Re: dvbd2 - problems

[Karsten Siebert <Karsten.Siebert@dataplanet.net>]

This is still hard coded in dvbd.h. Please check for networkdevice and
change from eth0 to pppX (X whatever you have). The ppp connections has to
up when you start dvbd.

Karsten



----- Original Message -----
From: Mike Neuhaus <neuhaus@ubmail.de>
To: <linux-dvb@linuxtv.org>
Sent: Donnerstag, 1. Juni 2000 10:01
Subject: dvbd2 - problems


> I want to use dvbd2 for my internet - connection, but executing dvbd
results:
>
> Can't get local ip-address. Stop
>
>
> What can i do?
>
> I use ppp for connecting to the isp. Where can i set this for
understanding
> with dvbd.
>  /etc/dvbd.conf is hopefully configured:
>
> # DVB receiver configuration file, (c) 2000 data planet international
> #
> # standard location in /etc
> #
> # LNB power on=1/off=0
> #
> power 1
> #
> # symbol rate [symbol/sec]
> #
> # ASTRA 1E/1F
> #
> # symbolrate 27500000
> #
> # ASTRA 1G/1H
> #
> symbolrate 22000000
> #
> # frequency [kHz]
> #
> # ASTRA TR 103
> #
> # frequency 12461000
> #
> # ASTRA TR 115
> #
> # frequency 12662750
> #
> # ASTRA TR 114
> #
> # frequency 12640000
> #
> # ASTRA TR 113
> #
> frequency 12632250
> #
> # 22 kHz signal on=1/off=0
> #
> ttk 1
> #
> # diseqc on=1/off=0
> #
> diseqc 0
> #
> # AFC on=1/off=0
> #
> AFC 1
> #
> # polarisation H=1/V=0
> #
> polarisation 1
> #
> # settings for MPE filter, PID and MAC filtering, valid MAC bytes
> #
> #
> filter_0 512
> #
> # filter_1 785
> #
> # filter_2 786 01:00:5E:01:0A:01 31
> #
> # filter_3 xxx
> #
> # filter_4 xxx
> #
> # filter_5 xxx
> #
> # filter_6 xxx
> #
> # filter_7 xxx
> #
> # filter_8 xxx
> #
> # filter_9 xxx
> #
>
>