TechniSat CableStar Combo HD CI

From LinuxTVWiki
Jump to navigation Jump to search

A DVB-C USB device from TechniSat.

Overview/Features

A combined DVB-C and DVB-T USB 2.0 box (standard definition and high definition). The device contains a common interface slot and an integrated infrared receiver. A remote control is included.

It is currently not supported in current releases of Linux.

Components Used

DRX 3913 JKA 2

http://www.tridentmicro.com/producttree/tv/dtv/drx/drx-39xyk/

CY7C68013A

http://www.cypress.com/?rid=38801

EPM3128ATC144-10N

http://www.altera.com/cgi-bin/devsearch.pl?col=corp&qt=EPM3128

Identification

The USB id of this device is 14f7:0003

Making it Work

The Window drivers for this devices from TechniSat is named UDST7000Bda.sys, the same as the driver for the Technisat SkyStar USB 2 HD CI and TerraTec S7 DVB-S devices. These devices are supported by Linux with the az6027 driver. This gives some hope towards future Linux support for this device.

Firmware

dvb-usb-terratec-h7-drxk.fw from http://linuxtv.org/downloads/firmware/ 0

Drivers

As the TechniSat CableStar Combo HD CI is a clone of the Terratec T7 card which is supported in the kernel v3.9.2 some small patches are needed to get the card working.

Log from initialization on kernel 3.9.2:

[ 5846.524448] usb 1-1.1: dvb_usb_v2: found a 'Technisat Combo HD CI' in cold state
[ 5846.524477] usb 1-1.1: dvb_usb_v2: downloading firmware from file 'dvb-usb-terratec-h7-az6007.fw'
[ 5846.542443] usb 1-1.1: dvb_usb_v2: found a 'Technisat Combo HD CI' in warm state
[ 5847.759051] usb 1-1.1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 5847.759077] DVB: registering new adapter (Technisat Combo HD CI)
[ 5847.761918] usb 1-1.1: dvb_usb_v2: MAC address: c2:f7:14:03:00:00
[ 5847.763861] drxk: frontend initialized.
[ 5847.763975] usb 1-1.1: DVB: registering adapter 0 frontend 0 (DRXK)...
[ 5847.764816] drxk: Could not load firmware file dvb-usb-terratec-h7-drxk.fw.
[ 5847.764819] drxk: Copy dvb-usb-terratec-h7-drxk.fw to your hotplug directory!
[ 5847.765331] mt2063_attach: Attaching MT2063
[ 5847.765339] usb 1-1.1: dvb_usb_v2: 'Technisat Combo HD CI' successfully initialized and connected
[ 5847.813453] drxk: status = 0x639130d9
[ 5847.813458] drxk: detected a drx-3913k, spin A3, xtal 27.000 MHz
[ 5847.975123] DRXK driver version 0.9.4300
[ 6062.180856] mt2063: detected a mt2063 B3

lsusb:

Bus 001 Device 006: ID 14f7:0003 TechniSat Digital GmbH CableStar Combo HD CI
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x14f7 TechniSat Digital GmbH
  idProduct          0x0003 CableStar Combo HD CI
  bcdDevice            0.03
  iManufacturer           1 TechniSat Digital S.A.
  iProduct                2 CableStar Combo HD CI
  iSerial                 3 0008C9D91C8F
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval             100
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Patch

This are the needed patchs for the kernel 3.9.2 to get the device working.

dvb-usb-ids.h

--- linux-3.9.2/drivers/media/dvb-core/dvb-usb-ids.h	2013-05-11 16:19:28.000000000 +0200
+++ dvb-usb-ids.h	2013-05-16 22:57:24.040221334 +0200
@@ -366,6 +366,7 @@
 #define USB_PID_TERRATEC_DVBS2CI_V2			0x10ac
 #define USB_PID_TECHNISAT_USB2_HDCI_V1			0x0001
 #define USB_PID_TECHNISAT_USB2_HDCI_V2			0x0002
+#define USB_PID_TECHNISAT_USB2_HDCI_V3                  0x0003
 #define USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2		0x0004
 #define USB_PID_TECHNISAT_USB2_DVB_S2			0x0500
 #endif

az6007.c

--- linux-3.9.2/drivers/media/usb/dvb-usb-v2/az6007.c	2013-05-11 16:19:28.000000000 +0200
+++ az6007.c	2013-05-16 22:54:43.145236251 +0200
@@ -875,6 +875,8 @@
 		&az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)},
 	{DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_H7_2,
 		&az6007_props, "Terratec H7", RC_MAP_NEC_TERRATEC_CINERGY_XS)},
+	{DVB_USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI_V3,
+                &az6007_props, "Technisat Combo HD CI", RC_MAP_NEC_TERRATEC_CINERGY_XS)},
 	{0},
 };

External Links