Re: vdr - missed video/audio block

[Michael Holzt <kju@fqdn.org>]

> I used an old machine (PentiumPro 150 Mhz) with an old main
> board that was not DMA-capable on its IDE controller.

Hmm, i use a Cyrix GP 200+ with the Triton 2 Chipset. Although my bios
is too dump to enable DMA i enabled it with hdparm. boonie tells a
throughput of 13 MB/sec for sequential block output, while hdparm -t
reports arround 10 MB/sec.

This values should be enough but i still get the erros.

-- 
Greetings
Michael