Compro VideoMate DVB-T220
Jump to navigation
Jump to search
Card features
- PCI interface
- Antenna (Composite), Remote and S-Video In
Chipsets
- PCI Bridge Card: NXP SAA7130HL
- COFDM Demodulator: Zarlink MT352
- Tuner: Quantek QT1010
Images
How to make it work
Not yet working :( It detects as a T200 but doesn't work.
Module parameters
dmesg
# dmseg [ 45.569669] saa7130/34: v4l2 driver version 0.2.14 loaded [ 45.569739] saa7130[0]: found at 0000:04:03.0, rev: 1, irq: 20, latency: 84, mmio: 0xfdcfe000 [ 45.569745] saa7130[0]: subsystem: 185b:c901, board: Compro Videomate DVB-T200 [card=71,autodetected] [ 45.569753] saa7130[0]: board init: gpio is 843f00 [ 45.569809] input: saa7134 IR (Compro Videomate DV as /devices/pci0000:00/0000:00:1e.0/0000:04:03.0/input/input7 [ 45.755429] saa7130[0]: i2c eeprom 00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 45.755437] saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 45.755443] saa7130[0]: i2c eeprom 20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff [ 45.755449] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.755454] saa7130[0]: i2c eeprom 40: ff d5 00 c4 86 1e ff ff ff ff ff ff ff ff ff ff [ 45.755460] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb [ 45.755466] saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.755471] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.755478] saa7130[0]: Unexpected tuner type info: d5 in eeprom [ 45.755532] saa7130[0]: registered device video0 [v4l2] [ 45.755550] saa7130[0]: registered device vbi0 [ 45.873425] saa7134 ALSA driver for DMA sound loaded [ 45.873448] saa7130[0]/alsa: saa7130[0] at 0xfdcfe000 irq 20 registered as card -2 [ 45.943354] saa7130[0]/dvb: frontend initialization failed
lspci
# lspci -vvvnn 04:03.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01) Subsystem: Compro Technology, Inc. Videomate DVB-T200 [185b:c901] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 84 (21000ns min, 8000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at fdcfe000 (32-bit, non-prefetchable) [size=1K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
i2cdetect
# i2cdetect -l i2c-0 smbus saa7130[0] SMBus adapter i2c-1 i2c NVIDIA i2c adapter I2C adapter i2c-2 i2c NVIDIA i2c adapter I2C adapter i2c-3 i2c NVIDIA i2c adapter I2C adapter
# i2cdetect 0
I will probe file /dev/i2c-0.
I will probe address range 0x03-0x77.
Continue? [Y/n] Y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- 0f
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: 50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- 62 63 -- -- -- -- 68 -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
# i2cdump 0 0x0f
I will probe file /dev/i2c-0, address 0xf, mode byte
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 0d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ?...............
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
50: 00 00 00 00 00 00 00 00 c2 00 00 80 00 00 00 00 ........?..?....
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 4d 00 13 .............M.?
80: 00 00 00 30 00 10 40 00 0a 20 08 0d 0f 00 40 00 ...0.?@.? ???.@.
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
b0: 00 00 00 00 00 00 00 00 10 40 20 00 46 34 47 1c ........?@ .F4G?
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
# i2cdump 0 0x50
I will probe file /dev/i2c-0, address 0x50, mode byte
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 5b 18 01 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [???T ?.CC??U???
10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff ..??. ..........
20: 01 40 01 03 03 ff 03 01 08 ff 00 88 ff ff ff ff ?@???.???..?....
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
40: ff d5 00 c4 86 1e ff ff ff ff ff ff ff ff ff ff .?.???..........
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb ...............?
60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0...............
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
# i2cdump 0 0x62
I will probe file /dev/i2c-0, address 0x62, mode byte
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 00 a0 00 19 00 00 00 2b 0b 10 08 41 e1 94 b6 2c .?.?...+???A???,
10: 10 f1 11 3f 1f 3f ff ff f7 80 d0 00 89 00 00 20 ??????..???.?..
20: e0 20 d0 d0 d0 40 08 29 55 39 13 01 ea 00 00 00 ? ???@?)U9???...
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
80: 00 a0 00 19 00 00 00 2b 0b 10 08 41 e1 94 b6 2c .?.?...+???A???,
90: 10 f1 11 3f 1f 3f ff ff f7 80 d0 00 89 00 00 20 ??????..???.?..
a0: e0 20 d0 d0 d0 40 08 29 55 39 13 01 ea 00 00 00 ? ???@?)U9???...
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
# i2cdump 0 0x63
I will probe file /dev/i2c-0, address 0x63, mode byte
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
10: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
30: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
40: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
50: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
60: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
70: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
80: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
90: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
a0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
b0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
c0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
d0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
e0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
f0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
# sudo i2cdump 0 0x68
I will probe file /dev/i2c-0, address 0x68, mode byte
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 27 53 15 03 03 01 00 00 00 40 3f 81 44 3f 01 00 'S????...@??D??.
