Frequency modulation: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
m (+cat)
Line 37: Line 37:


* [[Wikipedia:History_of_radio|A nice introduction to the History of Radio on Wikipedia]]
* [[Wikipedia:History_of_radio|A nice introduction to the History of Radio on Wikipedia]]

[[Category:Technology]]

Revision as of 22:27, 2 April 2005

Frequency Modulation is a Modulation Scheme where the incoming signal modulates the frequency of the Carrier Signal by a tiny fraction. Used e.g. in FM Radio.

A variation of Frequency Modulation is sometimes also used for digital Transmissions, this is then called Frequency Shift Keying or FSK-Modulation.


Visualisation

it would be nice to have a gnuplot picture here, is it possible to upload the gnuplot script for toying, too?


Mathematical Setting

The output voltage of a FM modulator with input voltage <math> u_{in} </math> is described by


<math> u_{out} = sin(2 \pi (f_{carrier} + u_{in} \cdot \Delta f)) </math>


where <math> \Delta f </math> is the frequency deviation from the center frequency at <math> u_{in} = 1V </math>.


Aquired Bandwidth

...can be determined using Carson's Bandwidth Rule: two times sum of the peak deviation <math> \Delta f </math> from the highest frequency occuring in the spectrum of the modulating signal <math> (f_m) </math>:

<math>bandwidth = 2 \ (\Delta f + f_{m}) </math>


Noise Immunity

is higher than the one of Amplitude Modulation Schemes since athmospheric disturbances and noise usually don't shift the frequency of a signal but add their contribution to the amplitude of the transmitted signal. Amplitude variations don't affect FM much.


Links