TerraTec Cinergy Hybrid T USB XS
TerraTec Cinergy Hybrid T USB XS is a USB 2.0 DVB-T device.
There are apparently several slightly different versions of the Cinergy Hybrid T USB XS.
Based on:
- Empiatech Em2880 usb bridge
- Xceive XC3028 tuner and analog IF demodulator
- Zarlink DVB-T demodulator (ZL10353 or MT352, depending upon version)
Both versions of the product that have USB ID 0ccd:0042 are supported in Linux kernel 2.6.31. The version with USB ID 0ccd:005e is not currently supported.
Terratec Cinergy Hybrid T USB XS 00cd:005e
- based on Empiatech Em2882
this device has a hybrid analog and digital tuner (dvb-t), analog teletext, a remote control (similar to the xxs) and analog input for acquisition of from analog video (standard s-video) and audio stereo source through rca connectors. after installation of v4l-dvb the device gets hotter and hotter. May cause damage.
dmesg output
I have a ubuntu lts 10.04 uname -r 2.6.32-32-generic. Still persists problems. With latest update of v4l-dvb drivers (dated 2 July 2011), works better. here is the output:
- em28xx #0: V4L2 device vbi0 deregistered - em28xx #0: V4L2 device video1 deregistered - xc2028 3-0061: destroying instance - usb 1-3: new high speed USB device using ehci_hcd and address 6 - usb 1-3: configuration #1 chosen from 1 choice - em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS (2882) @ 480 Mbps (0ccd:005e, interface 0, class 0) - em28xx #0: chip ID is em2882/em2883 - em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c - em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00 - em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00 - em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 - em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 - em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00 - em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00 - em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00 - em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03 - em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00 - em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00 - em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00 - em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03 - em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 34 00 30 00 32 00 30 00 30 00 - em28xx #0: i2c eeprom f0: 33 00 30 00 31 00 38 00 00 00 00 00 00 00 00 00 - em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x6513b1be - em28xx #0: EEPROM info: - em28xx #0: AC97 audio (5 sample rates) - em28xx #0: 500mA max power - em28xx #0: Table at 0x27, strings=0x409e, 0x1cde, 0x346a - em28xx #0: Identified as Terratec Hybrid XS (em2882) (card=55) - tvp5150 3-005c: chip found @ 0xb8 (em28xx #0) - tuner 3-0061: chip found @ 0xc2 (em28xx #0) - xc2028 3-0061: creating new instance - xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner - usb 1-3: firmware: requesting xc3028-v27.fw - xc2028 3-0061: Error: requesting xc3028-v27.fw not found. - Registered IR keymap rc-terratec-cinergy-xs - input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0/input12 - rc0: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc0 - em28xx #0: Config register raw data: 0xd0 - em28xx #0: AC97 vendor ID = 0xffffffff - em28xx #0: AC97 features = 0x6a90 - em28xx #0: Empia 202 AC97 audio processor detected - tvp5150 3-005c: tvp5150am1 detected. - em28xx #0: v4l2 driver version 0.1.2 - em28xx #0: V4L2 video device registered as video1 - em28xx #0: V4L2 VBI device registered as vbi0 - em28xx-audio.c: probing for em28x1 non standard usbaudio - em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
Successfully created frontends, demuxer, dvr and net. correctly detectded and remote, i am not able hot to prove input component.
- user@user:~$ ls /dev/dvb/* - demux0 dvr0 frontend0 net0
I have tried to extract firmware from the original emBDA.sys, emOEM.sys with any effort (obviusly modyfing hash of each in extract_3028). ANY1 can help me?
