TerraTec Cinergy S2 PCI HD CI: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
 
(9 intermediate revisions by 4 users not shown)
Line 2: Line 2:


=Overview=
=Overview=
[[File:Cinergy_S2_PCI_HD_CI.jpg|100px|thumb|right]]
Seems to be clone of [[Azurewave AD SP400 CI (VP-1041)|AD-SP400 CI (Twinhan VP-1041)]] with other subsystemid.
Seems to be clone of [[Azurewave AD SP400 CI (VP-1041)|AD-SP400 CI (Twinhan VP-1041)]] with other subsystemid.
==Identification==
lspci -v
01:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)
Subsystem: TERRATEC Electronic GmbH Unknown device 1179
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at beaff000 (32-bit, prefetchable) [size=4K]


[http://www.terratec.net/en/products/Cinergy_S2_PCI_HD_CI_1892.html Product information from Terratec] and [http://linux.terratec.de/tv_en.html Terratec linux site]
lspci -vv
01:01.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)
Subsystem: TERRATEC Electronic GmbH Unknown device 1179
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 5
Region 0: Memory at beaff000 (32-bit, prefetchable) [size=4K]


==Identification==
lspci -vn
01:01.0 0480: 1822:4e35 (rev 01)
Subsystem: 153b:1179
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at beaff000 (32-bit, prefetchable) [size=4K]


lspci -vvn
lspci -vvn
Line 33: Line 17:
Interrupt: pin A routed to IRQ 5
Interrupt: pin A routed to IRQ 5
Region 0: Memory at beaff000 (32-bit, prefetchable) [size=4K]
Region 0: Memory at beaff000 (32-bit, prefetchable) [size=4K]

=Making it work=
=Making it work=
Mantis driver is included in kernel version => 2.6.33-rc6.<br>
If you use a lower kernel version, there exists two different drivers you can download and compile. One driver is available at http://jusst.de/hg/mantis-v4l-dvb, and another at http://linuxtv.org/hg/v4l-dvb.

==Installing on Ubuntu Lucid==
Well i found that the old liplianin works far better on Lucid + Kaffeine pre3 then the code from jusst.de .Take it or leave it :)
sudo apt-get install build-essential
sudo apt-get install libncurses5-dev
sudo apt-get install mercurial

cd /usr/src
sudo hg clone http://mercurial.intuxication.org/hg/s2-liplianin
sudo ln -s s2-liplianin s2
cd s2-liplianin
sudo make menuconfig
Find Firedtv and remove it, save and exit.

sudo make -j 10
sudo make install
sudo reboot

==Installing on Ubuntu Karmic Koala with Mantis driver==
sudo apt-get install build-essential
sudo apt-get install libncurses5-dev
sudo apt-get install mercurial

cd /usr/src
sudo hg clone http://jusst.de/hg/mantis-v4l-dvb
cd mantis-v4l-dvb/v4l

make menuconfig
Find Firedtv and disable it.Save and exit.

sudo make -j 10
sudo make install
sudo reboot

after reboot

sudo modprobe stb0899
sudo modprobe stb6100
sudo modprobe lnbp21
sudo modprobe mantis_core
sudo modprobe mantis

To make the modules autoload on system boot you need to edit /etc/modules

gksu gedit /etc/modules

Add the names of the modules and make sure they are in the correct order!

stb0899
stb6100
lnbp21
mantis_core
mantis

Save/exit and reboot

==Installing on Ubuntu Intrepid with Mantis driver ==
==Installing on Ubuntu Intrepid with Mantis driver ==
As of Dec 2009, the card works with the latest v4l-dvb revision.
As of Dec 2009, the card works with the latest v4l-dvb revision.
Line 43: Line 87:
sudo apt-get install mercurial
sudo apt-get install mercurial
sudo hg clone http://jusst.de/hg/mantis-v4l-dvb
sudo hg clone http://jusst.de/hg/mantis-v4l-dvb
cd v4l-dvb/v4l
cd mantis-v4l-dvb/v4l
sudo make
sudo make
sudo make install
sudo make install
sudo reboot
sudo reboot




