Geniatech DVB-S Digistar
A DVB-S PCI card produced by Geniatech.
Reportedly works well under Linux although experience is that live playback is unwatchable on an AMD64 distro.
Overview/Features
Discuss the features and facets of the device here ... this means you
Components Used
Card is fitted with Conextant CX23882 Broadcast Decoder, CX24123 QPSK Demodulator, and a CX24109 Satellite Tuner module.
Uses the cx88 module.
Identification
Output from lspci -vnn
01:06.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder 14f1:8800] (rev 05) Subsystem: Conexant Unknown device [14f1:0084] Flags: bus master, medium devsel, latency 20, IRQ 18 Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 01:06.2 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05) Subsystem: Conexant Unknown device [14f1:0084] Flags: bus master, medium devsel, latency 64, IRQ 18 Memory at f9000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2
Output from lspci -vvn
01:06.0 0400: 14f1:8800 (rev 05) Subsystem: 14f1:0084 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 20 (5000ns min, 13750ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:06.2 0480: 14f1:8802 (rev 05) Subsystem: 14f1:0084 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1500ns min, 22000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Other Images
use the included code to insert other images if necessary ...
- Filename
description
- Filename
description
- ...
Making it Work
Firmware
is there any firmware specific information for this device? if so, list it here ... this means you
Drivers
provide the details of where the drivers and patches and necessary tools are available ... this means you
Sample kernel output
relevant dmesg output
[ 48.398015] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 48.398469] cx88[0]: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52,autodetected] [ 48.398432] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 48.398472] cx88[0]: TV tuner type 4, Radio tuner type -1 [ 48.424438] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 48.547719] cx88[0]/0: found at 0000:01:06.0, rev: 5, irq: 18, latency: 20, mmio: 0xfa000000 [ 48.547784] cx88[0]/0: registered device video0 [v4l2] [ 48.547819] cx88[0]/0: registered device vbi0 [ 48.576829] cx88[0]/2: cx2388x 8802 Driver Manager [ 48.576849] ACPI: PCI Interrupt 0000:01:06.2[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 [ 48.576856] PCI: Setting latency timer of device 0000:01:06.2 to 64 [ 48.576861] cx88[0]/2: found at 0000:01:06.2, rev: 5, irq: 18, latency: 64, mmio: 0xf9000000 [ 49.963588] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 49.963593] cx88/2: registering cx8802 driver, type: dvb access: shared [ 49.963597] cx88[0]/2: subsystem: 14f1:0084, board: Geniatech DVB-S [card=52] [ 49.963601] cx88[0]/2: cx2388x based DVB/ATSC card [ 49.994816] CX24123: detected CX24123 [ 49.994851] DVB: registering new adapter (cx88[0]) [ 49.994855] DVB: registering frontend 1 (Conexant CX24123/CX24109)...
Remote Control Support
discuss support for the remote control here
External Links
Manufacturers Site[1]