NetUP Dual Universal CI

From LinuxTVWiki
Revision as of 23:31, 13 February 2015 by Aospan (talk | contribs) (→‎Drivers)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

A DVB-C, DVB-C2, DVB-T, DVB-T2, DVB-S, DVB-S2 PCIe card from NetUP Inc.

PCI-e card supporting DVB-S, DVB-S2, DVB-T, DVB-T2, DVB-C and DVB-C2 with a name that speaks for itself: NetUP Universal Dual DVB-CI. While "Universal" means support of most widely used DVB standards, the word "Dual" stands for 2 DVB tuners + 2 Common Interface (CI) slots on board which is important for simultaneous reception of multiple transponders/multiplexes.

The card is specially designed for professional use and has a very stable driver intended for years of operation without reboot. The driver is available for Linux and Windows which allows to satisfy the demands for various DVB standards and various platforms support. In addition, NetUP provides free technical support during installation and commissioning.

The card is intended for use by both IPTV professionals and enthusiasts for building a huge variety of IPTV products ranging from media centers to IPTV streaming servers. NetUP already uses this card in its own IPTV products like DVB to IP gateway 8x, IPTV Combine 8x, which are being used worldwide.


  • 2 DVB tuners and 2 CI slots
  • professional CAM support
  • DVB-S, DVB-S2, DVB-T, DVB-T2, DVB-C and DVB-C2 support
  • DiSEqC 2.x
  • reliable driver for Linux and Windows
  • FPGA programming support, which allows flexible CAMs and streams management

Components Used

  • Two Sony CXD2841ER demodulators
  • Two Sony CXD2861ER Terrestrial/Cable tuners
  • Two Sony CXD2832AER Satellite tuners
  • Altera FPGA EP4CGX22CF19C8N


PCI id: 1b55:18f6 NetUP Inc. Dual DVB Universal CI card (rev 02)


Linux and Windows open source driver available on product page -

Linux driver will be committed into Linux kernel mainline sources. Patches was sent to on 02 Feb 2015


Firmware is open source (GPLv3) and available on github. More info FPGA_fw_for_NetUP_Dual_Universal_CI

External Links