Difference between revisions of "AVerMedia M103 (Hybrid) Mini PCI"

From LinuxTVWiki
Jump to: navigation, search
 
m (Voidxor moved page AverMedia M103 (Hybrid) Mini PCI to AVerMedia M103 (Hybrid) Mini PCI: Capitalization consistency)
 
(9 intermediate revisions by 4 users not shown)
Line 1: Line 1:
  +
[[File:AverMedia M103 Hybrid MiniPCI.jpg|thumb|AverMedia M103 (Hybrid) /w u.FL to BNC pigtail]]
[[Image:Kworld_ATSC_115_front.jpg|right|thumb|200px|Example Image: Add a good overall image of what the device looks like here and perhaps a very brief description]]
 
  +
[[File:AverMedia M103 Block Diagram.png|thumb|upright=2.0|Block Diagram]]
  +
[[File:AverMedia M103 CaseStudy.png|thumb|upright=2.0|Case Study]]
   
An [[ATSC]] [[ATSC PCI Cards|PCI card]] from [[KWorld]].
+
The '''AverMedia M103 (Hybrid) Mini PCI''' is a Hybrid [[DVB-T]] [[DVB-T PCI Cards|Mini PCI card]] from [[AVerMedia]].
   
The ATSC 115 is supported under Linux since kernel 2.6.24.
+
The AverMedia M103 is supported under Linux since kernel 2.6.19.
   
  +
==Overview/features==
''Note: The page contents menu will automagically build itself, so you need not worry about it''
 
  +
This device is also known as "AverTV Hybrid DVB-T" or "Avermedia M103 (hybrid)".
   
  +
TV:
==Overview/Features==
 
  +
* Analog TV: Worldwide Analog Access
''Discuss the features and facets of the device here. For example:''<br>
 
  +
* Digital TV: DVB-T
  +
* Stereo Sound: Yes
   
  +
Input/output:
* PCI interface
 
* Inputs: Antenna (Composite), Remote and S-Video In
+
* Inputs: 75 ohm TV Antenna Input
  +
* Outputs: None
{{Note|In essence, this page is a "copy and paste" template which users should use when establishing a new device article by the template (as well as this notice)}}
 
   
  +
Features:
===Components Used===
 
  +
* Windows XP MCE Compliant (XP MCE Certificated)
''List the hardware ICs and modules used by the device here. For example:''<br>
 
  +
* Unbundled Remote Control Supported
* QT1010 (tuner)
 
  +
* PCI v2.3 interface
* Intel/Zarlink MT352 (demodulator)
 
* NXP/Philips SAA7130HL (A/V decoder and PCI Interface)
 
   
  +
{{Note|
===Other Images===
 
  +
* It doesn't have any MPEG-2 HW encoding support.
''Use the included code to insert other images if necessary. Add as many high resolution pictures as you can i.e the card, the original box, the remote and, when uploading the files to the wiki, give them detailed specific names. Note: only use images taken by yourself or those 3rd party images for which you have received express written consent (such as from a vendor) that permits their usage. For example:''<br>
 
  +
* This device has just one input using a BNC to u.FL pigtail, so no any other inputs such FM radio, S-Video and Remote.
<gallery perrow=5>
 
  +
* Also, this devices doesn't have any external Audio/Video outputs, so the Audio should be software piped to an other Audio device}}
Image:VideoMate_DVB-T220_box.jpg|VideoMate DVB-T220 Box
 
Image:VideoMate_DVB-T220_remote.jpg|VideoMate DVB-T220 Remote
 
</gallery>
 
   
===Identification===
 
''Provide here, for PCI/PCIe devices, the relevant output of <code>lspci -vnn</code> or, in the case of USB devices, <code>lsusb -v </code>. We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space. For example:''<br>
 
# sudo lspci -vvnn -s 04:07
 
04:07.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
 
Subsystem: Avermedia Technologies Inc Device [1461:f636]
 
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 
Latency: 64
 
Interrupt: pin A routed to IRQ 17
 
Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
 
Capabilities: [40] Power Management version 2
 
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
 
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 
Kernel driver in use: saa7134
 
