0x1400-0x147f has been reserved [ 76.186626] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved [ 76.186634] pnp: 00:01: ioport range 0x1800-0x187f has been reserved [ 76.186637] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved [ 76.186647] pnp: 00:0a: iomem range 0xd0000000-0xdfffffff could not be reserved [ 76.186652] pnp: 00:0b: iomem range 0xd1800-0xd3fff has been reserved [ 76.186655] pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved [ 76.186658] pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 76.186660] pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 76.186945] PCI: Bridge: 0000:00:09.0 [ 76.186947] IO window: disabled. [ 76.186951] MEM window: f3000000-f30fffff [ 76.186953] PREFETCH window: disabled. [ 76.186955] PCI: Bridge: 0000:00:0b.0 [ 76.186957] IO window: 9000-9fff [ 76.186960] MEM window: disabled. [ 76.186961] PREFETCH window: disabled. [ 76.186964] PCI: Bridge: 0000:00:0c.0 [ 76.186965] IO window: disabled. [ 76.186968] MEM window: f3100000-f31fffff [ 76.186971] PREFETCH window: disabled. [ 76.186973] PCI: Bridge: 0000:00:0d.0 [ 76.186975] IO window: 8000-8fff [ 76.186977] MEM window: disabled. [ 76.186979] PREFETCH window: disabled. [ 76.186984] PCI: Bridge: 0000:00:0e.0 [ 76.186986] IO window: a000-afff [ 76.186989] MEM window: f0000000-f2ffffff [ 76.186991] PREFETCH window: e0000000-efffffff [ 76.186998] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 76.187006] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 76.187011] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 76.187017] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 76.187022] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 76.187075] NET: Registered protocol family 2 [ 76.189114] Time: acpi_pm clocksource has been installed. [ 76.221445] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 76.223153] TCP established hash table entries: 524288 (order: 11, 12582912 bytes) [ 76.234821] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 76.235745] TCP: Hash tables configured (established 524288 bind 65536) [ 76.235750] TCP reno registered [ 76.245451] checking if image is initramfs... it is [ 76.857498] Freeing initrd memory: 7706k freed [ 76.864378] audit: initializing netlink socket (disabled) [ 76.864395] audit(1206894059.804:1): initialized [ 76.866522] VFS: Disk quotas dquot_6.5.1 [ 76.866573] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 76.866657] io scheduler noop registered [ 76.866659] io scheduler anticipatory registered [ 76.866661] io scheduler deadline registered [ 76.866754] io scheduler cfq registered (default) [ 76.867582] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 [ 76.867593] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 76.867599] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 [ 76.867605] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 76.867611] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 [ 76.867617] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 76.867623] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 [ 76.867630] PCI: Found enabled HT MSI Mapping on 0000:00:00.0 [ 76.867638] Boot video device is 0000:05:00.0 [ 76.867803] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 76.867821] assign_interrupt_mode Found MSI capability [ 76.867824] Allocate Port Service[0000:00:0b.0:pcie00] [ 76.867896] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 76.867913] assign_interrupt_mode Found MSI capability [ 76.867916] Allocate Port Service[0000:00:0c.0:pcie00] [ 76.867972] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 76.867989] assign_interrupt_mode Found MSI capability [ 76.867991] Allocate Port Service[0000:00:0d.0:pcie00] [ 76.868044] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 76.868060] assign_interrupt_mode Found MSI capability [ 76.868062] Allocate Port Service[0000:00:0e.0:pcie00] [ 76.893116] Real Time Clock Driver v1.12ac [ 76.893222] Linux agpgart interface v0.102 (c) Dave Jones [ 76.893225] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 76.893317] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 76.893463] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 76.893943] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 76.894688] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 76.894830] input: Macintosh mouse button emulation as /class/input/input0 [ 76.894949] PNP: No PS/2 controller found. Probing ports directly. [ 77.148666] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 77.148814] mice: PS/2 mouse device common for all mice [ 77.148961] TCP cubic registered [ 77.149013] NET: Registered protocol family 1 [ 77.149238] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 77.149249] Freeing unused kernel memory: 296k freed [ 78.331134] AppArmor: AppArmor initialized<5>audit(1206894061.272:2): type=1505 info="AppArmor initialized" pid=1247 [ 78.337883] fuse init (API version 7.8) [ 78.342879] Failure registering capabilities with primary security module. [ 78.858021] usbcore: registered new interface driver usbfs [ 78.858060] usbcore: registered new interface driver hub [ 78.858097] usbcore: registered new device driver usb [ 78.859620] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 [ 78.859631] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23 [ 78.859957] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 