==Installing on Ubuntu Hardy with Mantis-Multiproto driver ==
==Installing on Ubuntu Hardy with Mantis-Multiproto driver ==
Line 144: Line 186:
tar zxvf szap2-20070727.tgz
tar zxvf szap2-20070727.tgz
cd szap2
cd szap2

=Failed attempts=
==Installing on Debian etch with Twinhan driver - FAILS==
get latest kernel from apt-get
cd /usr/src
wget http://www.twinhan.com/files/AW/Linux/AZLinux_v1.4.2_CI_FC6.tar.gz
tar zxvf AZLinux_v1.4.2_CI_FC6.tar.gz
cd AZLinux_v1.4.2_CI_FC6
apt-get install dvb-utils make gcc binutils autoconf linux-headers-2.6.18-4-all # Readme says, XFree86 will be required too

Install Linux DVB API applications and utilities
cd dvb-apps-997424a1799e
make clean
make
make install
cd ..

Install Azurewave card driver
cd linuxdriver
cd linux/drivers/media/dvb/mantis/
vi mantis_dvb.c
<nowiki>#define MANTIS_VP_1041_DVB_S2 0x0031</nowiki>
change to
<nowiki>#define MANTIS_VP_1041_DVB_S2 0x1179</nowiki>
ln -s /usr/src/linux-headers-2.6.18-4-686 /lib/modules/2.6.18-6-686/build
make fails, because ci-module is missing. See also:
http://www.linuxtv.org/pipermail/linux-dvb/2007-May/018034.html tells, that it is only compilable against fedora core 6 :(.
[[Category:DVB-S PCI Cards]]
[[Category:DVB-S2 PCI Cards]]

Latest revision as of 01:50, 13 March 2010

Overview

Cinergy S2 PCI HD CI.jpg

Seems to be clone of AD-SP400 CI (Twinhan VP-1041) with other subsystemid.

Product information from Terratec and Terratec linux site

Identification

lspci -vvn

 01:01.0 0480: 1822:4e35 (rev 01)
       Subsystem: 153b:1179
       Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
       Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
       Latency: 64 (2000ns min, 63750ns max)
       Interrupt: pin A routed to IRQ 5
       Region 0: Memory at beaff000 (32-bit, prefetchable) [size=4K]

Making it work

Mantis driver is included in kernel version => 2.6.33-rc6.
If you use a lower kernel version, there exists two different drivers you can download and compile. One driver is available at http://jusst.de/hg/mantis-v4l-dvb, and another at http://linuxtv.org/hg/v4l-dvb.

Installing on Ubuntu Lucid

Well i found that the old liplianin works far better on Lucid + Kaffeine pre3 then the code from jusst.de .Take it or leave it :)

sudo apt-get install build-essential
sudo apt-get install libncurses5-dev
sudo apt-get install mercurial
cd /usr/src
sudo hg clone http://mercurial.intuxication.org/hg/s2-liplianin
sudo ln -s s2-liplianin s2
cd s2-liplianin

sudo make menuconfig
Find Firedtv and remove it, save and exit.
sudo make -j 10
sudo make install
sudo reboot

Installing on Ubuntu Karmic Koala with Mantis driver

sudo apt-get install build-essential
sudo apt-get install libncurses5-dev
sudo apt-get install mercurial
cd /usr/src
sudo hg clone http://jusst.de/hg/mantis-v4l-dvb
cd mantis-v4l-dvb/v4l
make menuconfig
Find Firedtv and disable it.Save and exit.
sudo make -j 10
sudo make install
sudo reboot
after reboot
sudo modprobe stb0899
sudo modprobe stb6100
sudo modprobe lnbp21
sudo modprobe mantis_core
sudo modprobe mantis
To make the modules autoload on system boot you need to edit /etc/modules
gksu gedit /etc/modules
Add the names of the modules and make sure they are in the correct order!
stb0899
stb6100
lnbp21
mantis_core
mantis
Save/exit and reboot

Installing on Ubuntu Intrepid with Mantis driver

As of Dec 2009, the card works with the latest v4l-dvb revision.

