Talk:TeVii S660

From LinuxTVWiki
Revision as of 12:11, 26 January 2015 by Steltek (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

I own a TERRATEC Cinergy S2 USB HD ( TerraTec Cinergy S2 ) and this device appears to be the same as the TeVii S660. It has the same form factor, connectors are in the same location and it uses the ds3000 and dvb_usb_dw2102 modules.

Kernel messages:

usb 1-2: new high speed USB device using ehci_hcd and address 26
usb 1-2: New USB device found, idVendor=0ccd, idProduct=00a8
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: USB Stick
usb 1-2: Manufacturer: Max
usb 1-2: SerialNumber: 080116
usb 1-2: configuration #1 chosen from 1 choice
dw2102: su3000_identify_state
dvb-usb: found a 'Terratec Cinergy S2 USB HD' in warm state.
dw2102: su3000_power_ctrl: 1, initialized 0
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Terratec Cinergy S2 USB HD)
ff 00 00 00 00 00
ff ff 00 00 00 00
ff ff ff 00 00 00
ff ff ff ff 00 00
ff ff ff ff ff 00
ff ff ff ff ff ff
dvb-usb: MAC address: ff:ff:ff:ff:ff:ff
DS3000 chip version: 0.192 attached.
dw2102: Attached DS3000!
DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:10.3/usb1/1-2/input/input32
dvb-usb: schedule remote query interval to 150 msecs.
dw2102: su3000_power_ctrl: 0, initialized 1
dvb-usb: Terratec Cinergy S2 USB HD successfully initialized and connected.
usbcore: registered new interface driver dw2102

Linux drivers can be downloaded from the TERRATEC website (or simply use the liplianin repository).

The Terratec device suffers from the same DiSEqC switching issues as the TeVii one.