Zolid Hybrid TV Tuner: Difference between revisions

From LinuxTVWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(29 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[Image:Zolid_Hybrid_TV_Tuner_Overall.jpg|right|thumb|300px|Overall view of the Zolid Hybrid TV Tuner card.]]
{{Note|In essence, this page is a "copy and paste" template which users should use when establishing a new device article within the wiki. Its intended purpose is to serve as the basis for the format/layout of device articles; thereby striving to establish a general consistency throughout the wiki.


A Hybrid TV Tuner from [[Zolid]]. It might be sold in the Netherlands only.
Usage:
* Once you have logged in, simply click the edit tab at the top of this page
* Then from within the editing box at the bottom of the editing page, copy the entire contents of this article
* From within the editing box at the bottom of the new device page you are creating, paste the copied content from the "new device copy and paste template"
* Proceed to fill in the information relevant for the device and delete the italic directional comment sections provided by the template (as well as this notice)}}


The Hybrid TV Tuner is supported by V4l since [http://osdir.com/ml/linux-media/2009-09/txtx4Ndg7lpm4.txt this patch] has been merged with the V4L tree.
''First, if possible, we would like a good overall image of what the device looks like (Note: do NOT use proprietary images unless you have obtained permission to do so). Next, provide a brief summary of what the device is and by whom it is provided (include wiki links to the card type and the vendor -- and, ideally, after you have finished editing this page, you should add links from those pages back to this one). The last introductory piece of information is the all important indication of whether or not the device is supported under Linux. Here's an example:''<br />

[[Image:Kworld_ATSC_115_front.jpg|right|thumb|200px|Example Image: Add a good overall image of what the device looks like here and perhaps a very brief description]]

A [[Hybrid TV Tuner|PCI card]] from [[Zolid]].

The Hybrid TV Tuner is not supported by Linux.

''Note: The page contents menu will automagically build itself, so you need not worry about it''


==Overview/Features==
==Overview/Features==
* Built-in IR transmitter
''Discuss the features and facets of the device here. For example:''<br>
* PCI interface

* Hybrid tuner, it has DVB-T and Analog TV support
* PCI Interface
* Hybrid tuner, both DVB and Analog TV are supported


===Components Used===
===Components Used===
* [[NXP/Philips TDA182xx|NXP TDA18271]] (tuner)
''List the hardware ICs and modules used by the device here. For example:''<br>
* NXP TDA18271 (tuner)
* [[NXP TDA10048]] (demodulator)
* NXP TDA10048 (demodulator)
* [[NXP/Philips TDA8290]] (analog IF demodulator, embedded on the SAA7131E/03/G chip)
* NXP/Philips SAA7131 (A/V decoder and PCI Interface)
* [[Philips SAA7134|NXP/Philips SAA7131E]] (A/V decoder and PCI Interface, compatible with SAA7135)


===Other Images===
===Other Images===
''Use the included code to insert other images if necessary. Add as many high resolution pictures as you can i.e the card, the original box, the remote and, when uploading the files to the wiki, give them detailed specific names. Note: only use images taken by yourself or those 3rd party images for which you have received express written consent (such as from a vendor) that permits their usage. For example:''<br>
<gallery perrow=5>
<gallery perrow=5>
Image:Zolid_Hybrid_TV_Tuner_Box.jpg|Zolid Hybrid TV Tuner, front side of the box.
Image:VideoMate_DVB-T220_box.jpg|VideoMate DVB-T220 Box
Image:Zolid_Hybrid_TV_Tuner_Front.jpg|Zolid Hybrid TV Tuner, front, showing antenna input and IR transmitter
Image:VideoMate_DVB-T220_remote.jpg|VideoMate DVB-T220 Remote
Image:Zolid_Hybrid_TV_Tuner_Overall_Detailed.jpg|Zolid Hybrid TV Tuner, detailed overall view, the chip set-up and their names (edited to make them readable)
</gallery>
</gallery>


===Identification===
===Identification===
<pre>
''Provide here, for PCI/PCIe devices, the relevant output of <code>lspci -vnn</code> or, in the case of USB devices, <code>lsusb -v </code>. We're particularly interested in the subsystem ID's. To make a code block simply make the first character of each line a space. For example:''<br>
lspci -vvvnnxxx
lspci -vvvnnxxx
04:09.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
04:09.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
Line 67: Line 54:
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
</pre>



==Making it Work==
==Making it Work==
This card is working pretty well under Linux with a recent V4L snapshot, or with the patch applied. The tda18271 driver detects the card automatically, although it outputs some cryptical error messages that don't prevent the card from working:
''Is it supported under Linux? Are there experimental drivers? Does it partially work or identify as another card? (if yes, add this information below)''
It is not supported by Linux. The subsystem has two matches, both reference boards: Philips TOUGH DVB-T reference design and Philips EUROPA V3 reference design. This can be found in CARDLIST.saa7134.


