TechnoTrend TT-budget S-1500

From LinuxTVWiki
Revision as of 09:17, 22 February 2010 by Tkernen (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

A, so called, Budget or software decoding DVB-S PCI card from TechnoTrend.

Overview

 Card is capable of delivering the full unmodified TS stream to userspace.
 Card can be equipped with a Common Interface for decryption CAMs
 card driver: budget-ci
 interface: PCI
 PCI device id: 1131:7146
 PCI subsystem id: 13c2:1017
 Bridge: Philips SAA7146A
 frontend possibility 1:
   tin box: ALPS BSBE1
   frontend driver: stv0299
   demodulator location: tin box
   demodulator: ?
   PLL: ?
 Notes:
 (BSBE1-502A/SAA7146AH/LNBP21PD)

Images

CAM tests

Using a CAM requires the optional CI extension provided by TechnoTrend.

Feel free to update this table with other types of CAMs.

CAM tests on TechnoTrend S-1500 budget card with CI v 1.0
Type HW version Viaccess version Application version Results
Aston Pro ViAccess ? All ? Working
Aston Pro Irdeto ? ? ? Working, able to decrypt 12 channels simultaneously
Conax 4.xx N/A ? Working
Matrix Reloaded ? N/A ? Working
Cryptoworks ? N/A ? Working
Astoncrypt seca2 1.05 N/A Kaffeine 0.8.3 Working
Official Canal Digitaal/TV Vlaanderen Mediaguard module Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) N/A Kaffeine 0.8.3 Working with corruption
Official Canal Digitaal/TV Vlaanderen Mediaguard module, TV Vlaanderen smartcard Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) N/A MythTV 0.21 Working perfectly, also with simultanious recordings
Matrix Reborn ? N/A Kaffeine 0.8.3 Working
Xcam (X-cam) Angel chip N/A Kaffeine 0.8.3 Working
PowerCAM Pro 2.0.4 2.6 mumudvb 1.5.5 & DVBlast 1.2.0-svn Working decoding full TS with 12 scrambled services
oneCAM 1.0.0 (seems to be PowerCAM Pro clone) 2.6 mumudvb 1.5.5 & DVBlast 1.2.0-svn Working decoding full TS with 12 scrambled services


CAM tests on TechnoTrend S-1500 budget card with CI v 1.1
Type HW version Application version Results
Astoncrypt seca2 1.05 Kaffeine 0.8.3 Working
Xcam (X-cam) Angel chip Kaffeine 0.8.3 Working
Matrix Reborn ? Kaffeine 0.8.3 Working
Official Canal Digitaal/TV Vlaanderen Mediaguard module Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) Kaffeine 0.8.3 Working with corruption
Official Canal Digitaal/TV Vlaanderen Mediaguard module Software: CANALDIGITAAL 1.09.003 (01.09.01.00) Firmware: 1.03.05 Mediaguard version: 1.4.11 (26/06/06) Kaffeine 0.8.6 Most important channels fail
Conax 4.xx gnutv Working
Irdeto Access - CI-module CIM: 49.2.43 CIM SW: IRDETO ACCESS 1.11.003 SoftCell: Ver 2.21A - Demux (SW CA). Compiled Jan 17 2003 14:42:17 gnutv Not working. See below, will work with patch.

Notes: the corruption on the official CDS/TVV module is so bad you can't seriously watch a program with it, but it could be used to update/activate the smartcard. UPDATE: some time has passed, and I'm now running Kaffeine 0.8.6. That most likely has nothing to do with it, but only MTV, RNN7 and Etalagekanaal work now. No more dutch channels, not even NED1. MTV has no corruption though, so I guess that was fixed somewhere.. I suspect this is due to a change in the encryption. On Windows the same issue exists, and the CAM tells me on Windows my card would not be valid for the channel I try to watch. Rubbish, as the CAM shows the same channels perfectly on a standalone Vantage.

CAMs confirmed working after applying any one of this patch (not tried both at the same time, but that seems unnessesary):

http://www.linuxtv.org/pipermail/linux-dvb/2007-July/019116.html

CAM tests on TechnoTrend S-1500 budget card with CI v 1.1, using patch mentioned above
Type HW version Application version Results
Irdeto Access - CI-module Produced by SCM. rev. 1.0 and 1.1 gnutv Cammenu works. Decoding ShowTime Arabia fails. Unknown if cam is supposed to work with ShowTime.
Irdeto Access - CI-module Produced by SMIT. gnutv, test-app (en50221 test app) gnutv fails. CAM demands that display_control_callback is connected.
Conax 4.xx N/A Working for 1.0W Canal Digital
CAM tests on TechnoTrend S-1500 budget card with unknown CI
Type HW version Application version Results
PowerCAM.Pro ? Kaffeine 0.8.3 Working

External Links