LinuxTVWiki:Sandbox
A DVB-T USB device from Leadtek.
| Vendor Device/Model |
Supported | ID on Interface |
Hardware | Firmware | Comment / Pictures | URL | E |
|---|
Overview/Features
- Supplied with a remote control.
Components Used
- Afatech AF9035 demodulator and USB bridge
- Dual ITE Tech IT9135 tuners
Identification
The USB ID is:
- 0413:6a05
Driver Installation
By default the driver is not supported in the kernel and must be installed separately.
To install the driver you will need your kernel headers and other software requirements installed, as listed here
To install the firmware driver enter the following commands into a terminal:
$ su # cd /lib/firmware/ # wget -O dvb-usb-af9035-02.fw http://palosaari.fi/linux/v4l-dvb/firmware/af9035/dvb-usbaf9035-02.fw_3735d499d945a6bb873a7f3ad5c701fa_12.13.15.0_6.20.15.0
Your TV tuner's demodulator and USB Bridge firmware driver is installed. The next step is to install the driver for the dual ITE Tech IT9135 tuners.
To install the tuner firmware driver, enter the following commands into a terminal:
# cd /lib/firmware/ # wget https://github.com/OpenELEC/dvb-firmware/raw/master/it9135/dvb-usb-it9135-01.fw
Your dual ITE Tech IT9135 tuners are installed now! Next, we need to obtain, patch and build the latest V4L-DVB source code to recognise the Leadtek WinFast DTV Dongle Dual. To do this, we adapt the ["Basic" build Approach] following the instructions in the "README.patches" file that we obtain along with the rest of the V4L source code, via git.
First, we obtain the source code unpatched.
$ mkdir dvb-git $ cd dvb-git $ git clone git://linuxtv.org/media_build.git
Then we obtain the patch by Antti Palosaari to get the device recognised. View the patch commit and paste the patch contents into a newly created "winfast-dual.patch" file, in the "backports" directory.
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
index 1ea17dc..73ce27b 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -1511,6 +1511,8 @@ static const struct usb_device_id af9035_id_table[] = {
/* XXX: that same ID [0ccd:0099] is used by af9015 driver too */
{ DVB_USB_DEVICE(USB_VID_TERRATEC, 0x0099,
&af9035_props, "TerraTec Cinergy T Stick Dual RC (rev. 2)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a05,
+ &af9035_props, "Leadtek WinFast DTV Dongle Dual", NULL) },
{ }
};
MODULE_DEVICE_TABLE(usb, af9035_id_table);
Save the file.
We need to also edit "backports.txt" as instructed by the "README.patches" file, so that the build script knows to apply the patch.
The backports.txt file should be modified to included an entry, like so:
[YOUR KERNEL VERSION GOES HERE - FIND IT WITH THE "uname -r" COMMAND] add winfast_dual.patch # Winfast Dual Dongle patch
Once the file is edited and saved, from within the "dvb-git" folder. Execute the command
$ ./build
This will begin building the firmware drivers (if all is as it should be - with the patch included). Watch the terminal output to ensure the af9035.c file is patched correctly, before going any further. If the version number or the name of the .patch file is wrong in the backports.txt file, it won't apply.
To install the compiled patched firmware drivers, execute:
$ sudo make install
$ for file in `find /lib/modules -name "*.ko"`; do if -e $file.gz ; then echo "$file.gz should be removed"; fi; done
If you're happy to automate the removal proccess of any detected conflicting modules, run the following command at your own risk:
$ su# for file in `find /lib/modules -name "*.ko"`; do if -e $file.gz ; then rm "$file.gz"; fi; done
.
Once that's done, restart your computer. Once it reboots check the output of the "dmesg" command. "The Leadtek WinFast DTV Dongle Dual" should be recognised and initialised successfully. During testing, a final restart was required to get MythTV to use the tuner once it was setup in mythtv-setup.
Sample successful "dmesg" output is below:
[ 10.274829] WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer enough quality for its usage in production. Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
80f93c7b0f4599ffbdac8d964ecd1162b8b618b9 [media] media: st-rc: Add ST remote control driver 8ab1aa87f3f7381be195efcabf08dbc74626f25d [media] gpio-ir-recv: Include linux/of.h header b91670a0e924078521a838b9e707e42012c5e76a [media] tvp7002: Include linux/of.h header
[ 10.389333] usb 8-5: dvb_usb_af9035: prechip_version=83 chip_version=01 chip_type=9135 [ 10.389716] usb 8-5: dvb_usb_v2: found a 'Leadtek WinFast DTV Dongle Dual' in warm state [ 10.393908] usb 8-5: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 10.393970] DVB: registering new adapter (Leadtek WinFast DTV Dongle Dual) [ 10.401092] i2c i2c-1: af9033: firmware version: LINK=255.255.255.255 OFDM=2.47.14.0 [ 10.401107] usb 8-5: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))... [ 10.404891] i2c i2c-1: tuner_it913x: ITE Tech IT913X successfully attached [ 10.404902] usb 8-5: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 10.404963] DVB: registering new adapter (Leadtek WinFast DTV Dongle Dual) [ 10.418007] i2c i2c-1: af9033: firmware version: LINK=255.255.255.255 OFDM=2.47.14.0 [ 10.418022] usb 8-5: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))... [ 10.418175] i2c i2c-1: tuner_it913x: ITE Tech IT913X successfully attached [ 10.431106] Registered IR keymap rc-empty [ 10.431259] input: Leadtek WinFast DTV Dongle Dual as /devices/pci0000:00/0000:00:13.2/usb8/8-5/rc/rc0/input6 [ 10.431391] rc0: Leadtek WinFast DTV Dongle Dual as /devices/pci0000:00/0000:00:13.2/usb8/8-5/rc/rc0 [ 10.431399] usb 8-5: dvb_usb_v2: schedule remote query interval to 500 msecs [ 10.431406] usb 8-5: dvb_usb_v2: 'Leadtek WinFast DTV Dongle Dual' successfully initialized and connected [ 10.431468] usbcore: registered new interface driver dvb_usb_af9035