Twinhan VP-1030A

From LinuxTVWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Introduction

DVB-S Budget PCI card by Twinhan Technologies

The only frontend driver for this card is the dst module. The tuner component initialization routines are held in the ASIC in the form of firmware (not reloadable through software). The oldest card in the DVB-S family from Twinhan !

This card uses the bttv driver. Well suppported by LinuxTV drivers.

The Common Interface is not yet supported by the LinuxTV drivers, but only by the closed source drivers under RedHat 9.0 (kernel 2.4.20).

The card is believed to support almost all major CAM's. No separate initialization required for different CAM's, since all the initialization is done in the ASIC's firmware.

Required modules and parameters

dvb_core dvb_shutdown_timeout=0

bttv i2c_hw=1 card=0x71

bt878

dst

dvb-bt8xx

Photo gallery

The card in it's full glory.

Description

The backside view of the card.

Description

The CAM removed from the card.

Description

The Irdeto CAM that i used with the closed source driver.

Irdeto CAM

CAM tests

Feel free to update this table with other types of CAMs.

CAM tests on Twinhan VP-1030A
Type HW version Viaccess version Application version Results
SCM Red Viaccess 1.0 ? ? Working, but random failures are observed every few hours with TPS
Aston Mediaguard P/N 901274 1.2 ? ? Working, might issue random failures
Aston Viaccess Pro ? ? ? Not working

As the dst_ca driver is still under development, the results of this page may change.