Technisat CableStar HD2: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
===Overview===
===Overview===


Seems to be based on the Twinhan (former Azureweave) AD-CP400 (VP-2040)
Seems to be based on the Twinhan (former Azureweave) [http://www.twinhan.com/product_AD-CP400-2.asp AD-CP400 (VP-2040)]
Uses the [[Philips TDA10021]] Demodulator, [[Phillips CU1216]] Tuner and [[Digimove Mantis]] bridge chip.



===Identification===
===Identification===




$ lspci -vv -s 05:01.0
$ lspci -vv -s 05:01.0
05:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)
05:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)
Subsystem: Device 1ae4:0002
Subsystem: Device 1ae4:0002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 63750ns max)
Latency: 64 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 10
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f8fff000 (32-bit, prefetchable) [size=4K]
Region 0: Memory at f8fff000 (32-bit, prefetchable) [size=4K]

$ lspci -n -s 05:01.0
05:01.0 0480: 1822:4e35 (rev 01)

===Installation===

You need support for I²C in your Kernel for this card to work. Download the necessary mantis-modules from [http://jusst.de/hg/mantis Jusst.de] or use Mercurial:

$ hg clone http://jusst.de/hg/mantis
$ cd mantis
$ make
$ make install

If everything went well, you need to load the following modules:

dvb-core
tda10021
cu1216
mantis
b2c2-flexcop-pci

===Troubleshooting===

I had problems compiling all of the modules in the mantis package from [http://jusst.de/hg/mantis/rev/83e2af36efe7 jusst.de] but i could solve them by doing a make menuconfig and deselecting most modules except those i really needed (see above)


$ lspci -n -s 05:01.0
05:01.0 0480: 1822:4e35 (rev 01)


[[Category:Hardware]]
[[Category:Hardware]]

Revision as of 09:11, 6 September 2008

Overview

Seems to be based on the Twinhan (former Azureweave) AD-CP400 (VP-2040) Uses the Philips TDA10021 Demodulator, Phillips CU1216 Tuner and Digimove Mantis bridge chip.


Identification

 $ lspci -vv -s 05:01.0
   05:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)
   Subsystem: Device 1ae4:0002
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 64 (2000ns min, 63750ns max)
   Interrupt: pin A routed to IRQ 10
   Region 0: Memory at f8fff000 (32-bit, prefetchable) [size=4K]
 $ lspci -n -s 05:01.0
   05:01.0 0480: 1822:4e35 (rev 01)

Installation

You need support for I²C in your Kernel for this card to work. Download the necessary mantis-modules from Jusst.de or use Mercurial:

 $ hg clone http://jusst.de/hg/mantis
 $ cd mantis
 $ make
 $ make install

If everything went well, you need to load the following modules:

 dvb-core
 tda10021
 cu1216
 mantis
 b2c2-flexcop-pci

Troubleshooting

I had problems compiling all of the modules in the mantis package from jusst.de but i could solve them by doing a make menuconfig and deselecting most modules except those i really needed (see above)