Twinhan VP-1030A: Difference between revisions
No edit summary |
No edit summary |
||
| Line 18: | Line 18: | ||
The card in it's full glory. </BR> |
The card in it's full glory. </BR> |
||
[[Image:Vp-1030A-CI.jpg|Description]] |
[[Image:Vp-1030A-CI.jpg|Description]] </BR> |
||
The backside view of the card. </BR> |
The backside view of the card. </BR> |
||
[[Image:Vp-1030A-Back.jpg|Description]] |
[[Image:Vp-1030A-Back.jpg|Description]]</BR> |
||
The CAM removed from the card. </BR> |
The CAM removed from the card. </BR> |
||
[[Image:Vp-1030A.jpg|Description]] |
[[Image:Vp-1030A.jpg|Description]]</BR> |
||
The Irdeto CAM that i |
The Irdeto CAM that i used with the closed source driver. </BR> |
||
[[Image:CI-Irdeto.jpg|Irdeto CAM]] |
[[Image:CI-Irdeto.jpg|Irdeto CAM]] </BR> |
||
Revision as of 11:47, 8 October 2004
DVB-S Budget PCI card by Twinhan Technologies
The only frontend driver for this card is the dst module. The tuner component initialization routines are held in the ASIC in the form of firmware (not reloadable through software). The oldest card in the DVB-S family from Twinhan !
This card uses the bttv driver. Well suppported by LinuxTV drivers.
The Common Interface is not yet supported by the LinuxTV drivers, but only by the closed source drivers under RedHat 9.0 (kernel 2.4.20).
The card is believed to support almost all major CAM's. No separate initialization required for different CAM's, since all the initialization is done in the ASIC's firmware.
required modules and parameters
dvb_core dvb_shutdown_timeout=0
bttv i2c_hw=1 card=0x71
bt878
dst
dvb-bt8xx
The card in it's full glory.
The backside view of the card.
The CAM removed from the card.
The Irdeto CAM that i used with the closed source driver.