- user@user:~$ md5sum em* - d163c2fa32265aacbb1b7eaf613fbdd4 emBDA.sys - 2e7add4f70c336e4e66f68567fef01d5 emOEM.sys
- sudo perl terratec_extract_xc3028* - Ran out of data
the inf windows file report:
- Cinergy Hybrid T USB XS (EM2882 DVB-T & analog & audio , Rev. 3 EM2882) - %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_005E
- [TerraTec.NTx86] - ; Cinergy Hybrid T USB XS (EM2880 DVB-T & analog & USB audio, Rev. 1) - %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0042&MI_00 - ; Cinergy T USB XS (EM2870 DVB-T, Rev. 1) - %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0043 - ; Prodigy - %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0047&MI_00 - ; Cinergy Hybrid T USB XS (EM2880 DVB-T & analog & USB audio, Rev. 2 audio AM/stereo demodulator for France) - %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_004C&MI_00 - ; Cinergy T USB XS (EM2870 DVB-T, Rev.2 with Microtune tuner) - %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\USB\VID_0CCD&PID_004E - ; Cinergy Analog USB XS (EM2860 Analog + USB audio) - %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_004F&MI_00 - ; Cinergy Hybrid T USB XS (EM2882 DVB-T & analog & audio , Rev. 3 EM2882) - %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_005E - ; Cinergy Hybrid T USB XS FM (EM2883 DVB-T & analog TV/FM & audio) - %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0072 - ; Cinergy HTC USB XS (EM2885 DVB-T & DVB-C & analog TV/FM & audio) - %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_008E - ; Cinergy Hybrid T USB XS FM Rev. 2 (EM2883 DVB-T & analog TV/FM & audio) - %Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0092
- ==============================================================================
- Cinergy XS Series
- Driver Install Script (32 bit)
- Copyright (c) 2008-09, TerraTec Electronic GmbH
- ------------------------------------------------------------------------------
- History
- ------------------------------------------------------------------------------
- 31-Oct-08 FMB 1st driver v.5.08.0630.00
- 22-Jan-09 FMB new driver v.5.08.1107.00 - 1st version with real DVB-C BDA device
- 20-Feb-09 FMB new driver v.5.09.0220.00 - Fixed FM and RDS which was corrupted in v.5.08.1107.00
- 03-Mar-09 FMB new driver v.5.09.0304.00 - added option to override NEC mode from 2-byte to 4-byte
- ------------------------------------------------------------------------------
- Notes
- ------------------------------------------------------------------------------
- ==============================================================================
[Version] Signature = "$CHICAGO$" Class = Media ClassGUID = {4d36e96c-e325-11ce-bfc1-08002be10318} Provider = %Provider% DriverVer = 03/04/2009, 5.09.0304.00 CatalogFile = Cinergy_XS_Series.cat
[SourceDisksNames] 1 = %DiskName%,,
[SourceDisksFiles] emPRP.ax = 1 emOEM.sys = 1 emBDA.sys = 1 emAudio.sys = 1 emMON.exe = 1 merlinC.rom = 1
[DestinationDirs] Cinergy.CopySys = 12 ; driver files
Cinergy.CopyDll32 = 11 ; 32-bit DLLs
[ControlFlags] ExcludeFromSelect = *
[Manufacturer]
%Provider% = TerraTec, NTx86
[TerraTec.NTx86]
- Cinergy Hybrid T USB XS (EM2880 DVB-T & analog & USB audio, Rev. 1)
%Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0042&MI_00
- Cinergy T USB XS (EM2870 DVB-T, Rev. 1)
%Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0043
- Prodigy
%Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0047&MI_00
- Cinergy Hybrid T USB XS (EM2880 DVB-T & analog & USB audio, Rev. 2 audio AM/stereo demodulator for France)
%Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_004C&MI_00
- Cinergy T USB XS (EM2870 DVB-T, Rev.2 with Microtune tuner)
%Cinergy.DeviceDesc% = Cinergy.NTx86,USB\USB\VID_0CCD&PID_004E
- Cinergy Analog USB XS (EM2860 Analog + USB audio)
%Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_004F&MI_00
- Cinergy Hybrid T USB XS (EM2882 DVB-T & analog & audio , Rev. 3 EM2882)
%Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_005E
- Cinergy Hybrid T USB XS FM (EM2883 DVB-T & analog TV/FM & audio)
%Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0072
