[linux-dvb] Re: DVB Driver problem, kernel Module failed to start

To: Volker Grabbe <volker@grabbe.com>
Subject: [linux-dvb] Re: DVB Driver problem, kernel Module failed to start
From: Holger Waechtler <holger@convergence.de>
Date: Fri, 13 Dec 2002 21:47:06 +0100
Cc: linux-dvb@linuxtv.org
Content-transfer-encoding: quoted-printable
Content-type: text/plain; charset=ISO-8859-15; format=flowed
In-reply-to: <1039811906.1607.49.camel@linux.local>
References: <1039811906.1607.49.camel@linux.local>
Sender: linux-dvb-bounce@linuxtv.org
User-agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2.1) Gecko/20021208 Debian/1.2.1-2

When you built a clean driver and it still does not work please try to 
use another PCI slot, check if you inserted your card properly, try 
other IRQ BIOS settings, remove some of your other PCI cards.

Holger


Volker Grabbe wrote:
> Hello,
> i have a problem with the DVB kernel Module. I use Suse 8.1 with a
> patched original kernel. I have compiled hte kernel with make oldconfig
> after the patch für the VIA VT8235 Southbridge.
> 
> i could compile the driver from CVS, at the End it write:
> 
> NOTE:  you should configure+build 'apps/tuxzap/ manually
> 
> when i compile the driver i got no failure. After tah i start the driver
> with make insmod and here i don't know what to do. The Shell output:
> 
> /usr/src/linux/scripts/pathdown.sh: line 4: TOPDIR: parameter null or
> not set
> DIR=`pwd`; (cd /usr/src/linux; make SUBDIRS=$DIR modules)
> make[1]: Wechsel in das Verzeichnis »/usr/src/linux-2.4.19.SuSE«
> make -C  /home/volker/DVB/driver CFLAGS="-D__KERNEL__
> -I/usr/src/linux-2.4.19.SuSE/include  -Wall -Wstrict-prototypes
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
> -pipe -mpreferred-stack-boundary=2 -march=i586 -DMODULE"
> MAKING_MODULES=1 modules
> make[2]: Wechsel in das Verzeichnis »/home/volker/DVB/driver«
> make[2]: Zirkuläre Datei
> /usr/src/linux-2.4.19.SuSE/include/asm/processor.h <-
> /usr/src/linux-2.4.19.SuSE/include/linux/list.h Abhängigkeit wird nicht
> verwendet.
> ld -m elf_i386 -r -o dvb-core.o dmxdev.o dvb_demux.o dvb_net.o dvb_i2c.o
> dvb_filter.o dvb_frontend.o dvbdev.o compat.o
> make -C av7110 modules
> make[3]: Wechsel in das Verzeichnis »/home/volker/DVB/driver/av7110«
> make[3]: Zirkuläre Datei
> /usr/src/linux-2.4.19.SuSE/include/asm/processor.h <-
> /usr/src/linux-2.4.19.SuSE/include/linux/list.h Abhängigkeit wird nicht
> verwendet.
> ld -m elf_i386 -r -o dvb-ttpci.o saa7146_core.o saa7146_v4l.o av7110.o
> av7110_ir.o
> make[3]: Verlassen des Verzeichnisses »/home/volker/DVB/driver/av7110«
> make -C frontends modules
> make[3]: Wechsel in das Verzeichnis »/home/volker/DVB/driver/frontends«
> make[3]: Zirkuläre Datei
> /usr/src/linux-2.4.19.SuSE/include/asm/processor.h <-
> /usr/src/linux-2.4.19.SuSE/include/linux/list.h Abhängigkeit wird nicht
> verwendet.
> make[3]: Für das Target »modules« gibt es nichts zu tun.
> make[3]: Verlassen des Verzeichnisses
> »/home/volker/DVB/driver/frontends«
> make[2]: Verlassen des Verzeichnisses »/home/volker/DVB/driver«
> make[1]: Verlassen des Verzeichnisses »/usr/src/linux-2.4.19.SuSE«
> 
> (                                               \
> insmod videodev;                                \
>                                 \
> insmod dvb-core.o dvb_shutdown_timeout=0;       \
> make -C frontends insmod;                       \
>  make -C av7110 insmod; \
> )
> Using /lib/modules/2.4.19-4GB/kernel/drivers/media/video/videodev.o
> insmod: a module named videodev already exists
> make[1]: Wechsel in das Verzeichnis »/home/volker/DVB/driver/frontends«
> insmod alps_bsru6.o;   insmod alps_bsrv2.o;   insmod alps_tdmb7.o;  
> insmod alps_tdlb7.o;   insmod grundig_29504-401.o;   insmod