Kernel modules: saa7134
 
   
  +
===Components used===
  +
The following ICs and modules are used by the device:
  +
* Philips [[Philips SAA7134|SAA7135H]] - Philips Video Decoder and Broadcast Audio Decoder /w PCI bridge
  +
* [[Zarlink]] [[Zarlink MT352|MT352]] - Silicon Tuner - Zarlink DVB-T Demodulator (Digital Terrestrial TV Demodulator)
  +
* [[Xceive]] [[Xceive XC3018|XC3028]] - Xceive Silicon Tuner (for Hybrid system)
   
==Making it Work==
 
''Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)''
 
   
===Firmware===
+
===Identification===
  +
''The relevant output of <code>lspci -vvnn</code>'<br>
''Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.''
 
  +
# sudo lspci -vvnn -s 04:07
 
  +
04:07.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder '''[1131:7133]''' (rev d1)
===Drivers===
 
  +
Subsystem: Avermedia Technologies Inc Device '''[1461:f636]'''
''Provide the details of where the drivers and patches and necessary tools are available.''
 
  +
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 
  +
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
===Sample Kernel Output===
 
  +
Latency: 64
''Provide the '''relevant''' portion of dmesg here. For example:''<br>
 
  +
Interrupt: pin A routed to IRQ 17
# dmseg
 
  +
Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
[...]
 
[ 26.903212] saa7130/34: v4l2 driver version 0.2.14 loaded
+
Capabilities: [40] Power Management version 2
  +
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
[ 26.904817] saa7134 0000:04:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
 
  +
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[ 26.904831] saa7133[0]: found at 0000:04:07.0, rev: 209, irq: 17, latency: 0, mmio: 0xfd8fe000
 
  +
Kernel driver in use: saa7134
[ 26.904838] saa7134 0000:04:07.0: setting latency timer to 64
 
  +
Kernel modules: saa7134
[ 26.904844] saa7133[0]: subsystem: 1461:f636, board: AVerMedia MiniPCI DVB-T Hybrid M103 [card=145,autodetected]
 
[ 26.904858] saa7133[0]: board init: gpio is 220000
 
[ 27.072671] saa7133[0]: i2c eeprom 00: 61 14 36 f6 00 00 00 00 00 00 00 00 00 00 00 00
 
[ 27.072690] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
 
[ 27.072703] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 0e ff ff ff ff
 
[ 27.072717] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 
[ 27.072730] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
 
[ 27.072743] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 
[ 27.072757] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 
[ 27.072770] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 
[ 27.072783] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 
[ 27.072797] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 
[ 27.072810] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 
[ 27.072823] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 
[ 27.072836] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 
[ 27.072850] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 
[ 27.072863] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 
[ 27.072876] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 
[ 27.116022] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
 
[ 27.128129] saa7133[0]: i2c scan: found device @ 0xc2 [???]
 
[ 27.232043] tuner' 0-0061: chip found @ 0xc2 (saa7133[0])
 
[ 27.495472] xc2028 0-0061: creating new instance
 
[ 27.495481] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
 
[ 27.496778] firmware: requesting xc3028-v27.fw
 
[ 27.849632] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
 
[ 27.868026] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
 
[ 36.508063] (0), id 00000000000000ff:
 
[ 36.508071] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
 
[ 36.676080] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
 
[ 37.116657] saa7133[0]: registered device video0 [v4l2]
 
[ 37.117502] saa7133[0]: registered device vbi0
 
[ 37.144805] saa7134 ALSA driver for DMA sound loaded
 
[ 37.145363] saa7133[0]/alsa: saa7133[0] at 0xfd8fe000 irq 17 registered as card -2
 
[ 37.272116] xc2028 0-0061: attaching existing instance
 
[ 37.272123] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
 
[ 37.272742] DVB: registering new adapter (saa7133[0])
 
[ 37.272749] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
 
[ 37.273160] mt352: mt352_init: hello
 
[ 38.288379] ath0: no IPv6 routers present
 
[...]
 
