[linux-dvb] DVB Driver problem, kernel Module failed to start

[Volker Grabbe <volker@grabbe.com>]

Hello,
i have a problem with the DVB kernel Module. I use Suse 8.1 with a
patched original kernel. I have compiled hte kernel with make oldconfig
after the patch für the VIA VT8235 Southbridge.

i could compile the driver from CVS, at the End it write:

NOTE:  you should configure+build 'apps/tuxzap/ manually

when i compile the driver i got no failure. After tah i start the driver
with make insmod and here i don't know what to do. The Shell output:

/usr/src/linux/scripts/pathdown.sh: line 4: TOPDIR: parameter null or
not set
DIR=`pwd`; (cd /usr/src/linux; make SUBDIRS=$DIR modules)
make[1]: Wechsel in das Verzeichnis »/usr/src/linux-2.4.19.SuSE«
make -C  /home/volker/DVB/driver CFLAGS="-D__KERNEL__
-I/usr/src/linux-2.4.19.SuSE/include  -Wall -Wstrict-prototypes
-Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
-pipe -mpreferred-stack-boundary=2 -march=i586 -DMODULE"
MAKING_MODULES=1 modules
make[2]: Wechsel in das Verzeichnis »/home/volker/DVB/driver«
make[2]: Zirkuläre Datei
/usr/src/linux-2.4.19.SuSE/include/asm/processor.h <-
/usr/src/linux-2.4.19.SuSE/include/linux/list.h Abhängigkeit wird nicht
verwendet.
ld -m elf_i386 -r -o dvb-core.o dmxdev.o dvb_demux.o dvb_net.o dvb_i2c.o
dvb_filter.o dvb_frontend.o dvbdev.o compat.o
make -C av7110 modules
make[3]: Wechsel in das Verzeichnis »/home/volker/DVB/driver/av7110«
make[3]: Zirkuläre Datei
/usr/src/linux-2.4.19.SuSE/include/asm/processor.h <-
/usr/src/linux-2.4.19.SuSE/include/linux/list.h Abhängigkeit wird nicht
verwendet.
ld -m elf_i386 -r -o dvb-ttpci.o saa7146_core.o saa7146_v4l.o av7110.o
av7110_ir.o
make[3]: Verlassen des Verzeichnisses »/home/volker/DVB/driver/av7110«
make -C frontends modules
make[3]: Wechsel in das Verzeichnis »/home/volker/DVB/driver/frontends«
make[3]: Zirkuläre Datei
/usr/src/linux-2.4.19.SuSE/include/asm/processor.h <-
/usr/src/linux-2.4.19.SuSE/include/linux/list.h Abhängigkeit wird nicht
verwendet.
make[3]: Für das Target »modules« gibt es nichts zu tun.
make[3]: Verlassen des Verzeichnisses
»/home/volker/DVB/driver/frontends«
make[2]: Verlassen des Verzeichnisses »/home/volker/DVB/driver«
make[1]: Verlassen des Verzeichnisses »/usr/src/linux-2.4.19.SuSE«

(                                               \
insmod videodev;                                \
                                \
insmod dvb-core.o dvb_shutdown_timeout=0;       \
make -C frontends insmod;                       \
 make -C av7110 insmod; \
)
Using /lib/modules/2.4.19-4GB/kernel/drivers/media/video/videodev.o
insmod: a module named videodev already exists
make[1]: Wechsel in das Verzeichnis »/home/volker/DVB/driver/frontends«
insmod alps_bsru6.o;   insmod alps_bsrv2.o;   insmod alps_tdmb7.o;  
insmod alps_tdlb7.o;   insmod grundig_29504-401.o;   insmod
grundig_29504-491.o;   insmod ves1820.o;
make[1]: Verlassen des Verzeichnisses
»/home/volker/DVB/driver/frontends«
make[1]: Wechsel in das Verzeichnis »/home/volker/DVB/driver/av7110«
insmod input; \
insmod evdev; \
insmod dvb-ttpci.o;
Using /lib/modules/2.4.19-4GB/kernel/drivers/input/input.o
insmod: a module named input already exists
Using /lib/modules/2.4.19-4GB/kernel/drivers/input/evdev.o
insmod: a module named evdev already exists
dvb-ttpci.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
make[1]: *** [insmod] Fehler 1
make[1]: Verlassen des Verzeichnisses »/home/volker/DVB/driver/av7110«
make: *** [insmod] Fehler 2


Where is the mistake? I am newbie so i don't know how.

Could anybody help me?

If i whant to use the driver from Suse and  i type rcdvb start in the
shell, i got this:
Starting DVB/lib/modules/2.4.19-4GB/dvb/dvbdev.o: init_module:
Input/output error
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
insmod: a module named dvb_filter already exists
Warning: loading /lib/modules/2.4.19-4GB/dvb/dmxdev.o will taint the
kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
Module dmxdev loaded, with warnings
insmod: a module named VES1893 already exists
insmod: a module named VES1820 already exists
insmod: a module named L64781 already exists
insmod: a module named SP8870 already exists
insmod: a module named tda8083 already exists
insmod: a module named stv0299 already exists
insmod: a module named tuner already exists
insmod: a module named saa7146_core already exists
insmod: a module named saa7146_v4l already exists
Warning: loading /lib/modules/2.4.19-4GB/dvb/dvb_demux.o will taint the
kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
Module dvb_demux loaded, with warnings
Warning: loading /lib/modules/2.4.19-4GB/dvb/dvb_frontend.o will taint
the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
Module dvb_frontend loaded, with warnings
Warning: loading /lib/modules/2.4.19-4GB/dvb/dvb_net.o will taint the
kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
Module dvb_net loaded, with warnings
/lib/modules/2.4.19-4GB/dvb/dvb.o: couldn't find the kernel version the
module was compiled for
                                                                                                                failed
---------

I thank you for reading this to this point. If anybody can help me,
please do it ;). I whant to use my hardware for VDR.

I have a Technotrend Card Rev. 1.6 with Hardware MPEG Decoder. 

My System:
AMD Athlon XP 1600
256 MB RAM
120GB HDD
GF2MX400
TT DVB Rev. 1.6
SB Live 5.1
Adaptec 2904CD
Realtek 8139C
ITE LPT2 Card

Thanks for your Answer.


Volker Grabbe





-- 
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.