TerraTec Cinergy S2

From LinuxTVWiki
Revision as of 08:36, 18 August 2013 by Stev47 (talk | contribs) (Created page with "DVB-S2 USB 2.0 device from TerraTec. Currently supported since Linux Kernel >= 3.10. ==Firmware== <pre> dvb-fe-ds3000.fw </pre> [http://linux.te...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

DVB-S2 USB 2.0 device from TerraTec.

Currently supported since Linux Kernel >= 3.10.

Firmware

dvb-fe-ds3000.fw

Firmware provided by TerraTec

Identification

Revision 1

Revision 2

Bus 002 Device 003: ID 0ccd:00b0 TerraTec Electronic GmbH
[234388.283178] usb 2-1.1: new high-speed USB device number 8 using orion-ehci
[234388.403282] dw2102: su3000_identify_state
[234388.406151] dvb-usb: found a 'Terratec Cinergy S2 USB HD Rev.2' in warm state.
[234388.412082] dw2102: su3000_power_ctrl: 1, initialized 0
[234388.426147] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[234388.434982] DVB: registering new adapter (Terratec Cinergy S2 USB HD Rev.2)
[234388.446538] dvb-usb: MAC address: ff:ff:ff:ff:ff:ff
[234388.466680] DS3000 chip version: 0.192 attached.
[234388.470027] dw2102: Attached DS3000!
[234388.472472] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[234388.497702] input: IR-receiver inside an USB DVB receiver as /devices/platform/orion-ehci.1/usb2/2-1/2-1.1/input/input6
[234388.512965] dvb-usb: schedule remote query interval to 150 msecs.
[234388.517764] dw2102: su3000_power_ctrl: 0, initialized 1
[234388.521957] dvb-usb: Terratec Cinergy S2 USB HD Rev.2 successfully initialized and connected.

External Links