<pre>
When loading the saa7134 module with the card parameter 156 (Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid) with firmware installed (see below), the card seems to work, but fails when scanning DVB channels.
tda18271_read_regs: [1-0060|M] ERROR: i2c_transfer returned: -5
tda18271_ir_cal_init: [1-0060|M] error -5 on line 812
tda18271_init: [1-0060|M] error -5 on line 836
tda18271_tune: [1-0060|M] error -5 on line 909
tda18271_set_analog_params: [1-0060|M] error -5 on line 1046
tda18271_write_regs: [1-0060|M] ERROR: idx = 0xc, len = 4, i2c_transfer returned: -5
tda18271_write_regs: [1-0060|M] ERROR: idx = 0x13, len = 1, i2c_transfer returned: -5
tda18271_write_regs: [1-0060|M] ERROR: idx = 0x13, len = 1, i2c_transfer returned: -5
tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5
tda18271_set_analog_params: [1-0060|M] error -5 on line 1046
tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5
</pre>


===Firmware===
===Firmware===
If you see the following message in your system log:
''Is there any firmware specific information for this device? if so, list it here. If your device doesn't require a firmware, simply mention that this is the case.''
The card needs firmware for the TDA10048.
tda10048: firmware upload failed.
You have to install the demodulator's firmware in order to let it work.

The card needs firmware for the TDA10048, which is available [http://steventoth.net/linux/hvr1700/ Here]. Just download the ZIP file and the extract.sh and execute Extract.sh. For more information, please see the readme.txt file.


===Drivers===
===Drivers===
The card uses the built-in V4L saa7134 driver, the tda10048 demodulator driver and the tda18271 tuner driver. The card id to be used with the driver is 173.
''Provide the details of where the drivers and patches and necessary tools are available.''
The card uses the built-in V4L drivers.


===Sample Kernel Output===
===Sample Kernel Output===
dmesg:
''Provide the '''relevant''' portion of dmesg here. For example:''<br>
<pre>
dmesg
[252762.679351] Linux video capture interface: v2.00
2009-05-31 20:42:51 sander-desktop kernel [ 4169.257239] saa7134 ALSA driver for DMA sound unloaded
2009-05-31 20:42:59 sander-desktop kernel [ 4177.629232] saa7130/34: v4l2 driver version 0.2.15 loaded
[252762.742734] saa7130/34: v4l2 driver version 0.2.15 loaded
2009-05-31 20:42:59 sander-desktop kernel [ 4177.629291] saa7133[0]: found at 0000:04:09.0, rev: 209, irq: 17, latency: 32, mmio: 0xfdcfe000
[252762.742868] saa7133[0]: found at 0000:04:00.0, rev: 209, irq: 16, latency: 64, mmio: 0xfebff800
2009-05-31 20:42:59 sander-desktop kernel [ 4177.629297] saa7133[0]: subsystem: 1131:2004, board: UNKNOWN/GENERIC [card=0,autodetected]
[252762.742893] saa7133[0]: subsystem: 1131:2004, board: Zolid Hybrid TV Tuner PCI [card=173,autodetected]
2009-05-31 20:42:59 sander-desktop kernel [ 4177.629548] saa7133[0]: board init: gpio is 4400100
[252762.742952] saa7133[0]: board init: gpio is 240000
[252762.742992] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792034] saa7133[0]: i2c eeprom 00: 31 11 04 20 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792044] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[252762.920036] saa7133[0]: i2c eeprom 00: 31 11 04 20 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792051] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 b2 ff ff ff ff
[252762.920086] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792057] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920131] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 b2 ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792064] saa7133[0]: i2c eeprom 40: ff 35 00 c0 96 10 03 32 21 05 ff ff ff ff ff ff
[252762.920174] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792070] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920217] saa7133[0]: i2c eeprom 40: ff 35 00 c0 96 10 03 32 21 05 ff ff ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792076] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920261] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792083] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920304] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792089] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920348] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792095] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920391] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792102] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920435] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792108] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920478] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792114] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920522] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792120] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920565] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792127] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920609] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792133] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920652] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920695] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792610] saa7133[0]: registered device video0 [v4l2]
[252762.920745] i2c-adapter i2c-1: Invalid 7-bit address 0x7a
2009-05-31 20:42:59 sander-desktop kernel [ 4177.792631] saa7133[0]: registered device vbi0
[252763.042918] tuner 1-004b: chip found @ 0x96 (saa7133[0])
2009-05-31 20:42:59 sander-desktop kernel [ 4177.800153] saa7134 ALSA driver for DMA sound loaded
[252763.210053] tda829x 1-004b: setting tuner address to 60
2009-05-31 20:42:59 sander-desktop kernel [ 4177.800183] saa7133[0]/alsa: saa7133[0] at 0xfdcfe000 irq 17 registered as card -2
[252763.287954] tda18271 1-0060: creating new instance

