Talk:MSI DigiVox mini II
Jump to navigation
Jump to search
Image of the Board
Output of usbview
DVBT Manufacturer: Speed: 480Mb/s (high) USB Version: 2.00 Device Class: 00(>ifc ) Device Subclass: 00 Device Protocol: 00 Maximum Default Endpoint Size: 64 Number of Configurations: 1 Vendor Id: 10fd Product Id: 1513 Revision Number: 1.02 Config Number: 1 Number of Interfaces: 1 Attributes: c0 MaxPower Needed: 50mA Interface Number: 0 Name: Alternate Number: 0 Class: ff(vend.) Sub Class: 0 Protocol: 0 Number of Endpoints: 1 Endpoint Address: 81 Direction: in Attribute: 1 Type: Isoc Max Packet Size: 0 Interval: 125us
lsusb -vvv
Bus 001 Device 007: ID 10fd:1513 Anubis Electronics, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x10fd Anubis Electronics, Ltd idProduct 0x1513 bcdDevice 1.02 iManufacturer 1 iProduct 2 DVBT iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 50mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0000 1x 0 bytes bInterval 1
After supporting some users who asked me per email I added a description for installing driver and firmware to use the MSI DIGI VOX mini-II. Hope it's OK.
--Dischneider 13:03, 23 June 2007 (CEST)
I added a download for the firmware file, because the only source i found was an attachment in a mailing list archive. Works fine for me, if there's a problem with it please revert the article.
Daywalker 15:52, 7 September 2007 (CEST)