Leadtek WinFast DTV Dongle Mini D
A DVB-T USB Adapter from Leadtek.
The Winfast DTV Dongle Mini D is supported by various third party driver collections and after certain edits.
Overview/Features
- USB interface
- Inputs: MCX (Micro Co-Axial) Antenna Socket
- Bundle: Supplied with MCX to Belling lee (or other depending on region) adapter.
- Miniature Aerial.
- Miniature remote and battery.
Components Used
- Fitipower FC0012 (tuner)
- RealTek RTL2832U (demodulator)
Other Images
VideoMate DVB-T220 Box
VideoMate DVB-T220 Remote
Identification
Bus 001 Device 002: ID 0413:6f0f Leadtek Research, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0413 Leadtek Research, Inc.
idProduct 0x6f0f
bcdDevice 1.00
iManufacturer 1 realtek
iProduct 2 WinFast Dongle mini D
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 USB2.0-Bulk&Iso
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 5 Bulk-In, Interface
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 2
Device Status: 0x0000
(Bus Powered)
Making it Work
Support for this device is patchy. It does not work out-of-the-box on linux version 3.2.0-32. However, support has been provided by the OpenPLI team. For my device, I retrieved the source from Ambrosa's Code and added the device ID to rtl2832u.c and rtl2832u.h. However, the OpenPLI patch to the stock kernel code is reported to support this device. Support may be in later kernels.
Firmware
The stock firmware in the default tree works fine for this device.
Drivers
The driver that works with this device is dvb_usb_rtl2832u.
Sample Kernel Output
[ 8961.388767] dvb-usb: found a 'USB DVB-T Device' in warm state. [ 8961.388773] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 8961.390414] DVB: registering new adapter (USB DVB-T Device) [ 8961.390450] IR NEC protocol handler initialized [ 8961.392375] IR RC5(x) protocol handler initialized [ 8961.393674] IR RC6 protocol handler initialized [ 8961.394921] IR JVC protocol handler initialized [ 8961.399346] IR Sony protocol handler initialized [ 8961.401363] IR MCE Keyboard/mouse protocol handler initialized [ 8961.402718] lirc_dev: IR Remote Control driver registered, major 250 [ 8961.402858] IR LIRC bridge handler initialized [ 8961.407638] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s) [ 8961.635010] RTL2832U check_tuner_type : FC0012 tuner on board... [ 8962.197130] DVB: registering adapter 2 frontend 0 (Realtek DVB-T RTL2832)... [ 8962.197302] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/input/input11 [ 8962.198130] dvb-usb: schedule remote query interval to 287 msecs. [ 8962.198135] dvb-usb: USB DVB-T Device successfully initialized and connected. [ 8962.198174] usbcore: registered new interface driver dvb_usb_rtl2832u
Remote Control Support
Support for the remote control has not been tested.