- Cinergy HTC USB XS (EM2885 DVB-T & DVB-C & analog TV/FM & audio)
%Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_008E
- Cinergy Hybrid T USB XS FM Rev. 2 (EM2883 DVB-T & analog TV/FM & audio)
%Cinergy.DeviceDesc% = Cinergy.NTx86,USB\VID_0CCD&PID_0092
[Cinergy.NTx86] Include = ks.inf, kscaptur.inf, ksfilter.inf, bda.inf, wdmaudio.inf Needs = KS.Registration, KSCAPTUR.Registration.NT, BDA.Installation.NT, WDMAUDIO.Registration.NT DelReg = OEM.DelReg, UTL.DelReg AddReg = Cinergy.AddReg, OEM.AddReg, OEM.Defaults.AddReg, UTL.AddReg CopyFiles = Cinergy.CopySys, Cinergy.CopyDll32, UTL.CopyList RegisterDlls = Cinergy.RegisterDlls
[Cinergy.CopySys] emBDA.sys emOEM.sys merlinC.rom
[Cinergy.CopyDll32] emPRP.ax
[Cinergy.RegisterDlls]
- ===============================================================
- R e g i s t r y
- ===============================================================
[Cinergy.AddReg] HKR,,DevLoader,,*NTKERN
- HKR,,Driver,,emBDA.sys
HKR,,NTMPDriver,,emBDA.sys
- HKR,,OkToHibernate ,3,1
- HKR,,PageOutWhenUnopened ,3,0
- HKR,,DontSuspendIfStreamsAreRunning,3,1
HKR,,HardwareConfig,1,1
- IBDA2800CustomProp
HKCR,CLSID\{846A4C4E-76D8-42ec-A333-121F365A4DA8},,,%CustomPlugIn% HKCR,CLSID\{846A4C4E-76D8-42ec-A333-121F365A4DA8}\InprocServer32,,,emPRP.ax HKCR,CLSID\{846A4C4E-76D8-42ec-A333-121F365A4DA8}\InprocServer32,ThreadingModel,,Both
- This IID is aggregated for the filter given the CLSID of the property set
HKLM,System\CurrentControlSet\Control\MediaInterfaces\{846A4C4E-76D8-42ec-A333-121F365A4DA8},,,%CustomPlugIn% HKLM,System\CurrentControlSet\Control\MediaInterfaces\{846A4C4E-76D8-42ec-A333-121F365A4DA8},IID,1,4e,4c,6A,84, d8,76, ec,42, 0xa3, 0x33, 0x12, 0x1f, 0x36, 0x5a, 0x4d, 0xa8
- Video Image Property Page
HKCR,CLSID\{7F229794-410B-4e67-B492-4C80C2843871},,,%CustomPropPage% HKCR,CLSID\{7F229794-410B-4e67-B492-4C80C2843871}\InprocServer32,,,emPRP.ax HKCR,CLSID\{7F229794-410B-4e67-B492-4C80C2843871}\InprocServer32,ThreadingModel,,Both
- Associate property set with property page
HKLM,System\CurrentControlSet\Control\MediaSets\{846A4C4E-76D8-42ec-A333-121F365A4DA8}\PropertyPages\{7F229794-410B-4e67-B492-4C80C2843871},,,%CustomPropPage%
- Register Audio Pin Names
HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%PinNameGuid.AnalogAudioIn% ,"Name",,%PinName.AnalogAudioIn% HKLM,SYSTEM\CurrentControlSet\Control\MediaCategories\%PinNameGuid.AnalogAudioOut% ,"Name",,%PinName.AnalogAudioOut%
- --------------------- U T I L ---------------------------
[UTL.DelReg] HKLM, %AUTORUN%, emMON
[UTL.AddReg]
- HKLM, %AUTORUN%, emMON,,"emMON.exe"
[UTL.CopyList] emMON.exe
- ------------------------- O E M ------------------------
[OEM.DelReg] HKR,settings\OEMSettings
[OEM.AddReg]
- The sub-section below adds the driver configurations, regardless of
- EEPROM's presence. These configurations are not specified in EEPROM.
- ===== BEGIN =====
HKR,settings\OEMSettings,Optimization ,0x00010001,1 ; 1=ISO, 2=Bulk HKR,settings\OEMSettings,FixUpOWC ,0x00010001,12 ; HKR,settings\OEMSettings,FixUpATI ,0x00010001,0 ; 1=enabled for multiple root hubs HKR,settings\OEMSettings,EnablePAL640x576 ,0x00010001,0 ; For 2820/2840 HKR,settings\OEMSettings,XceiveMTS ,0x00010001,0 ; XC3028 Baseband Audio HKR,settings\OEMSettings,IRType ,0x00010001,0x44 ; [3:0] 0x4=NEC-4, [6] 0x1=4-byte
- HKR,settings\OEMSettings,OemID ,0x00010001,0 ;
- HKR,settings\OEMSettings,BufferCount ,0x00010001,16 ; for CAP/VBI
- HKR,settings\OEMSettings,BufferCountTS ,0x00010001,16 ; for TS
- HKR,settings\OEMSettings,BufferCountAudio ,0x00010001,16 ; for Audio
- HKR,settings\OEMSettings,StrictHeader ,0x00010001,0 ;
- HKR,settings\OEMSettings,PowerControl ,0x00010001,0 ;
- HKR,settings\OEMSettings,MaximumSS ,0x00010001,32 ; Max Signal Strength
- HKR,settings\OEMSettings,XC5000FMInput ,0x00010001,0 ; 1=RF1, 2=RF2
- HKR,settings\OEMSettings,NXP18271FMInput ,0x00010001,9 ; 1=RF1, 2=RF2
- HKR,settings\OEMSettings,NXP18271FMThreshold,0x00010001,0x0fffff;
- DRXJ IF Level Threshold
HKR,settings\OEMSettings,DRXJIFLevelThreshold,0x00010001,0
- Additional delay required before reading Freq Offset (ms).