The procedure is the same as with the AD-SP400 CI (Twinhan VP-1041).

Install driver

cd /usr/src
sudo apt-get install mercurial
sudo hg clone http://jusst.de/hg/mantis-v4l-dvb
cd mantis-v4l-dvb/v4l
sudo make
sudo make install
sudo reboot

Installing on Ubuntu Hardy with Mantis-Multiproto driver

Foreword

This has been tested the 08.06.2008. CAM/CI is not working with current mantis for me. I have a crash when scanning or zapping with the CAM inserted. Take the CAM module out if you have one for the moment!

Install mantis driver (Testing based on revision 7348)

cd /usr/src
sudo apt-get install mercurial
sudo hg clone http://jusst.de/hg/mantis  
sudo nano -w mantis/linux/drivers/media/dvb/mantis/mantis_vp1041.h
  #define MANTIS_VP_1041_DVB_S2    0x0031
  <<change to>>
  #define MANTIS_VP_1041_DVB_S2    0x1179
cd /usr/src/mantis
sudo make
sudo make install
sudo reboot

Installing dvb-apps, replacing scan/szap2 with versions based on the multiproto API (Testing based on revision 1200)

cd /usr/src
sudo hg clone http://linuxtv.org/hg/dvb-apps
cd dvb-apps
make  
cd util  
sudo rm -R scan
sudo wget http://jusst.de/manu/scan.tar.bz2  
sudo tar xjvf scan.tar.bz2  
cd scan  
sudo wget http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080406/a365d65c/attachment.txt
sudo patch -p1 < attachment.txt
sudo nano -w Makefile
add line
     CPPFLAGS += -I/usr/src/mantis/linux/include  
under line
     CPPFLAGS += -I/usr/include/ -DDATADIR=\"$(prefix)/share\"
sudo make clean
sudo make
mkdir ~/.szap
./scan dvb-s/Astra-19.2E > ~/.szap/channels.conf

Use szap2 for tuning

cd /usr/src/dvb-apps/test
./szap2 -r -n 001

Test with mplayer

When szap2 gives you FE_HAS_LOCK then open mplayer:

mplayer /dev/dvb/adapter0/dvr0


Installing on Debian etch with Multiproto driver

updating to lenny

 vi /etc/apt/sources.list 
    change:
       etch -> lenny 
 apt-get update
 apt-get upgrade
 reboot
 
 apt-get install linux-headers-2.6.22-3-686



DVB Utils für DVB-S2

Scan

 wget http://jusst.de/manu/scan.tar.bz2
 tar xjvf scan.tar.bz2
 cd scan
 ./scan dvb-s/Astra-19.2E > ~/channels.conf

If this version of scan gives the following error:

 ioctl DVBFE_GET_INFO failed: Operation not supported
 ERROR: initial tuning failed

Then use the following version of scan:

 http://www.zshare.net/download/1322006118c9c70a/

Wichtig: auf Zeilen wie folgende achten, dann wird auch DVB-S2 erkannt:

----------------------------------> Using 'STB0899 Multistandard' DVB-S2
Tune to frequency 11914500
DVB-S IF freq is 1314500
0x0006 0x0081: pmt_pid 0x0062 PREMIERE -- PREMIERE HD (running, scrambled)
0x0006 0x0082: pmt_pid 0x0063 PREMIERE -- DISCOVERY HD (running, scrambled)
0x0006 0x0084: pmt_pid 0x0065 BetaDigital -- ANIXE HD (running)
0x0006 0x0083: pmt_pid 0x0064 BetaDigital -- ASTRA HD+ (running)

Szap2

wget http://www.makhutov.org/downloads/dvb/szap2-20070727.tgz
tar zxvf szap2-20070727.tgz
cd szap2