Talk:Dvbscan
Jump to navigation
Jump to search
BIBcom 3000p tuning failed I installed hopefully all necessary drivers and firmware for a DIBcom 3000p DVB-T device on OpenSuse 10.2 system with 2.6.18 Kernel
dmesg says registered and looks fine for the hardware.
My triel ends with no result from dvbscan
I use the local definition from de-Ruhrgebiet for the channel definition.
Do I have all necessary drivers installed for the Kernel ? What can I do to test more ?
regards, Helmut
- CityK 04:12, 29 March 2007 (CEST)
- Was there any message about the device's firmware being loaded in dmesg?
- If that isn't the problem, then my other quick thought is that you have an issue with reception via the antenna.
- Anyway, you should subscribe to the dvb mailing list, or the #linuxtv irc channel and describe your problem -- you will get much
- better support there. The wiki sees low traffic and/or use, as well as being not particularly appropriate as a forum for user troubleshooting
- (whereas the m/l or irc channel are ideal).