[ 43.900838] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
 
[ 44.068521] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
 
[ 46.293245] mt352: mt352_init: hello
 
[...]
 
   
===Remote Control Support===
+
==Making it work==
  +
The AverMedia M103 works out of box in {U,{K,Ed,X}u}buntu 8.10.
''Discuss support for the remote control here.''
 
   
  +
===Sample kernel output===
==External Links==
 
  +
If autodetection works you will see the similar output:
''Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example:''<br>
 
  +
# dmseg
* [http://www.comprousa.com/en/product/t100t220/t220.html Compro T-220 product page]
 
  +
[...]
  +
[ 26.903212] saa7130/34: v4l2 driver version 0.2.14 loaded
  +
[ 26.904817] saa7134 0000:04:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  +
[ 26.904831] saa7133[0]: found at 0000:04:07.0, rev: 209, irq: 17, latency: 0, mmio: 0xfd8fe000
  +
[ 26.904838] saa7134 0000:04:07.0: setting latency timer to 64
  +
[ 26.904844] saa7133[0]: subsystem: 1461:f636, board: AVerMedia MiniPCI DVB-T Hybrid M103 [card=145,autodetected]
  +
[ 26.904858] saa7133[0]: board init: gpio is 220000
  +
[ 27.072671] saa7133[0]: i2c eeprom 00: 61 14 36 f6 00 00 00 00 00 00 00 00 00 00 00 00
  +
[ 27.072690] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
  +
[ 27.072703] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 0e ff ff ff ff
  +
[ 27.072717] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  +
[ 27.072730] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
  +
[ 27.072743] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  +
[ 27.072757] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  +
[ 27.072770] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  +
[ 27.072783] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  +
[ 27.072797] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  +
[ 27.072810] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  +
[ 27.072823] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  +
[ 27.072836] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  +
[ 27.072850] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  +
[ 27.072863] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  +
[ 27.072876] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
  +
[ 27.116022] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom]
  +
[ 27.128129] saa7133[0]: i2c scan: found device @ 0xc2 [???]
  +
[ 27.232043] tuner' 0-0061: chip found @ 0xc2 (saa7133[0])
  +
[ 27.495472] xc2028 0-0061: creating new instance
  +
[ 27.495481] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
  +
[ 27.496778] firmware: requesting xc3028-v27.fw
  +
[ 27.849632] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
  +
[ 27.868026] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
  +
[ 36.508063] (0), id 00000000000000ff:
  +
[ 36.508071] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
  +
[ 36.676080] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
  +
[ 37.116657] saa7133[0]: registered device video0 [v4l2]
  +
[ 37.117502] saa7133[0]: registered device vbi0
  +
[ 37.144805] saa7134 ALSA driver for DMA sound loaded
  +
[ 37.145363] saa7133[0]/alsa: saa7133[0] at 0xfd8fe000 irq 17 registered as card -2
  +
[ 37.272116] xc2028 0-0061: attaching existing instance
  +
[ 37.272123] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
  +
[ 37.272742] DVB: registering new adapter (saa7133[0])
  +
[ 37.272749] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
  +
[ 37.273160] mt352: mt352_init: hello
  +
[...]
  +
[ 43.900838] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
  +
[ 44.068521] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
  +
[ 46.293245] mt352: mt352_init: hello
  +
[...]
   
  +
==External links==
  +
* [http://www.avermedia-usa.com//AVerTV/Product/ProductDetail.aspx?Id=371&SI=true AverMedia M103 (Hybrid) product page (USA)]
  +
* [http://ilapstech.blogspot.com/2009/04/my-1st-htpc-part-3-mini-pci-capture.html Some additional information]
   
  +
[[Category:DVB-T PCI Cards]]
''Finally, add anything else that you think might be relevant under an appropriate heading.''
 

Latest revision as of 00:29, 4 December 2016

AverMedia M103 (Hybrid) /w u.FL to BNC pigtail
Block Diagram
Case Study

The AverMedia M103 (Hybrid) Mini PCI is a Hybrid DVB-T Mini PCI card from AVerMedia.