- HKR,settings\OEMSettings,FreqOffsetDelay,0x00010001,0
- AC97 source balance adjustments - valid range 0..127
- HKR,settings\OEMSettings,AC97VolumeTV,0x00010001,64 ;
- HKR,settings\OEMSettings,AC97VolumeFM,0x00010001,64 ;
- HKR,settings\OEMSettings,AC97VolumeLN,0x00010001,64 ; Line IN
- Demod AGC Target
- HKR,settings\OEMSettings,AGCTarget6_352,0x00010001,40; 352, 6 MHz
- HKR,settings\OEMSettings,AGCTarget7_352,0x00010001,40; 352, 7 MHz
- HKR,settings\OEMSettings,AGCTarget8_352,0x00010001,40; 352, 8 MHz
- HKR,settings\OEMSettings,AGCTarget6_353,0x00010001,49; 353, 6 MHz
- HKR,settings\OEMSettings,AGCTarget7_353,0x00010001,49; 353, 7 MHz
- HKR,settings\OEMSettings,AGCTarget8_353,0x00010001,49; 353, 8 MHz
- VBI Parameters
- HKR,settings\OEMSettings,VBIMinStart,0x00010001,454
- HKR,settings\OEMSettings,VBIMaxStart,0x00010001,1000
- HKR,settings\OEMSettings,VBIActualStart,0x00010001,950
- HKR,settings\OEMSettings,VBIActualEnd,0x00010001,6373
- DAT Threshold
- HKR,settings\OEMSettings,DATThreshold352,0x00010001,60
- HKR,settings\OEMSettings,DATThreshold353,0x00010001,60
- QT1010 LNA & PCB Options
HKR,settings\OEMSettings,QT1010LNA ,0x00010001,0 ; 1=enabled HKR,settings\OEMSettings,QT1010V3 ,0x00010001,1 ; 0/1/2/3
- GPIO for AM DEMOD
HKR,settings\OEMSettings,AMDEMOD,0x00010001,2 ; 2=GPIO2, 6=GPIO6
- ATSC Default Mode
HKR,settings\OEMSettings,ATSCMode ,0x00010001,0 ; 0=VSB8, 1=QAM64, 2=QAM256
- MCE
HKR,settings\OEMSettings,IsMCE ,0x00010001,2 ; 1=MCE, 0=non-MCE, ; 2=use EEPROM setting
- HKLM,SYSTEM\CurrentControlSet\Services\USB28xxBGA\Settings\OEM,MVBroadcast,0x00010001,0
- 2nd instance of anolog video
- HKR,settings\OEMSettings,MaxRawFormat ,0x00010001,16 ;max bpp allowed
- HKR,settings\OEMSettings,EnableVBI2 ,0x00010001,1 ;default = EnableVBI1
- (Cinergy XS Series) DRX-K PLL settling time for FM radio (400 msec is default)
HKR,settings\OEMSettings,DRXFMDelay,0x00010001,150
- ===== END =====
- The following configurations are only needed if EEPROM is not present.
