FF Rev. 2.2 DVB-S Cards
Linux Support for these cards is quite stable.
Originally derived from the old Siemens DVB-C card design. The Rev. 2.2 is Sold by:
- Hauppauge as the WinTV-Nexus-S.
The, so called, "full-featured" cards look quite old-fashioned now, but nonetheless, they have worked reliably for a long time and have been the base for Projects like VDR. However, a major drawback of the "full-featured" card design is the low maximum Bus Bandwidth limit inherent to the AV711x, and which effectively means that, because of this, HDTV receiption or raw MPEG-2 Transport Stream access is not possible. Since even MPEG-2 decoders implemented in software perform well on HDTV sources when run on modern PC systems, there is usually no need for cards with onboard MPEG-2 Decoder today. An exception may be special software that relies on proprietary card features like VDR (although, even in that case, you can also use the VDR Software Decoder Plugin which effectively allows you to use any card you want with VDR)..
A Firmware is required and available for download on http://www.linuxtv.org/.
(stv0299/ALPS BSRU6(tsa5059)) features: decoder, partialts card driver: dvb-ttpci interface: PCI PCI device id: 1131:7146 PCI subsystem id: 13c2:0003 Bridge: Philips SAA7146A audio DAC: Crystal CS4341 frontend possibility 1: tin box: ALPS BSRU6 frontend driver: stv0299 demodulator location: tin box demodulator: ST stv0299b @0x68 PLL: Philips tsa5059 @0x61 Notes: This card has the same PCI ID as the other rev2.X DVB-S cards