TerraTec Cinergy T USB RC: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
(Created page with '{{Device_List_Medium_Detail/Header | content = {{USB_Device_Data |renderwith=Device_List_Medium_Detail/Row |selatt1=did |selval1=terratec-trc-mk2 }} }} === Version 2 AF9015 ===...')
 
No edit summary
Line 10: Line 10:
=== Version 2 AF9015 ===
=== Version 2 AF9015 ===
USB ID: 0ccd:0097
USB ID: 0ccd:0097
Manufacturer: NEWMI


There is a patch available to support this device:
There is a patch available to support this device:
Line 18: Line 19:


Uses tuner NXP TDA18218, which is quite similiar to TDA18271. Preliminary support for this tuner is added with the patch above.
Uses tuner NXP TDA18218, which is quite similiar to TDA18271. Preliminary support for this tuner is added with the patch above.

After applying patch and loading dvb-usb-af9015 you should see the following:
<pre>
usb 3-3: new high speed USB device using ehci_hcd and address 3
usb 3-3: New USB device found, idVendor=0ccd, idProduct=0097
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: USB2.0 DVB-T TV Stick
usb 3-3: Manufacturer: NEWMI
usb 3-3: SerialNumber: xxxxxxxxxxxxxx
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TerraTec Cinergy T Stick RC)
af9013: firmware version:4.95.0
DVB: registering adapter 4 frontend 0 (Afatech AF9013 DVB-T)...
NXP TDA18218 successfully identified.
dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.1/input/input8
generic-usb 0003:0CCD:0097.0002: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-3/input1
</pre>


[[Category: DVB-T USB Devices]]
[[Category: DVB-T USB Devices]]

Revision as of 15:40, 4 January 2011

Vendor
Device/Model
Supported ID on
Interface
Hardware Firmware Comment / Pictures URL E
TerraTec Cinergy T USB RC (mk II) Yes, in kernel since 2.6.37 0ccd:0097 USB2.0 Afatech AF9015A + TDA18218HN + EM24C02A dvb-usb-af9015.fw Dvb-t-usb-terratec-cinergy-T-RC-mk2-001.jpg [1] Jump to the place where you can edit this entry

Version 2 AF9015

USB ID: 0ccd:0097 Manufacturer: NEWMI

There is a patch available to support this device: http://www.mail-archive.com/linux-media@vger.kernel.org/msg16117.html

However, this patch doesnt fit anymore perfectly on 2.6.35.4 due to some changes on IR and there is no official support in dvb-hg; so this patch needs to be adapted and applied. Testing afterwards can be done as usual, for example with tzap, scan or w_scan. Needs also firmware dvb-usb-af9015.fw.

Uses tuner NXP TDA18218, which is quite similiar to TDA18271. Preliminary support for this tuner is added with the patch above.

After applying patch and loading dvb-usb-af9015 you should see the following:

usb 3-3: new high speed USB device using ehci_hcd and address 3
usb 3-3: New USB device found, idVendor=0ccd, idProduct=0097
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: USB2.0 DVB-T TV Stick
usb 3-3: Manufacturer: NEWMI
usb 3-3: SerialNumber: xxxxxxxxxxxxxx
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TerraTec Cinergy T Stick RC)
af9013: firmware version:4.95.0
DVB: registering adapter 4 frontend 0 (Afatech AF9013 DVB-T)...
NXP TDA18218 successfully identified.
dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected.
input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb3/3-3/3-3:1.1/input/input8
generic-usb 0003:0CCD:0097.0002: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-3/input1