78.859965] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 78.860176] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 78.860209] ehci_hcd 0000:00:02.1: debug port 1 [ 78.860213] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 78.860225] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfeb00000 [ 78.860231] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 78.860344] usb usb1: configuration #1 chosen from 1 choice [ 78.860372] hub 1-0:1.0: USB hub found [ 78.860380] hub 1-0:1.0: 10 ports detected [ 78.875055] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 78.875065] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 78.876547] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 78.888258] SCSI subsystem initialized [ 78.893567] libata version 2.21 loaded. [ 78.919894] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 78.967851] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 78.967866] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22 [ 78.968129] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 78.968138] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 78.968216] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 78.968237] ohci_hcd 0000:00:02.0: irq 22, io mem 0xf3201000 [ 79.029595] usb usb2: configuration #1 chosen from 1 choice [ 79.029746] hub 2-0:1.0: USB hub found [ 79.029755] hub 2-0:1.0: 10 ports detected [ 79.135575] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 [ 79.135597] NFORCE-CK804: chipset revision 242 [ 79.135600] NFORCE-CK804: not 100% native mode: will probe irqs later [ 79.135606] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller [ 79.135616] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 79.135625] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 79.135633] Probing IDE interface ide0... [ 79.454891] usb 2-9: new low speed USB device using ohci_hcd and address 2 [ 79.676467] usb 2-9: configuration #1 chosen from 1 choice [ 79.688905] usbcore: registered new interface driver hiddev [ 79.694739] input: Logitech USB Receiver as /class/input/input1 [ 79.694754] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-9 [ 79.704347] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: Fixing up Logitech keyboard report descriptor [ 79.704988] input: Logitech USB Receiver as /class/input/input2 [ 79.705317] input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-9 [ 79.705330] usbcore: registered new interface driver usbhid [ 79.705334] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 79.706715] Probing IDE interface ide1... [ 80.281045] sata_nv 0000:00:07.0: version 3.4 [ 80.281420] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 80.281430] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21 [ 80.281435] sata_nv 0000:00:07.0: Using ADMA mode [ 80.281755] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 80.281979] scsi0 : sata_nv [ 80.282034] scsi1 : sata_nv [ 80.282107] ata1: SATA max UDMA/133 cmd 0xffffc2000142a480 ctl 0xffffc2000142a4a0 bmdma 0x000000000001d000 irq 21 [ 80.282112] ata2: SATA max UDMA/133 cmd 0xffffc2000142a580 ctl 0xffffc2000142a5a0 bmdma 0x000000000001d008 irq 21 [ 80.749922] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 80.771496] ata1.00: Host Protected Area detected: [ 80.771498] current size: 976771055 sectors [ 80.771500] native size: 976773168 sectors [ 80.771716] ata1.00: native size increased to 976773168 sectors [ 80.771723] ata1.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133 [ 80.771726] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 80.790180] ata1.00: configured for UDMA/133 [ 81.261533] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 81.425486] ata2.00: ATAPI: ASUS DRW-2014L1T, 1.00, max UDMA/66 [ 81.597368] ata2.00: configured for UDMA/66 [ 81.597492] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 81.597501] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 81.597690] scsi 1:0:0:0: CD-ROM ASUS DRW-2014L1T 1.00 PQ: 0 ANSI: 5 [ 81.597703] ata2: bounce limit 0xFFFFFFFF, segment boundary 0xFFFF, hw segs 127 [ 81.598418] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 [ 81.598427] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20 [ 81.598432] sata_nv 0000:00:08.0: Using ADMA mode [ 81.598701] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 81.598824] scsi2 : sata_nv [ 81.599153] scsi3 : sata_nv [ 81.599371] ata3: SATA max UDMA/133 cmd 0xffffc2000142c480 ctl 0xffffc2000142c4a0 bmdma 0x000000000001e400 irq 20 [ 81.599377] ata4: SATA max UDMA/133 cmd 0xffffc2000142c580 ctl 0xffffc2000142c5a0 bmdma 0x000000000001e408 irq 20 [ 82.068930] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 82.077001] ata3.00: ATA-7: WDC WD2000JS-00MHB0, 02.01C03, max UDMA/133 [ 82.077004] ata3.00: 390721968 sectors, multi 16: LBA48 [ 82.084991] ata3.00: configured for UDMA/133 [ 82.396676] ata4: SATA link down (SStatus 0 SControl 300) [ 82.396406] scsi 2:0:0:0: Direct-Access ATA WDC WD2000JS-00M 02.0 PQ: 0 ANSI: 5 [ 82.396413] ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 [ 82.397543] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 82.397547] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23 [ 82.397554] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 82.397564] forcedeth: using HIGHDMA [ 82.408713] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 82.409402] sd 0:0:0:0: [sda] Write Protect is off [ 