FF Rev. 2.2 DVB-S Cards

Hauppauge Nexus-s Rev. 2.2 Card

A, so called, "full-featured", revision 2.2, DVB-S PCI card.

Linux Support for these cards is quite stable.

Overview/Features

Originally derived from the old Siemens DVB-C card design. The Rev. 2.2 is Sold by:

• Hauppauge as the WinTV-Nexus-S.

Based on an SAA7146 PCI bridge and an onboard AV711x MPEG2 Decoder. Over time these cards have used many different demodulators and tuner modules; some examples include the STV0299 and the TDA8083.

The, so called, "full-featured" cards look quite old-fashioned now, but nonetheless, they have worked reliably for a long time and have been the base for Projects like VDR. However, a major drawback of the "full-featured" card design is the low maximum Bus Bandwidth limit inherent to the AV711x, and which effectively means that, because of this, HDTV receiption or raw MPEG2 Transport Stream access is not possible. Since even MPEG2 decoders implemented in software perform well on HDTV sources when run on modern PC systems, there is usually no need for cards with onboard MPEG2 Decoder today. An exception may be special software that relies on proprietary card features like VDR (although, even in that case, you can also use the VDR Software Decoder Plugin which effectively allows you to use any card you want with VDR)..

A Firmware is required and available for download on http://www.linuxtv.org/.

(stv0299/ALPS BSRU6(tsa5059))
 features: decoder, partialts
 card driver: dvb-ttpci
 interface: PCI
 PCI device id: 1131:7146
 PCI subsystem id: 13c2:0003
 Bridge: Philips SAA7146A
 audio DAC: Crystal CS4341
 frontend possibility 1:
   tin box: ALPS BSRU6
   frontend driver: stv0299
   demodulator location: tin box
   demodulator: ST stv0299b @0x68
   PLL: Philips tsa5059 @0x61
 Notes: This card has the same PCI ID as the other rev2.X DVB-S cards

Also See

• Overview of DVB-S Rev. 2.2 Cards