> grundig_29504-491.o;   insmod ves1820.o;
> make[1]: Verlassen des Verzeichnisses
> »/home/volker/DVB/driver/frontends«
> make[1]: Wechsel in das Verzeichnis »/home/volker/DVB/driver/av7110«
> insmod input; \
> insmod evdev; \
> insmod dvb-ttpci.o;
> Using /lib/modules/2.4.19-4GB/kernel/drivers/input/input.o
> insmod: a module named input already exists
> Using /lib/modules/2.4.19-4GB/kernel/drivers/input/evdev.o
> insmod: a module named evdev already exists
> dvb-ttpci.o: init_module: No such device
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters.
>       You may find more information in syslog or the output from dmesg
> make[1]: *** [insmod] Fehler 1
> make[1]: Verlassen des Verzeichnisses »/home/volker/DVB/driver/av7110«
> make: *** [insmod] Fehler 2
> 
> 
> Where is the mistake? I am newbie so i don't know how.
> 
> Could anybody help me?
> 
> If i whant to use the driver from Suse and  i type rcdvb start in the
> shell, i got this:
> Starting DVB/lib/modules/2.4.19-4GB/dvb/dvbdev.o: init_module:
> Input/output error
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters.
>       You may find more information in syslog or the output from dmesg
> insmod: a module named dvb_filter already exists
> Warning: loading /lib/modules/2.4.19-4GB/dvb/dmxdev.o will taint the
> kernel: no license
>   See http://www.tux.org/lkml/#export-tainted for information about
> tainted modules
> Module dmxdev loaded, with warnings
> insmod: a module named VES1893 already exists
> insmod: a module named VES1820 already exists
> insmod: a module named L64781 already exists
> insmod: a module named SP8870 already exists
> insmod: a module named tda8083 already exists
> insmod: a module named stv0299 already exists
> insmod: a module named tuner already exists
> insmod: a module named saa7146_core already exists
> insmod: a module named saa7146_v4l already exists
> Warning: loading /lib/modules/2.4.19-4GB/dvb/dvb_demux.o will taint the
> kernel: no license
>   See http://www.tux.org/lkml/#export-tainted for information about
> tainted modules
> Module dvb_demux loaded, with warnings
> Warning: loading /lib/modules/2.4.19-4GB/dvb/dvb_frontend.o will taint
> the kernel: no license
>   See http://www.tux.org/lkml/#export-tainted for information about
> tainted modules
> Module dvb_frontend loaded, with warnings
> Warning: loading /lib/modules/2.4.19-4GB/dvb/dvb_net.o will taint the
> kernel: no license
>   See http://www.tux.org/lkml/#export-tainted for information about
> tainted modules
> Module dvb_net loaded, with warnings
> /lib/modules/2.4.19-4GB/dvb/dvb.o: couldn't find the kernel version the
> module was compiled for
>                                                                                                                 failed
> ---------
> 
> I thank you for reading this to this point. If anybody can help me,
> please do it ;). I whant to use my hardware for VDR.
> 
> I have a Technotrend Card Rev. 1.6 with Hardware MPEG Decoder. 
> 
> My System:
> AMD Athlon XP 1600
> 256 MB RAM
> 120GB HDD
> GF2MX400
> TT DVB Rev. 1.6
> SB Live 5.1
> Adaptec 2904CD
> Realtek 8139C
> ITE LPT2 Card
> 
> Thanks for your Answer.
> 
> 
> Volker Grabbe
> 
> 
> 
> 
> 



--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.

References:
- [linux-dvb] DVB Driver problem, kernel Module failed to start
  - From: Volker Grabbe <volker@grabbe.com>

Prev by Date: [linux-dvb] Re: DVB Driver problem, kernel Module failed to start
Next by Date: [linux-dvb] Re: automatic AD cutting [was "Timing recording"]
Previous by thread: [linux-dvb] Re: DVB Driver problem, kernel Module failed to start
Next by thread: [linux-dvb] Nexus-s: Firmware question
Index(es):
- Date
- Thread

Home | Main Index | Thread Index