The only frontend driver for this card is the dst module. The tuner component initialization routines are held in the ASIC in the form of firmware (not reloadable through software). The oldest card in the DVB-S family from Twinhan !
This card uses the bttv driver. Well suppported by LinuxTV drivers.
The Common Interface is not yet supported by the LinuxTV drivers, but only by the closed source drivers under RedHat 9.0 (kernel 2.4.20).
The card is believed to support almost all major CAM's. No separate initialization required for different CAM's, since all the initialization is done in the ASIC's firmware.
Required modules and parameters
dvb_core dvb_shutdown_timeout=0 </BR>
bttv i2c_hw=1 card=0x71 </BR>
The card in it's full glory. </BR>
The backside view of the card. </BR>
The CAM removed from the card. </BR>
The Irdeto CAM that i used with the closed source driver. </BR>
Feel free to update this table with other types of CAMs.
|Type||HW version||Viaccess version||Application version||Results|
|SCM Red Viaccess||1.0||?||?||Working, but random failures are observed every few hours with TPS|
|Aston Mediaguard P/N 901274||1.2||?||?||Working, might issue random failures|
|Aston Viaccess Pro||?||?||?||Not working|
As the dst_ca driver is still under development, the results of this page may change.