- ===== BEGIN =====
- ----- Board Configurations -----
HKR,settings\OEMSettings,Composite,0x00010001,1 ; Composite Input HKR,settings\OEMSettings,SVideo,0x00010001,1 ; S-Video Input HKR,settings\OEMSettings,SonyOnBoard,0x00010001,0 ; Sony Modules
- ----- Driver Configurations -----
HKR,settings\OEMSettings,StrictI2cAccess ,0x00010001,0 ; 0=Normal, 1=Strict HKR,settings\OEMSettings,VideoSwitchMode ,0x00010001,1 ; 0=Freeze, 1=Blackout HKR,settings\OEMSettings,EnableSquarePixel ,0x00010001,1 ; 1=enabled HKR,settings\OEMSettings,Enable704 ,0x00010001,0 ; 1=enabled HKR,settings\OEMSettings,DSFineTune ,0x00010001,1 ; 1=enabled HKR,settings\OEMSettings,GPIObyAP ,0x00010001,0 ; HKR,settings\OEMSettings,TVTuneByAP ,0x00010001,0 ; HKR,settings\OEMSettings,PowerOffIfIdle ,0x00010001,0 ; for TV tuner
- ----- OEM Devices Accessed from Applications Directly -----
HKR,settings\OEMSettings,Oem0I2C ,0x00010001,0x60 HKR,settings\OEMSettings,Oem0Type ,0x00010001,2 HKR,settings\OEMSettings,Oem1I2C ,0x00010001,0x60 HKR,settings\OEMSettings,Oem1Type ,0x00010001,2 HKR,settings\OEMSettings,Oem2I2C ,0x00010001,0x60 HKR,settings\OEMSettings,Oem2Type ,0x00010001,2 HKR,settings\OEMSettings,Oem3I2C ,0x00010001,0x60 HKR,settings\OEMSettings,Oem3Type ,0x00010001,2
- ----- Tuner CFG & Overrides -----
- HKR,settings\OEMSettings,TunerIDBase ,0x00010001,0
- HKR,settings\OEMSettings,TunerID7 ,0x00010001,21 ;CFG7 = SAM9082
- ----- USB/Ext Audio Mux for 2820/2840 Only -----
- HKR,settings\OEMSettings,USBAudioMux ,0x00010001,1
- HKR,settings\OEMSettings,ExtAudioMux ,0x00010001,2
- ===== END =====
- This section provides property defaults for the BDA driver.
- If EEPROM is on board, some of these property defaults are provided
- by EEPROM. The remaining property defaults are specified here.
- A property default is only meaningful if the corresponding property
- is not yet defined in the system registry.
[OEM.Defaults.AddReg] HKR,settings\PropDefaults,Brightness ,0x00010001,128 ; HKR,settings\PropDefaults,Contrast ,0x00010001,32 ; HKR,settings\PropDefaults,Hue ,0x00010001,64 ; HKR,settings\PropDefaults,Saturation ,0x00010001,32 ; HKR,settings\PropDefaults,Sharpness ,0x00010001,2 ; HKR,settings\PropDefaults,Gamma ,0x00010001,50 ;
HKR,settings\PropDefaults,Mirror ,0x00010001,0 ; 0=OFF, 1=ON HKR,settings\PropDefaults,Flip ,0x00010001,0 ; 0=OFF, 1=ON HKR,settings\PropDefaults,AutoExposure ,0x00010001,1 ; 0=OFF, 1=ON HKR,settings\PropDefaults,AEMode ,0x00010001,1 ; 0=Dark, 1=Normal HKR,settings\PropDefaults,AE_Level ,0x00010001,3 ; Target AE (0-6) HKR,settings\PropDefaults,Exposure ,0x00010001,4 ; HKR,settings\PropDefaults,LightTemperature ,0x00010001,0 ; HKR,settings\PropDefaults,LightFreq ,0x00010001,1 ; 0=60Hz, 1=50Hz HKR,settings\PropDefaults,AutoWhiteBalance ,0x00010001,1 ; 0=OFF , 1=ON HKR,settings\PropDefaults,AWB_R ,0x00010001,32 ; HKR,settings\PropDefaults,AWB_B ,0x00010001,32 ; HKR,settings\PropDefaults,WindowSize ,0x00010001,0 ; 0=640x480, 1=320x240, 2=1280x960 HKR,settings\PropDefaults,MonitorType ,0x00010001,0 ; 0=CRT, 1=LCD HKR,settings\PropDefaults,Volume ,0x00010001,0 ;
HKR,settings\PropDefaults,VideoStandard ,0x00010001,0x10 ; 1=NTSC, 0x10=PAL_B, 0x40000=SECAM_L HKR,settings\PropDefaults,Deinterlace ,0x00010001,1 ; 1=Weave, 2=Bob HKR,settings\PropDefaults,VCRMask ,0x00010001,0 ; # of lines masked out HKR,settings\PropDefaults,MaskColor ,0x00010001,1 ; 0=Gray, 1=Black
