Archived:Em2880/Todo
Jump to navigation
Jump to search
Todo
I'll list the things are which are still outstanding before the current em2880 driver can be merged with the main v4l-dvb repository.
em2800 autodetection
please fill out the dmesg output for that modprobe command
Terratec Cinergy 200 USB
modprobe em28xx i2c_scan=1 card=6
relevant dmesg output:
em28xx #0: found i2c device @ 0x4a [saa7113h] em28xx #0: found i2c device @ 0x60 [remote IR sensor] em28xx #0: found i2c device @ 0x62 [???] em28xx #0: found i2c device @ 0x64 [???] em28xx #0: found i2c device @ 0x86 [tda9887] em28xx #0: found i2c device @ 0xc0 [tuner (analog)] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
Leadtek Winfast USB II
modprobe em28xx i2c_scan=1 card=7
Kworld USB2800
modprobe em28xx i2c_scan=1 card=8
V-Gear PocketTV
modprobe em28xx i2c_scan=1 card=37
Terratec Cinergy Hybrid XS France
- Secam Support
USB Logs are needed (tune to an analogue TV channel):
http://www.linuxtv.org/v4lwiki/index.php/USBVideo
+ root access to a box where that driver can be tested.
Contact mrechberger@gmail.com if you're able to help!
Hauppauge HVR 900 New Zealand
USB id = 2040:6500
modprobe em28xx i2c_scan=1
em28xx #0: found i2c device @ 0xa0 [eeprom] em28xx #0: found i2c device @ 0xb8 [tvp5150a] em28xx #0: found i2c device @ 0xc2 [tuner (analog)]
PAL-BG/PAL-I/PAL-M em2880
this requires some known changes in the xc3028 module