Difference between revisions of "ULi M920x firmware"
m (fix links)
Revision as of 02:44, 16 August 2007
You can get it either with usbsnoop or snoopypro under Windows. See http://www.linuxtv.org/pipermail/linux-dvb/2006-November/014682.html if you want to use usbmon with vmware player.
Firmware will be sent as soon as you plug in the device, so you should not start any programs. Sticks with remote controller might have program called Uremote.exe (or similar) running. If you do, please shut it down so that it doesn't cause traffic in logs.
m920x firmware consists of a number of 64 byte long usb control messages. After these control messages you will see another control message with request, value, index of M9206_CORE(0x22), 0x01, M9206_FW_GO(0xff69), respectively.
After usb device receives this message, it will disconnect itself from the bus and appear again with (possibly) different idVendor and idProduct. These new ids are known as warm ids. At very least you will see your device having new endpoints that will be used to transmit data.
It's important to have Usbsnoop or Snoopypro installed and logging before you plug in the device. It might take several attempts to get a dump where this firmware is visible.
After acquiring a log with firmware, you will need to process it with various tools.
First with parser.pl and then with m920x_parse (arguments -i us -m fw)
Recompile your kernel with CONFIG_USB_DEVICEFS, CONFIG_USB_MON and CONFIG_DEBUG_FS selected in your kernel config. Then patch linux/drivers/usb/mon/mon_text.c with http://www.rasterburn.org/~aet/m920x/usbmon_ext.diff. Finally make sure that CONFIG_USB_EHCI_HCD is set to m and not y. After rebooting your new kernel, install vmware player and get everything ready on that front. See http://software.newsforge.com/article.pl?sid=06/05/16/1940214 for more details on this.
You will probably need these: (look up with google if interested)
# remove usb 2.0 support. vmware might freak out your computer otherwise rmmod ehci_hcd mount -t debugfs none_debugs /sys/kernel/debug modprobe usbmon mount -t usbfs none /proc/bus/usb # needed by vmware chmod -R a+rw /proc/bus/usb (needed by vmware. security!!)
You need to replug your device after removing ehci_hcd module so your device sees the change. Look at /proc/bus/usb/devices to find in which bus you device is in. cat /sys/kernel/debug/usbmon/nt to a file (n is the bus number). Finally pass this file to m920x_parse (arguments -i um -m fw)
m920x_sp_firmware can only read data in this format: http://www.roback.cc/projects/iRiver/howto/snoopypro/wordpad_saved.png