The AverMedia M103 is supported under Linux since kernel 2.6.19.

Overview/features

This device is also known as "AverTV Hybrid DVB-T" or "Avermedia M103 (hybrid)".

TV:

  • Analog TV: Worldwide Analog Access
  • Digital TV: DVB-T
  • Stereo Sound: Yes

Input/output:

  • Inputs: 75 ohm TV Antenna Input
  • Outputs: None

Features:

  • Windows XP MCE Compliant (XP MCE Certificated)
  • Unbundled Remote Control Supported
  • PCI v2.3 interface
Note:
  • It doesn't have any MPEG-2 HW encoding support.
  • This device has just one input using a BNC to u.FL pigtail, so no any other inputs such FM radio, S-Video and Remote.
  • Also, this devices doesn't have any external Audio/Video outputs, so the Audio should be software piped to an other Audio device


Components used

The following ICs and modules are used by the device:

  • Philips SAA7135H - Philips Video Decoder and Broadcast Audio Decoder /w PCI bridge
  • Zarlink MT352 - Silicon Tuner - Zarlink DVB-T Demodulator (Digital Terrestrial TV Demodulator)
  • Xceive XC3028 - Xceive Silicon Tuner (for Hybrid system)


Identification

The relevant output of lspci -vvnn'

#  sudo lspci -vvnn -s 04:07
04:07.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
	Subsystem: Avermedia Technologies Inc Device [1461:f636]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: saa7134
	Kernel modules: saa7134

Making it work

The AverMedia M103 works out of box in {U,{K,Ed,X}u}buntu 8.10.

Sample kernel output

If autodetection works you will see the similar output:

# dmseg
[...]
[   26.903212] saa7130/34: v4l2 driver version 0.2.14 loaded
[   26.904817] saa7134 0000:04:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   26.904831] saa7133[0]: found at 0000:04:07.0, rev: 209, irq: 17, latency: 0, mmio: 0xfd8fe000
[   26.904838] saa7134 0000:04:07.0: setting latency timer to 64
[   26.904844] saa7133[0]: subsystem: 1461:f636, board: AVerMedia MiniPCI DVB-T Hybrid M103 [card=145,autodetected]
[   26.904858] saa7133[0]: board init: gpio is 220000
[   27.072671] saa7133[0]: i2c eeprom 00: 61 14 36 f6 00 00 00 00 00 00 00 00 00 00 00 00
[   27.072690] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[   27.072703] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 0e ff ff ff ff
[   27.072717] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072730] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
[   27.072743] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072757] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072770] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072783] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072797] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072810] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072823] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072836] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072850] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072863] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.072876] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   27.116022] saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
[   27.128129] saa7133[0]: i2c scan: found device @ 0xc2  [???]
[   27.232043] tuner' 0-0061: chip found @ 0xc2 (saa7133[0])
[   27.495472] xc2028 0-0061: creating new instance
[   27.495481] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   27.496778] firmware: requesting xc3028-v27.fw
[   27.849632] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[   27.868026] xc2028 0-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[   36.508063] (0), id 00000000000000ff:
[   36.508071] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
[   36.676080] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[   37.116657] saa7133[0]: registered device video0 [v4l2]
[   37.117502] saa7133[0]: registered device vbi0
[   37.144805] saa7134 ALSA driver for DMA sound loaded
[   37.145363] saa7133[0]/alsa: saa7133[0] at 0xfd8fe000 irq 17 registered as card -2
[   37.272116] xc2028 0-0061: attaching existing instance
[   37.272123] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[   37.272742] DVB: registering new adapter (saa7133[0])
[   37.272749] DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
[   37.273160] mt352: mt352_init: hello
[...]
[   43.900838] xc2028 0-0061: Loading firmware for type=(0), id 0000000100000007.
[   44.068521] xc2028 0-0061: Loading SCODE for type=MONO SCODE HAS_IF_5320 (60008000), id 0000000f00000007.
[   46.293245] mt352: mt352_init: hello
[...]

External links