Anysee E30C Plus: Difference between revisions
Jump to navigation
Jump to search
(regarding the control api) |
(regarding the 32pin IC, better picture coming tomorrow but here are the texts) |
||
| Line 9: | Line 9: | ||
* Microchip 24LC256 (serial EEPROM) ... situated on back side of the PCB directly beneath where the tuner IC would be |
* Microchip 24LC256 (serial EEPROM) ... situated on back side of the PCB directly beneath where the tuner IC would be |
||
* NXP/Philips TDA10023HT (digital demodulator) |
* NXP/Philips TDA10023HT (digital demodulator) |
||
* ? (decoder) .... its a 32pin IC ... meaning it's not the cx25843 as earlier reported. |
* ? (decoder) .... its a 32pin IC ... meaning it's not the cx25843 as earlier reported. better pic upcoming, meanwhile the texts are:"crossS&T, CST56|01, A0616" |
||
* Cypress CY7C63108A (i.e. FX2LP) (USB bridge) |
* Cypress CY7C63108A (i.e. FX2LP) (USB bridge) |
||
* PIC16LF7 (?) ... likely for external audio input or handling of remote control. the device is bundled with a remote control, so probably latter. |
* PIC16LF7 (?) ... likely for external audio input or handling of remote control. the device is bundled with a remote control, so probably latter. |
||
Revision as of 20:30, 17 September 2007
An DVB-C USB 2.0 device from Anysee.
Like other devices from Anysee bearing "Plus" in their product name, a smart card interface is present.
Components Used
- Samsung DTOS403IH102A (tuner module)
- ? (tuner IC)
- ? (analog IF demodulator)
- Microchip 24LC256 (serial EEPROM) ... situated on back side of the PCB directly beneath where the tuner IC would be
- NXP/Philips TDA10023HT (digital demodulator)
- ? (decoder) .... its a 32pin IC ... meaning it's not the cx25843 as earlier reported. better pic upcoming, meanwhile the texts are:"crossS&T, CST56|01, A0616"
- Cypress CY7C63108A (i.e. FX2LP) (USB bridge)
- PIC16LF7 (?) ... likely for external audio input or handling of remote control. the device is bundled with a remote control, so probably latter.
It's apparently based on a conexant reference design (only based), since it uses the same control API (based on usbsnoop logs) with the FX2 chip. The control API should be documented on isely.net and inside cxusb.h.
In the bundled Windows driver/software, there are two firmware files, anyseeAUDB.ROM and anyseeAUDC.ROM, but apparently they have nothing to do with this particular device.
Pics
External Links
- E30C Plus product page (states "external a/v input" which is probably a copy-paste error since the device only has USB connector and Antenna in, like shown in the pics on the same page)