- ===============================================================
- I n t e r f a c e s
- ===============================================================
[Cinergy.NTx86.Interfaces] AddInterface=%KSCATEGORY_AUDIOCAP% ,%REFGUID_AUDIO% ,Audio_Interface
AddInterface=%KSCATEGORY_VIDEO% ,%REFGUID_CAPTURE% ,AnalogCapture_Interface AddInterface=%KSCATEGORY_CAPTURE% ,%REFGUID_CAPTURE% ,AnalogCapture_Interface AddInterface=%KSCATEGORY_TVTUNER% ,%REFGUID_TVTUNER% ,AnalogTvTuner_Interface AddInterface=%KSCATEGORY_CROSSBAR% ,%REFGUID_CROSSBAR% ,AnalogCrossbar_Interface AddInterface=%KSCATEGORY_TVAUDIO% ,%REFGUID_TVAUDIO% ,AnalogTvAudio_Interface
AddInterface=%KSCATEGORY_BDA_RECEIVER%,%REFGUID_BDA_RECEIVER% ,BdaReceiver_Interface AddInterface=%KSCATEGORY_BDA_TUNER% ,%REFGUID_BDA_TUNER_T% ,BdaTunerT_Interface AddInterface=%KSCATEGORY_BDA_TUNER% ,%REFGUID_BDA_TUNER_C% ,BdaTunerC_Interface
- ---------------------------------------------------------------
- WDM streaming interfaces (audio)
- ---------------------------------------------------------------
[Audio_Interface] AddReg=Audio_Interface.AddReg
[Audio_Interface.AddReg] HKR,,CLSID,,%PROXY_CAPTURE% HKR,,FriendlyName,,%DShow.AudioCapture%
- ---------------------------------------------------------------
- WDM streaming interfaces (analog TV/capture)
- ---------------------------------------------------------------
[AnalogCapture_Interface] AddReg=AnalogCapture_Interface.AddReg
[AnalogCapture_Interface.AddReg] HKR,,CLSID,,%PROXY_CAPTURE% HKR,,FriendlyName,,%DShow.AnalogCapture% HKLM,%Name.Key%,"DSName",0,%DShow.AnalogCapture%
- IAMVideoCompression installed as static interface on both output pins
HKR,PinFactory\0\Interfaces\{C6E13343-30AC-11d0-A18C-00A0C9118956},,,{C6E13343-30AC-11d0-A18C-00A0C9118956} HKR,PinFactory\1\Interfaces\{C6E13343-30AC-11d0-A18C-00A0C9118956},,,{C6E13343-30AC-11d0-A18C-00A0C9118956}
[AnalogTvTuner_Interface]
AddReg=AnalogTvTuner_Interface.AddReg
[AnalogTvTuner_Interface.AddReg] HKR,,CLSID,,%PROXY_TVTUNER% HKR,,FriendlyName,,%DShow.AnalogTvTuner%
[AnalogCrossbar_Interface] AddReg=AnalogCrossbar_Interface.AddReg
[AnalogCrossbar_Interface.AddReg] HKR,,CLSID,,%PROXY_CROSSBAR% HKR,,FriendlyName,,%DShow.AnalogCrossbar%
[AnalogTvAudio_Interface] AddReg=AnalogTvAudio_Interface.AddReg
[AnalogTvAudio_Interface.AddReg] HKR,,CLSID,,%PROXY_TVAUDIO% HKR,,FriendlyName,,%DShow.AnalogTvAudio%
- ---------------------------------------------------------------
- BDA interfaces
- ---------------------------------------------------------------
[BdaReceiver_Interface] AddReg=BdaReceiver_Interface.AddReg
[BdaReceiver_Interface.AddReg] HKR,,CLSID,,%PROXY_CAPTURE% HKR,,FriendlyName,,%DShow.DigitalCapture%
[BdaTunerT_Interface] AddReg=BdaTunerT_Interface.AddReg
[BdaTunerT_Interface.AddReg] HKR,,CLSID,,%PROXY_CAPTURE% HKR,,FriendlyName,,%DShow.DigitalTunerT%
[BdaTunerC_Interface] AddReg=BdaTunerC_Interface.AddReg
[BdaTunerC_Interface.AddReg] HKR,,CLSID,,%PROXY_CAPTURE% HKR,,FriendlyName,,%DShow.DigitalTunerC%
- ===============================================================
- S e r v i c e s
- ===============================================================
[Cinergy.NTx86.HW] AddReg = InstLowerFilter
[InstLowerFilter] HKR,,"LowerFilters",0x00010000,"USB28xxOEM"
