User:Mrdemeanour

Hi, help me please,I do not manage to start the card with the installed firmware must I create a link to the module or someone another option?, I use debian sarge 3.1 .My card is one Club 3D ZAP-TV250mini ,USB2.0/USB1.1,Working with dvb-usb-wt220u-02.fw.

ss3:/lib/firmware/2.6.18.4-686# ls

dvb-usb-wt220u-02.fw dvb-usb-wt220u-01.fw

ss3:/lib/firmware/2.6.18.4-686# cd /usr/lib/hotplug/firmware/2.6.18.4-686/

ss3:/usr/lib/hotplug/firmware/2.6.18.4-686# ls

dvb-usb-wt220u-02.fw dvb-usb-wt220u-01.fw

ss3:/usr/lib/hotplug/firmware/2.6.18.4-686# lsmod | grep dvb dvb_usb_dtt200u 11140 0 dvb_usb 22152 1 dvb_usb_dtt200u usbcore 138564 8 ehci_hcd,usb_storage,usbhid,uhci_hcd,usbvideo,dvb_usb_dtt200u,dvb_usb firmware_class 11200 1 dvb_usb dvb_pll 14788 1 dvb_usb i2c_core 23376 4 i2c_viapro,mt352,dvb_usb,dvb_pll dvb_core 86056 1 dvb_usb

ss3:/usr/lib/hotplug/firmware/2.6.18.4-686# dmesg | grep usb usbcore: registered new driver usbfs usbcore: registered new driver hub usbcore: registered new driver dvb_usb_dtt200u usb usb1: configuration #1 chosen from 1 choice usb usb2: configuration #1 chosen from 1 choice usb 1-1: new low speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice usb 1-2: new full speed USB device using uhci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice usb usb3: configuration #1 chosen from 1 choice

ss3:/usr/lib/hotplug/firmware/2.6.18.4-686# lsusb Bus 005 Device 007: ID 14aa:0220 AVerMedia (again) or C&E Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 003: ID 22b8:4810 Motorola PCS E398 Storage Bus 002 Device 001: ID 0000:0000 Bus 001 Device 004: ID 0566:3002 Monterey International Corp. Bus 001 Device 001: ID 0000:0000 ss3:/usr/lib/hotplug/firmware/2.6.18.4-686#

designs???

Salud ¡¡¡¡