Compro VideoMate S350
Jump to navigation
Jump to search
DVB-S and hardware analogue card. Supports encoding analogue to Mpeg-4 in addition to Mpeg-2.
Overview/Features
- DVB-S input, DVB-S output, svideo input, composite input, IR input, audio input, audio output
Components Used
Identification
The output of lspci -vvnn
reveals:
05:02.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01) Subsystem: Compro Technology, Inc. Device [185b:c900] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (21000ns min, 8000ns max) Interrupt: pin A routed to IRQ 18 Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
The output of dmesg
reveals:
[ 55.794934] saa7130/34: v4l2 driver version 0.2.14 loaded [ 55.794973] saa7134 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 55.794977] saa7130[0]: found at 0000:05:02.0, rev: 1, irq: 18, latency: 64, mmio: 0xfebffc00 [ 55.794981] saa7130[0]: subsystem: 185b:c900, board: UNKNOWN/GENERIC [card=0,autodetected] [ 55.795024] saa7130[0]: board init: gpio is 84bf00 [ 55.944529] saa7130[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 55.944540] saa7130[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 55.944549] saa7130[0]: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff 00 87 ff ff ff ff [ 55.944558] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 55.944568] saa7130[0]: i2c eeprom 40: ff d6 00 c0 86 1c 02 01 02 ff ff ff ff ff ff ff [ 55.944577] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb [ 55.944586] saa7130[0]: i2c eeprom 60: 30 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 55.944595] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 55.944604] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 55.944614] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 55.944623] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 55.944632] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 55.944641] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 55.944651] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 55.944660] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 55.944671] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 55.944735] saa7130[0]: registered device video0 [v4l2] [ 55.944765] saa7130[0]: registered device vbi0
The output of i2cdetect -l
reveals:
i2c-0 smbus saa7130[0] SMBus adapter
Drivers
Device driver support can be found in this S2API repository [1]