82.409406] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 82.409427] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 82.409501] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 82.409509] sd 0:0:0:0: [sda] Write Protect is off [ 82.409511] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 82.409522] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 82.409527] sda: sda1 sda2 [ 82.417817] sd 0:0:0:0: [sda] Attached SCSI disk [ 82.418040] sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) [ 82.418063] sd 2:0:0:0: [sdb] Write Protect is off [ 82.418066] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 82.418079] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 82.418126] sd 2:0:0:0: [sdb] 390721968 512-byte hardware sectors (200050 MB) [ 82.418133] sd 2:0:0:0: [sdb] Write Protect is off [ 82.418136] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 82.418147] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 82.418152] sdb:sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 82.422289] Uniform CD-ROM driver Revision: 3.20 [ 82.422460] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 82.432259] sdb1 [ 82.432644] sd 2:0:0:0: [sdb] Attached SCSI disk [ 82.436624] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 82.436658] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 82.436680] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 82.920777] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:0a.0 [ 83.660942] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 83.703063] ISO 9660 Extensions: RRIP_1991A [ 83.950517] Registering unionfs 1.4 [ 83.950522] unionfs: debugging is not enabled [ 83.958008] loop: module loaded [ 84.240490] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher [ 131.084106] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 131.153957] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 131.328861] ieee80211_crypt: registered algorithm 'NULL' [ 131.373347] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 131.373378] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 131.437371] input: PC Speaker as /class/input/input3 [ 131.571798] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 131.571804] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 131.695945] parport_pc 00:09: reported by Plug and Play ACPI [ 131.695991] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 131.786101] bcm43xx driver [ 131.786434] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 131.786443] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16 [ 131.857791] irda_init() [ 131.857816] NET: Registered protocol family 23 [ 132.328689] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 132.328698] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 22 [ 132.329001] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 132.650269] intel8x0_measure_ac97_clock: measured 54707 usecs [ 132.650273] intel8x0: clocking to 46892 [ 135.301817] No dock devices found. [ 135.334744] input: Power Button (FF) as /class/input/input4 [ 135.334767] ACPI: Power Button (FF) [PWRF] [ 135.334818] input: Power Button (CM) as /class/input/input5 [ 135.334831] ACPI: Power Button (CM) [PWRB] [ 135.985055] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) [ 135.985352] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 [ 135.985358] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 [ 139.168840] lp0: using parport0 (interrupt-driven). [ 139.771004] ppdev: user-space parallel port driver [ 141.838060] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 142.427999] Failure registering capabilities with primary security module. [ 143.073022] Bluetooth: Core ver 2.11 [ 143.073348] NET: Registered protocol family 31 [ 143.073351] Bluetooth: HCI device and connection manager initialized [ 143.073357] Bluetooth: HCI socket layer initialized [ 143.170922] Bluetooth: L2CAP ver 2.8 [ 143.170926] Bluetooth: L2CAP socket layer initialized [ 143.188364] Bluetooth: RFCOMM socket layer initialized [ 143.188563] Bluetooth: RFCOMM TTY layer initialized [ 143.188566] Bluetooth: RFCOMM ver 1.8 [ 144.905380] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 146.354673] NET: Registered protocol family 17 [ 149.563896] NET: Registered protocol family 10 [ 149.564148] lo: Disabled Privacy Extensions [ 155.025484] eth0: no IPv6 routers present [ 160.309968] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 172.711808] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 190.688188] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 203.090914] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 214.988046] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 228.012546] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 241.795514] usb 2-10: new full speed USB device using ohci_hcd and address 3 [ 241.917202] usb 2-10: configuration #1 chosen from 1 choice [ 241.961201] Bluetooth: HCI USB driver ver 2.9 [ 241.964423] usbcore: registered new interface driver hci_usb [ 303.962808] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 365.526206] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 427.089765] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed. [ 491.070208] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
`uname -a` gives:
Linux ubuntu 2.6.22-14-generic #1 SMP Sun Oct 14 21:45:15 GMT 2007 x86_64 GNU/Linux
By JesseLukeWalker 19:16, 30 March 2008 (CEST)