[Cinergy.NTx86.Services] AddService = USB28xxBGA, 0x00000002, CinergyCap.ServiceInstall AddService = USB28xxOEM, 0x00000000, CinergyOem.ServiceInstall
[CinergyCap.ServiceInstall] DisplayName = %ServiceCap.FriendlyName% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\emBDA.sys
[CinergyOem.ServiceInstall] DisplayName = %ServiceOem.FriendlyName% ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_DEMAND_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\emOEM.sys
- ===============================================================
- S t r i n g s
- ===============================================================
[Strings]
- ---------------------------------------------------------------
- Non-localizable (Windows)
- ---------------------------------------------------------------
- Registry types
REG_SZ = 0x00000000 REG_MULTI_SZ = 0x00010000 REG_EXPAND_SZ = 0x00020000 REG_DWORD = 0x00010001
- Service
- ServiceType values
SERVICE_KERNEL_DRIVER = 0x00000001 SERVICE_FILE_SYSTEM_DRIVER = 0x00000002 SERVICE_ADAPTER = 0x00000004 SERVICE_RECOGNIZER_DRIVER = 0x00000008 SERVICE_WIN32_OWN_PROCESS = 0x00000010 SERVICE_WIN32_SHARE_PROCESS = 0x00000020 SERVICE_INTERACTIVE_PROCESS = 0x00000100 SERVICE_INTERACTIVE_SHARE_PROCESS= 0x00000120
- Service
- StartType values
SERVICE_BOOT_START = 0x00000000 SERVICE_SYSTEM_START = 0x00000001 SERVICE_AUTO_START = 0x00000002 SERVICE_DEMAND_START = 0x00000003 SERVICE_DISABLED = 0x00000004
- Service
- ErrorControl values
SERVICE_ERROR_IGNORE = 0x00000000 SERVICE_ERROR_NORMAL = 0x00000001 SERVICE_ERROR_SEVERE = 0x00000002 SERVICE_ERROR_CRITICAL = 0x00000003
- DirectShow filter categories DirectShow category name
CLSID_InputAudio = "{33D9A762-90C8-11D0-BD43-00A0C911CE86}" KSCATEGORY_AUDIOCAP = "{33D9A762-90C8-11D0-BD43-00A0C911CE86}" ; Audio Capture Devices KSCATEGORY_AUDIO = "{6994AD04-93EF-11D0-A3CC-00A0C9223196}" KSCATEGORY_RENDER = "{65E8773E-8F56-11D0-A3B9-00A0C9223196}" ; Audio Renderers KSCATEGORY_TOPOLOGY = "{DDA54A40-1E4C-11D1-A050-405705C10000}" ; Audio Mixer Devices
KSCATEGORY_VIDEO = "{6994AD05-93EF-11D0-A3CC-00A0C9223196}" ;
KSCATEGORY_CAPTURE = "{65E8773D-8F56-11D0-A3B9-00A0C9223196}" ; WDM Streaming capture Devices (audio & video) KSCATEGORY_TVTUNER = "{A799A800-A46D-11D0-A18C-00A02401DCD4}" ; WDM Streaming TV Tuner Devices KSCATEGORY_CROSSBAR = "{A799A801-A46D-11D0-A18C-00A02401DCD4}" ; WDM Streaming Crossbar Devices KSCATEGORY_TVAUDIO = "{A799A802-A46D-11D0-A18C-00A02401DCD4}" ; WDM Streaming TV Audio Devices
KSCATEGORY_ENCODER = "{19689BF6-C384-48fd-AD51-90E58C79F70B}" ; WDM Streaming Encoder Devices KSCATEGORY_MULTIPLEXER = "{7A5DE1D3-01A1-452c-B481-4FA2B96271E8}" ; WDM Streaming Multiplexer Devices
KSCATEGORY_BDA_RECEIVER = "{FD0A5AF4-B41D-11D2-9C95-00C04F7971E0}" ; BDA Receiver Component KSCATEGORY_BDA_TUNER = "{71985F48-1CA1-11D3-9CC8-00C04F7971E0}" ; BDA Source Filters
- Proxy CLSIDs (KsProxy.ax)
PROXY_CAPTURE = "{17CCA71B-ECD7-11D0-B908-00A0C9223196}" PROXY_TVTUNER = "{266EEE40-6C63-11cf-8A03-00AA006ECB65}" PROXY_CROSSBAR = "{71F96460-78F3-11D0-A18C-00A0C9118956}" PROXY_TVAUDIO = "{71F96462-78F3-11D0-A18C-00A0C9118956}"
AUTORUN = "Software\Microsoft\Windows\CurrentVersion\Run"
- ---------------------------------------------------------------
- Non-localizable (this driver)
- ---------------------------------------------------------------
