Twinhan VP-1030A

From LinuxTVWiki
Revision as of 11:48, 8 October 2004 by Manu (talk | contribs)
Jump to navigation Jump to search

DVB-S Budget PCI card by Twinhan Technologies

The only frontend driver for this card is the dst module. The tuner component initialization routines are held in the ASIC in the form of firmware (not reloadable through software). The oldest card in the DVB-S family from Twinhan !

This card uses the bttv driver. Well suppported by LinuxTV drivers.

The Common Interface is not yet supported by the LinuxTV drivers, but only by the closed source drivers under RedHat 9.0 (kernel 2.4.20).

The card is believed to support almost all major CAM's. No separate initialization required for different CAM's, since all the initialization is done in the ASIC's firmware.

required modules and parameters

dvb_core dvb_shutdown_timeout=0

bttv i2c_hw=1 card=0x71

bt878

dst

dvb-bt8xx

The card in it's full glory.

Description

The backside view of the card.

Description

The CAM removed from the card.

Description

The Irdeto CAM that i used with the closed source driver.

Irdeto CAM