Archived:ASUS P7131 Hybrid-V4L

From LinuxTVWiki
Jump to navigation Jump to search

See also:

Remote control

An IR remote control is supplied. There is a sensor cable that must be plugged into the card.

Card features

  • PCI [1043:4876]
  • Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
  • PAL
  • DVB-T
  • Video/audio decoder:
  • Analog demodulator:
  • TV tuner: ??
  • FM radio chip: ??

ASUS MyCinema P7131 Hybrid

   * 00:0c.0 Multimedia controller: Philips Semiconductors SAA7133 Video Broadcast Decoder (rev d1)
   * saa7134 card=78 tuner=54 # for analog signal 
   * In /usr/src/linux/drivers/media/video/saa7134/saa7134-dvb.c, line 873, struct tda1004x_config philips_tiger_config
   * change the entry
   * .request_firmware = NULL,
   * to
   * .request_firmware = philips_tu1216_request_firmware,
   * run /usr/src/linux/Documentation/dvb/get_dvb_firmware and copy the dvb-fe-tda10046.fw to /lib/firmware
   * modprobe saa7134 card=78 gpio_tracking=1
   * see http://www.spinics.net/lists/vfl/msg27672.html
   * STOP PRESS - the Mercurial version "emerge v4l-dvb-hg" gives the card a proper card number of 112.
   * The card can then be brought up with "modprobe saa7134 card=112 tuner=54 gpio_tracking=1 i2c_scan=1". You may also need to modprobe saa7134-dvb and saa7134-alsa. This works now but may not continue to do so.

Card connectors

  • PAL TV RF signal:
  • DVB-T RF signal:
  • Video Input: S-Video
  • FM radio RF signal: Internal RC jack with flying wire to IEC connector
  • IR-Remote: 2.5mm jack

lspci -v

Module Options

Kernel output

Links