[252763.372530] TDA18271HD/C2 detected @ 1-0060
[252765.762527] tda18271: performing RF tracking filter calibration
[252798.770028] tda18271: RF tracking filter calibration complete
[252798.880036] tda829x 1-004b: type set to tda8290+18271
[252806.510212] saa7133[0]: registered device video0 [v4l2]
[252806.510320] saa7133[0]: registered device vbi0
[252806.510427] saa7133[0]: registered device radio0
[252806.602675] dvb_init() allocating 1 frontend
[252806.870034] tda829x 1-004b: type set to tda8290
[252806.910424] tda18271 1-0060: attaching existing instance
[252806.910442] DVB: registering new adapter (saa7133[0])
[252806.910457] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
[252807.732531] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
[252807.732552] saa7134 0000:04:00.0: firmware: requesting dvb-fe-tda10048-1.0.fw
[252807.748822] tda10048_firmware_upload: firmware read 24878 bytes.
[252807.748840] tda10048_firmware_upload: firmware uploading
[252812.960053] tda10048_firmware_upload: firmware uploaded
[252813.353639] saa7134 ALSA driver for DMA sound loaded
[252813.353675] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[252813.353724] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 16 registered as card -1
</pre>


===Remote Control Support===
===Remote Control Support===
The default card configuration doesn't detect the built-in IR transmitter.
''Discuss support for the remote control here.''
I haven't tested this yet.


==External Links==
==External Links==
''Provide a link to the vendor's product page here along with any other external link to information that is generally helpful in relation to the device. For example:''<br>

The vender Zolid doesn't have a website.


See the [[Zolid]] page for more information about Zolid and product information. The (almost worthless and Dutch) manual can be found [http://www.unisupport.net/download/50515/50515-manual.pdf Here] and the drivers and software pack for Windows is downloadable [http://www.unisupport.net/download/50515/50515drivers.zip here].
''Finally, add anything else that you think might be relevant under an appropriate heading.''


[[Category:DVB-T PCI Devices]]
''Very last thing is add a catergory. (Remove the nowiki tags). For example''<br>
<nowiki>[[Category:DVB-T PCI Devices]]</nowiki>

Latest revision as of 17:14, 17 December 2009

Overall view of the Zolid Hybrid TV Tuner card.

A Hybrid TV Tuner from Zolid. It might be sold in the Netherlands only.

The Hybrid TV Tuner is supported by V4l since this patch has been merged with the V4L tree.

Overview/Features

  • Built-in IR transmitter
  • PCI interface
  • Hybrid tuner, it has DVB-T and Analog TV support

Components Used

Other Images

Identification

lspci -vvvnnxxx
  04:09.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
        Subsystem: Philips Semiconductors Device [1131:2004]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (21000ns min, 8000ns max)
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fdcfe000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Kernel driver in use: saa7134
        Kernel modules: saa7134
  00: 31 11 33 71 06 00 90 02 d1 00 80 04 00 20 00 00
  10: 00 e0 cf fd 00 00 00 00 00 00 00 00 00 00 00 00
  20: 00 00 00 00 00 00 00 00 00 00 00 00 31 11 04 20
  30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 54 20
  40: 01 00 02 06 00 20 00 1c 00 00 00 00 00 00 00 00
  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Making it Work

