[linux-dvb] Re: Satelco DVB-S driver problem

[Klaudius.Chlebosch@t-online.de (Klaudius Chlebosch)]

Hi Holger,

it works now !!! Many thanks for youre help. But in fact.. i dont understand 
why.

I changed the CARD_INFO to ttbci and it works. In my addition the card type 
was  DVB_CARD_TT_BUDGET, in ttbci its DVB_CARD_TT_BUDGET_CI. But my card has 
no CI module ?? Anyway, ist works, so thats enough for me ...

mfg -kc-

Am Sonntag, 22. Dezember 2002 20:25 schrieben Sie:
> Hi,
>
> have you checked that DiSEqC works correctly? Please set CARD_INFO ttbci:
>
> { PHILIPS_SAA7146, 0x13c2, 0x100f, CARD_INFO ttbci },     /* LORENZEN
> DVB-S and Satelco DVB-S */
>
> please report when you get this working,
> good luck,
>
> Holger
>
> Klaudius Chlebosch wrote:
> > Hi Holger,
> >
> > thanks for pointing me to the patch. Looks somewhat better now but still
> > does not work.
> >
> > szap -n 1 gives now:
> >
> > zapping to 'Das Erste':
> > sat 0, frequency = 11837 MHz H, symbolrate 27500000, vpid = 0x0065, apid
> > = 0x0066
> > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> > status 01 | signal 8121 | snr 8ba7 | ber 0000ff00 | unc 00000000 |
> > status 01 | signal 81ec | snr 8c5b | ber 0000ffa8 | unc 00000000 |
> > status 01 | signal 81fb | snr 8e6b | ber 0000ff00 | unc 00000000 |
> > status 01 | signal 76e3 | snr 8c40 | ber 00000000 | unc 00000000 |
> > status 03 | signal 2bf2 | snr 718b | ber 00000000 | unc 00000000 |
> > status 01 | signal 80c3 | snr 8c4c | ber 0000ffa0 | unc 00000000 |
> > status 03 | signal 4105 | snr 70b6 | ber 00007b00 | unc 00000000 |
> > status 01 | signal 9ff2 | snr 8da8 | ber 00000000 | unc 00000000 |
> > status 02 | signal 40b6 | snr 7143 | ber 00000000 | unc 00000000 |
> > status 01 | signal ad1d | snr 8ff4 | ber 0000ff00 | unc 00000000 |
> > status 01 | signal 8409 | snr 8bfe | ber 0000ff00 | unc 00000000 |
> > status 01 | signal 8d3c | snr 8edd | ber 00004c00 | unc 00000000 |
> >
> > Without the patch signal and snr were always 0.
> >
> > /var/log/messages:
> > Dec 22 16:58:59 rascal kernel: Linux video capture interface: v1.00
> > Dec 22 16:59:00 rascal kernel: DVB: registering new adapter
> > (TT-Budget/WinTV-NOVA-S/KCH  PCI).
> > Dec 22 16:59:00 rascal kernel: DVB: registering frontend 0:0
> > (STV0299/TSA5059 based)...
> >
> > Is this the complete log for a proper initialized driver ?
> > /proc/interrupts states 0 interrupts for the saa7146 ????
> >
> >            CPU0
> >   0:     230309          XT-PIC  timer
> >   1:      10341          XT-PIC  keyboard
> >   2:          0          XT-PIC  cascade
> >   5:         96          XT-PIC  aic7xxx
> >   8:          2          XT-PIC  rtc
> >   9:          0          XT-PIC  saa7146(0)
> >  10:      10753          XT-PIC  HiSax
> >  11:        371          XT-PIC  eth0, usb-ohci
> >  12:      80858          XT-PIC  PS/2 Mouse
> >  14:      22753          XT-PIC  ide0
> >  15:         17          XT-PIC  ide1
> > NMI:          0
> > LOC:          0
> > ERR:          0
> > MIS:          0
> >
> > Any Idea ?
> >
> > mfg -kc-

-- 

email: Klaudius.Chlebosch@t-online.de


--
Info:
To unsubscribe send a mail to listar@linuxtv.org with "unsubscribe linux-dvb" as subject.