Pinnacle PCTV (310i): Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
mNo edit summary
mNo edit summary
 
(One intermediate revision by the same user not shown)
Line 82: Line 82:
===Known Bugs===
===Known Bugs===
* With Pinnacle PCTV Hybrid Pro PCI the remote chip on 0x47/0x8e is not detected.
* With Pinnacle PCTV Hybrid Pro PCI the remote chip on 0x47/0x8e is not detected.
<gallery>
[[Image:Pinnacle_PCTV_Hybrid_Pro_PCI.jpg|thumb|250px|Pinnacle PCTV Hybrid Pro PCI]]
Image:Pinnacle_PCTV_Hybrid_Pro_PCI_front.jpg|Pinnacle PCTV Hybrid Pro PCI: front
Image:Pinnacle_PCTV_Hybrid_Pro_PCI_particular.jpg|Pinnacle PCTV Hybrid Pro PCI: particular
Image:Pinnacle_PCTV_Hybrid_Pro_PCI_back.jpg|Pinnacle PCTV Hybrid Pro PCI: back
</gallery>


==External Links==
==External Links==

Latest revision as of 11:36, 20 February 2010

An hybrid Analog/DVB-T PCI card from Pinnacle

It is supported under Linux.

Note: There is currently a bit of info for this device also in the Pinnacle PCTV (310i)-redundant article

Overview/Features

  • PCI Rev. 2.3 interface
  • remote control.

Card connectors:

  • TV signal: IEC connector (PAL/SECAM)
  • Video Inputs: S-Video, Composite Video (RCA socket via adaptor)
  • Audio Outputs: Internal 4 pin header 2.8 mm (to sound board; only required for analogue TV)
  • IR-Remote input: 2.5 mm stereo socket

Components Used

Identification

Outputo of lspci -v

04:08.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
       Subsystem: Pinnacle Systems Inc. Unknown device 002f
       Flags: bus master, medium devsel, latency 32, IRQ 58
       Memory at fdbfe000 (32-bit, non-prefetchable) [size=2K]
       Capabilities: [40] Power Management version 2

Making it Work

Firmware

if you get:

  DVB: registering frontend 0 (Philips TDA10045H DVB-T)...
  tda1004x: waiting for firmware upload (dvb-fe-tda10045.fw)...
  tda1004x: no firmware upload (timeout or file not found?)
  tda1004x: firmware upload failed

you must run the get_dvb_firmware script in v4l-dvb/linux/Documentation/dvb (from mercurial)

  get_dvb_firmware tda10045
  get_dvb_firmware tda10046

and copy the resulting files to /lib/firmware (need to use the chmod)

Drivers

The card should be autodetected.

For the dvb frontend, you may have to load it manually with the module option:

   modprobe saa7134-dvb

Sample Kernel Output

   saa7133[0]: found at 0000:04:08.0, rev: 208, irq: 58, latency: 32, mmio: 0xfdbfe000
   saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
   saa7133[0]: board init: gpio is 600e000
   input: Pinnacle PCTV as /class/input/input3
   ir-kbd-i2c: Pinnacle PCTV detected at i2c-0/0-0047/ir0 [saa7133[0]]
   saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
   saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2c db 54 ff ff
   saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a5 ff 21 00 c2
   saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff ff 0c 22 17 88 03 45 ca 2e
   saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
   tuner 0-004b: chip found @ 0x96 (saa7133[0])
   tuner 0-004b: setting tuner address to 61
   tuner 0-004b: type set to tda8290+75a
   saa7133[0]: registered device video0 [v4l2]
   saa7133[0]: registered device vbi0
   saa7133[0]: registered device radio0
   saa7134 ALSA driver for DMA sound loaded
   saa7133[0]/alsa: saa7133[0] at 0xfdbfe000 irq 58 registered as card -1
   DVB: registering new adapter (saa7133[0]).
   DVB: registering frontend 0 (Philips TDA10046H DVB-T)...

Notes

  • Works for analogue TV AND digital, but FM Radio only works with tuner=38.

Known Bugs

  • With Pinnacle PCTV Hybrid Pro PCI the remote chip on 0x47/0x8e is not detected.

External Links