TechnoTrend TT-budget S-1500
Jump to navigation
Jump to search
A, so called, Budget or software decoding DVB-S PCI card from TechnoTrend.
Overview
Card is capable of delivering the full unmodified TS stream to userspace. Card can be equipped with a Common Interface for decryption CAMs card driver: budget-ci interface: PCI PCI device id: 1131:7146 PCI subsystem id: 13c2:1017 Bridge: Philips SAA7146A frontend possibility 1: tin box: ALPS BSBE1 frontend driver: stv0299 demodulator location: tin box demodulator: ? PLL: ? Notes: (BSBE1-502A/SAA7146AH/LNBP21PD)
Images
CAM tests
Using a CAM requires the optional CI extension provided by TechnoTrend.
Feel free to update this table with other types of CAMs.
| Type | HW version | Viaccess version | Application version | Results |
|---|---|---|---|---|
| Aston Pro ViAccess | ? | All | ? | Working |
| Aston Pro Irdeto | ? | ? | ? | Working, able to decrypt 12 channels simultaneously |
| Conax | 4.xx | N/A | ? | Working |
| Matrix Reloaded | ? | N/A | ? | Working |
| Cryptoworks | ? | N/A | ? | Working |
| Astoncrypt seca2 | 1.05 | N/A | Kaffeine 0.8.3 | Working |
| Official Canal Digitaal/TV Vlaanderen Mediaguard module | Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) | N/A | Kaffeine 0.8.3 | Working with corruption |
| Official Canal Digitaal/TV Vlaanderen Mediaguard module, TV Vlaanderen smartcard | Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) | N/A | MythTV 0.21 | Working perfectly, also with simultanious recordings |
| Matrix Reborn | ? | N/A | Kaffeine 0.8.3 | Working |
| Xcam (X-cam) | Angel chip | N/A | Kaffeine 0.8.3 | Working |
| Type | HW version | Application version | Results |
|---|---|---|---|
| Astoncrypt seca2 | 1.05 | Kaffeine 0.8.3 | Working |
| Xcam (X-cam) | Angel chip | Kaffeine 0.8.3 | Working |
| Matrix Reborn | ? | Kaffeine 0.8.3 | Working |
| Official Canal Digitaal/TV Vlaanderen Mediaguard module | Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) | Kaffeine 0.8.3 | Working with corruption |
| Conax | 4.xx | gnutv | Working |
| Irdeto Access - CI-module | CIM: 49.2.43 CIM SW: IRDETO ACCESS 1.11.003 SoftCell: Ver 2.21A - Demux (SW CA). Compiled Jan 17 2003 14:42:17 | gnutv | Not working. See below, will work with patch. |
CAMs confirmed working after applying any one of this patch (not tried both at the same time, but that seems unnessesary):
http://www.linuxtv.org/pipermail/linux-dvb/2007-July/019116.html
Notes: the corruption on the official CDS/TVV module is so bad you can't seriously watch a program with it, but it could be used to update/activate the smartcard.| Type | HW version | Application version | Results |
|---|---|---|---|
| Irdeto Access - CI-module | Produced by SCM. rev. 1.0 and 1.1 | gnutv | Cammenu works. Decoding ShowTime Arabia fails. Unknown if cam is supposed to work with ShowTime. |
| Irdeto Access - CI-module | Produced by SMIT. | gnutv, test-app (en50221 test app) | gnutv fails. CAM demands that display_control_callback is connected. |
| Conax | 4.xx | N/A | Working for 1.0W Canal Digital |
| Type | HW version | Application version | Results |
|---|---|---|---|
| PowerCAM.Pro | ? | Kaffeine 0.8.3 | Working |