Pinnacle PCTV Dual Hybrid Pro PCI Express (3010i)

From LinuxTVWiki
Jump to navigation Jump to search


This article is a stub or is incomplete.
This article requires expansion. Please help add informative information if you can.


A hybrid DVB-T PCIe card from Pinnacle.

It is currently not supported under Linux.

Overview/Features

- PCi-express card - 2 independant Hybrid (DVB-T, analog TV, analog Radio) decoders (2x Antenna connector in) - 1 S-video IN - 1 Internal Audio In connector - 1 Internal Audio Out connector - 1 Internal Vidéo In connector - IR Remote control (Receiptor plugs in card by mini-jack connector)


Components Used

Main component :

Chip Philips SAA7162E/G SB4740.1 SB4740.1 Q521HRZ ZSG05391X

+ 2 little chips Philips TDA1004GA SA5727.1 05 ZSG 05141

Identification

Here is the result of the lspci -v command on my PC :

 02:00.0 Multimedia controller: Philips Semiconductors Unknown device 7162
       Subsystem: Pinnacle Systems Inc. Unknown device 0100
       Flags: bus master, fast devsel, latency 0, IRQ 10
       Memory at fdb00000 (64-bit, non-prefetchable) [size=1M]
       Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable-
       Capabilities: [50] Express Endpoint IRQ 0
       Capabilities: [74] Power Management version 2
       Capabilities: [80] Vendor Specific Information

NB: with lspci -vn I have no informations about the card ?

Other Images

Making it Work

Firmware

is there any firmware specific information for this device? if so, list it here ... this means you

Drivers

The directlink driver file is here - WinXP 32bits The homepage of all pinnacle drivers is here

Sample kernel output

provide the relevant portion of dmesg here

Currently, the result of the dmesg command :

link dmesg

Remote Control Support

discuss support for the remote control here

External Links