This card is working pretty well under Linux with a recent V4L snapshot, or with the patch applied. The tda18271 driver detects the card automatically, although it outputs some cryptical error messages that don't prevent the card from working:

tda18271_read_regs: [1-0060|M] ERROR: i2c_transfer returned: -5
tda18271_ir_cal_init: [1-0060|M] error -5 on line 812
tda18271_init: [1-0060|M] error -5 on line 836
tda18271_tune: [1-0060|M] error -5 on line 909
tda18271_set_analog_params: [1-0060|M] error -5 on line 1046
tda18271_write_regs: [1-0060|M] ERROR: idx = 0xc, len = 4, i2c_transfer returned: -5
tda18271_write_regs: [1-0060|M] ERROR: idx = 0x13, len = 1, i2c_transfer returned: -5
tda18271_write_regs: [1-0060|M] ERROR: idx = 0x13, len = 1, i2c_transfer returned: -5
tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5
tda18271_set_analog_params: [1-0060|M] error -5 on line 1046
tda18271_write_regs: [1-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5

Firmware

If you see the following message in your system log:

tda10048: firmware upload failed.

You have to install the demodulator's firmware in order to let it work.

The card needs firmware for the TDA10048, which is available Here. Just download the ZIP file and the extract.sh and execute Extract.sh. For more information, please see the readme.txt file.

Drivers

The card uses the built-in V4L saa7134 driver, the tda10048 demodulator driver and the tda18271 tuner driver. The card id to be used with the driver is 173.

Sample Kernel Output

dmesg:

[252762.679351] Linux video capture interface: v2.00
[252762.742734] saa7130/34: v4l2 driver version 0.2.15 loaded
[252762.742868] saa7133[0]: found at 0000:04:00.0, rev: 209, irq: 16, latency: 64, mmio: 0xfebff800
[252762.742893] saa7133[0]: subsystem: 1131:2004, board: Zolid Hybrid TV Tuner PCI [card=173,autodetected]
[252762.742952] saa7133[0]: board init: gpio is 240000
[252762.742992] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[252762.920036] saa7133[0]: i2c eeprom 00: 31 11 04 20 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[252762.920086] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[252762.920131] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 b2 ff ff ff ff
[252762.920174] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920217] saa7133[0]: i2c eeprom 40: ff 35 00 c0 96 10 03 32 21 05 ff ff ff ff ff ff
[252762.920261] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920304] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920348] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920391] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920435] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920478] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920522] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920565] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920609] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920652] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920695] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[252762.920745] i2c-adapter i2c-1: Invalid 7-bit address 0x7a
[252763.042918] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[252763.210053] tda829x 1-004b: setting tuner address to 60
[252763.287954] tda18271 1-0060: creating new instance
[252763.372530] TDA18271HD/C2 detected @ 1-0060
[252765.762527] tda18271: performing RF tracking filter calibration
[252798.770028] tda18271: RF tracking filter calibration complete
[252798.880036] tda829x 1-004b: type set to tda8290+18271
[252806.510212] saa7133[0]: registered device video0 [v4l2]
[252806.510320] saa7133[0]: registered device vbi0
[252806.510427] saa7133[0]: registered device radio0
[252806.602675] dvb_init() allocating 1 frontend
[252806.870034] tda829x 1-004b: type set to tda8290
[252806.910424] tda18271 1-0060: attaching existing instance
[252806.910442] DVB: registering new adapter (saa7133[0])
[252806.910457] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
[252807.732531] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)...
[252807.732552] saa7134 0000:04:00.0: firmware: requesting dvb-fe-tda10048-1.0.fw
[252807.748822] tda10048_firmware_upload: firmware read 24878 bytes.
[252807.748840] tda10048_firmware_upload: firmware uploading
[252812.960053] tda10048_firmware_upload: firmware uploaded
[252813.353639] saa7134 ALSA driver for DMA sound loaded
[252813.353675] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[252813.353724] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 16 registered as card -1

Remote Control Support

The default card configuration doesn't detect the built-in IR transmitter.

External Links

See the Zolid page for more information about Zolid and product information. The (almost worthless and Dutch) manual can be found Here and the drivers and software pack for Windows is downloadable here.