MyGica D690
Jump to navigation
Jump to search
Mygica D690 [1] is a DMB-TH (now known as DTMB) USB TV stick from MyGica, targeting the Hong Kong, Macau and Mainland China market, supporting both multi-subcarrier and single-subcarrier modes. It contains a Realtek RTL2836B DMB-T/H Chipset and a ADMTV804 digital tuner IC. The dongle identifed as Vendor_id(VID)=1f4d and Product_id(PID)=689b. USB_VID_GTEK(VID) also is 1f4d.
I can't make this work as of December 2013. Nor can I find any support for it in the media build/kernel.
Getting the RTL2836B should be not to hard , but no clue on the ADMTV804.
Overview/Features
- USB Interface
- IR Remote
Components Used
Other Images
Identification
dmesg info
[2276641.455645] usb 2-1.4.1.2: new high-speed USB device number 18 using ehci-pci [2276641.545895] usb 2-1.4.1.2: New USB device found, idVendor=1f4d, idProduct=689b [2276641.545908] usb 2-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [2276641.545911] usb 2-1.4.1.2: Product: USB Device [2276641.545914] usb 2-1.4.1.2: Manufacturer: realtek [2276641.545916] usb 2-1.4.1.2: SerialNumber: 00000005
Output from lsusb
Bus 002 Device 019: ID 1f4d:689b G-Tek Electronics Group Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1f4d G-Tek Electronics Group idProduct 0x689b bcdDevice 1.00 iManufacturer 1 iProduct 2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 62 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 4 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 8 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 8 Device Status: 0x0001 Self Powered
Making it Work
Can't make it work yet
Firmware
I don't think this device needs an F/W.
Drivers
Don't know.
Sample Kernel Output
Not working yet..
Remote Control Support
Has a IR remote, untested.