10: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
30: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
40: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
50: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
60: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
70: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
80: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
90: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
a0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
b0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
c0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
d0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
e0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
f0: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XXXXXXXXXXXXXXXX
RegSpy
SAA7130 Card [0]: Vendor ID: 0x1131 Device ID: 0x7130 Subsystem ID: 0xc901185b 3 states dumped ---------------------------------------------------------------------------------- SAA7130 Card - State 0: (Immediately after startup) SAA7134_GPIO_GPMODE: 00804000 (00000000 10000000 01000000 00000000) SAA7134_GPIO_GPSTATUS: 00847f00 (00000000 10000100 01111111 00000000) SAA7134_ANALOG_IN_CTRL1: 88 (10001000) SAA7134_ANALOG_IO_SELECT: 02 (00000010) SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 00000000) SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 00000000) SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) SAA7134_I2S_OUTPUT_FORMAT: 00 (00000000) SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) SAA7134_I2S_AUDIO_OUTPUT: 00 (00000000) SAA7134_TS_PARALLEL: 04 * (00000100) SAA7134_TS_PARALLEL_SERIAL: 00 * (00000000) SAA7134_TS_SERIAL0: 00 * (00000000) SAA7134_TS_SERIAL1: 00 (00000000) SAA7134_TS_DMA0: 00 * (00000000) SAA7134_TS_DMA1: 00 * (00000000) SAA7134_TS_DMA2: 00 (00000000) SAA7134_SPECIAL_MODE: 01 (00000001) Changes: State 0 -> State 1: SAA7134_TS_PARALLEL: 04 -> e4 (000-----) SAA7134_TS_PARALLEL_SERIAL: 00 -> bb (0-000-00) SAA7134_TS_SERIAL0: 00 -> 40 (-0------) SAA7134_TS_DMA0: 00 -> 37 (--00-000) SAA7134_TS_DMA1: 00 -> 01 (-------0) 5 changes ---------------------------------------------------------------------------------- SAA7130 Card - State 1: (Whilst watching a channel) SAA7134_GPIO_GPMODE: 00804000 (00000000 10000000 01000000 00000000) SAA7134_GPIO_GPSTATUS: 00847f00 (00000000 10000100 01111111 00000000) SAA7134_ANALOG_IN_CTRL1: 88 (10001000) SAA7134_ANALOG_IO_SELECT: 02 (00000010) SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 00000000) SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 00000000) SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) SAA7134_I2S_OUTPUT_FORMAT: 00 (00000000) SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) SAA7134_I2S_AUDIO_OUTPUT: 00 (00000000) SAA7134_TS_PARALLEL: e4 * (11100100) (was: 04) SAA7134_TS_PARALLEL_SERIAL: bb * (10111011) (was: 00) SAA7134_TS_SERIAL0: 40 * (01000000) (was: 00) SAA7134_TS_SERIAL1: 00 (00000000) SAA7134_TS_DMA0: 37 (00110111) (was: 00) SAA7134_TS_DMA1: 01 (00000001) (was: 00) SAA7134_TS_DMA2: 00 (00000000) SAA7134_SPECIAL_MODE: 01 (00000001) Changes: State 1 -> State 2: SAA7134_TS_PARALLEL: e4 -> 04 (111-----) (same as 0) SAA7134_TS_PARALLEL_SERIAL: bb -> 00 (1-111-11) (same as 0) SAA7134_TS_SERIAL0: 40 -> 00 (-1------) (same as 0) 3 changes ---------------------------------------------------------------------------------- SAA7130 Card - State 2: (After turning off the TV program) SAA7134_GPIO_GPMODE: 00804000 (00000000 10000000 01000000 00000000) SAA7134_GPIO_GPSTATUS: 00847f00 (00000000 10000100 01111111 00000000) SAA7134_ANALOG_IN_CTRL1: 88 (10001000) SAA7134_ANALOG_IO_SELECT: 02 (00000010) SAA7134_VIDEO_PORT_CTRL0: 00000000 (00000000 00000000 00000000 00000000) SAA7134_VIDEO_PORT_CTRL4: 00000000 (00000000 00000000 00000000 00000000) SAA7134_VIDEO_PORT_CTRL8: 00 (00000000) SAA7134_I2S_OUTPUT_SELECT: 00 (00000000) SAA7134_I2S_OUTPUT_FORMAT: 00 (00000000) SAA7134_I2S_OUTPUT_LEVEL: 00 (00000000) SAA7134_I2S_AUDIO_OUTPUT: 00 (00000000) SAA7134_TS_PARALLEL: 04 (00000100) (was: e4) SAA7134_TS_PARALLEL_SERIAL: 00 (00000000) (was: bb) SAA7134_TS_SERIAL0: 00 (00000000) (was: 40) SAA7134_TS_SERIAL1: 00 (00000000) SAA7134_TS_DMA0: 37 (00110111) SAA7134_TS_DMA1: 01 (00000001) SAA7134_TS_DMA2: 00 (00000000) SAA7134_SPECIAL_MODE: 01 (00000001) end of dump