Example setups
This page lists example software configurations that you might find helpful as a suggestion of what you can do with your system.
For a complete list of programs, see the commented software list page --- here, you'll find solutions, not just simple programs. For testing purposed or small systems, have a look at the First steps with a budget DVB card.
In order to be most useful for the reader, this page is diveded into three sections:
- setups for full featured cards (DVB cards with hardware decoders)
- setups for budget cards (DVB cards without hardware decoders) -- see here for USB DVB adapters
- setups for analog TV cards (hey, shouldn't that sort of stuff rather be in the video4linux wiki?
A sample solution for a system with a budget DVB card
My system is a Twinhan DTV Mini Ter on a cheap HP Pentium 4 1.2GHz. The graphic card is only an on-board Intel 82810E with shared memory, so nothing fancy.
After installing the card drivers, I tried several solutions. I didn't get the VDR Software Decoder Plugin working so I tried xine -- which worked on the first trial and provides much functionality (for watching) on an easy and intuitive interface.
A sample solution for a system with a full-featured card
My system is a Mythtv pc installed with Fedora Core 6 following this [howto http://www.wilsonet.com/mythtv/fcmyth.php]. I use the Technotrend Premium DVB-C 2300 Hybrid dvb-c card [1] bought from Dvb shop in Germany [2]. I was thinking buying the Technotrend Budget C-1500, but it was out of stock from Dvbshop that time [3].
The Linux 2.6 kernel had already support for Technotrend Premium DVB-C 2300 so the card was autodetected after first time boot. The firmware for the card was not in place so you must download the correct dvb-ttpci-01.fw-2622 (or newer) firmware file from this place [4]. Place this file in the hotplug directory /lib/firmware and rename to dvb-ttpci-01.fw. Change the permission on the file. After a reboot you should get some file in /dev/dvb/adapter0/
(The budget setup above of course also works for FF cards.)
A sample solution for a system with an analog card
write it down if you have one -- I can't do it cause I haven't