- Reference guids
REFGUID_AUDIO = "{8DBF1283-572E-4b01-BFCC-14CFEB772501}"
REFGUID_CAPTURE = "{54353D15-E717-4d94-B574-685CE1A209E9}" REFGUID_TVTUNER = "{12AF27FC-0911-461f-B190-D31117E603D0}" REFGUID_CROSSBAR = "{C2C9FB1B-795C-4b12-ADBE-D87C6A1D08FC}" REFGUID_TVAUDIO = "{08D111EA-EE84-4ddc-99B5-8885C6C64FCB}"
REFGUID_BDA_RECEIVER = "{BC102ACB-6095-451d-8ED6-16CF3C832EBC}" REFGUID_BDA_TUNER_T = "{7C8095AB-C110-40e5-9F4D-310858BBBF64}" REFGUID_BDA_TUNER_C = "{B50B8116-DA24-4f97-80D1-00451702C5F7}" REFGUID_BDA_TUNER_S = "{54FB4E45-D668-4d9f-BCBA-B257E8AFF339}"
- Pin name GUIDS
PinNameGuid.AnalogAudioIn = "{78BA1331-8888-4246-BA66-232430A6A8B7}" PinNameGuid.AnalogAudioOut = "{8E09372B-3FC8-47c9-B1D3-1DF12A7817FC}"
- Pin names
PinName.AnalogAudioIn = "Analog Audio In" PinName.AnalogAudioOut = "Audio"
Name.Key = "Software\USB2800\BDA" CustomPlugIn = "emPRP Custom Interface" CustomPropPage = "emPRP Custom Property Page"
- ---------------------------------------------------------------
- Localizable
- ---------------------------------------------------------------
Provider = "TerraTec " DiskName = "Cinergy Driver CD"
- Service strings
ServiceCap.FriendlyName = "Cinergy XS Capture service" ServiceOem.FriendlyName = "CInergy XS OEM service"
- Device Manager
Cinergy.DeviceDesc = "Cinergy XS Series"
- DirectShow filter names
DShow.AudioCapture = "Cinergy XS Series Audio" ; KSCATEGORY_AUDIO
DShow.AnalogCapture = "Cinergy XS Series Analog Capture" ; KSCATEGORY_CAPTURE DShow.AnalogTvTuner = "Cinergy XS Series Analog TV Tuner" ; KSCATEGORY_TVTUNER DShow.AnalogCrossbar = "Cinergy XS Series Analog Crossbar" ; KSCATEGORY_CROSSBAR DShow.AnalogTvAudio = "Cinergy XS Series Analog TV Audio" ; KSCATEGORY_TVAUDIO
DShow.DigitalCapture = "Cinergy XS Series Digital Capture" ; KSCATEGORY_BDA_RECEIVER(BDA Receiver Component) DShow.DigitalTunerT = "Cinergy XS Series DVB-T Tuner" ; KSCATEGORY_BDA_TUNER (BDA Source Filters) DShow.DigitalTunerC = "Cinergy XS Series DVB-C Tuner" ; KSCATEGORY_BDA_TUNER (BDA Source Filters)
Photographs and other info about version 0ccd:005e
The version with usb identifier 0ccd:005e (aka the "PAL-BG/Germany new version TT") seems to feature the Zarlink 10353 DVB-T demodulator (it has the WJCE6353).
Front
Back
Side
Printed on both the PCBs, near the USB connector:
AD803053T-A3
Bottom v.1.1
On the bigger integrated on the middle:
WJCE6353
W620AA46
(M)(C)'05 (e3)
(This seems a chip from intel for DVB-T demodulation http://intel.industrialpartner.com/semiconductors/wjce6353.htm)
The little chip with the yellow spot (first part of the 3rd line is partially unreadable):
ATMEL640
24C02BN
?U18
The even smaller chip near the USB connector:
PI3C3
306LE
dmesg output
This is the dmesg output plugging the USB device, taken with the 2.4.27 kernel from ArchLinux x86_64.
- usb 2-4: new high speed USB device using ehci_hcd and address 5 - usb 2-4: configuration #1 chosen from 1 choice - em28xx new video device (0ccd:005e): interface 0, class 255 - em28xx Doesn't have usb audio class - em28xx #0: Alternate settings: 8 - em28xx #0: Alternate setting 0, max size= 0 - em28xx #0: Alternate setting 1, max size= 0 - em28xx #0: Alternate setting 2, max size= 1448 - em28xx #0: Alternate setting 3, max size= 2048 - em28xx #0: Alternate setting 4, max size= 2304 - em28xx #0: Alternate setting 5, max size= 2580