Compro VideoMate E700

From LinuxTVWiki
Revision as of 16:34, 6 April 2010 by Anthrox (talk | contribs) (→‎Components Used)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


This article is a stub or is incomplete.
This article requires expansion. Please help add informative information if you can.


This is a dual-tuner DVB-T PCIe card sold by Compro Technology.

It is currently unsupported under Linux.

Overview/Features

Discuss the features and facets of the device here ... this means you

The device features a power switch pass-through to allow it to turn the host system on automatically either by remote control (via infrared) or by wake-up through the operating system on a timed/schedule basis.

Components Used

list the hardware ICs and modules used by the device here ... this means you

It uses a Micronas APB 7202A PCIe bridge chip.

Micronas APB 7202A open source driver [1]

Identification

provide the relevant output of lspci -vvn or, in the case of usb devices, lsusb -v here ...we're particularly interested in the subsystem IDs ... this means you

`lspci -vvnn` gives:

03:00.0 Multimedia video controller [0400]: Micronas Semiconductor Holding AG Unknown device [18c3:0720]
	Subsystem: Compro Technology, Inc. Unknown device [185b:f000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at f3100000 (32-bit, non-prefetchable) [size=64K]
	Region 1: Memory at f3110000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [58] Express Endpoint IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <64ns, L1 <1us
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
		Link: Latency L0s unlimited, L1 unlimited
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x1

`lshw` gives:

        *-multimedia UNCLAIMED
             description: Multimedia video controller
             product: Micronas Semiconductor Holding AG
             vendor: Micronas Semiconductor Holding AG
             physical id: 0
             bus info: pci@0000:03:00.0
             version: 00
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi pciexpress bus_master cap_list
             configuration: latency=0

Both the above by JesseLukeWalker 19:13, 30 March 2008 (CEST)

Other Images

use the included code to insert other images if necessary ...

Making it Work

Firmware

is there any firmware specific information for this device? if so, list it here ... this means you

Drivers

provide the details of where the drivers and patches and necessary tools are available ... this means you

Sample kernel output

provide the relevant portion of dmesg here

Unable to see anything significant by quickly looking over my `dmesg` output. Please check Discussion page for full output. [by JesseLukeWalker 19:13, 30 March 2008 (CEST)]

Remote Control Support

discuss support for the remote control here

External Links