[linux-dvb] Re: [vdr] Re: ERROR (dvbdevice.c,533)

[Andreas Kool <akool@akool.de>]

On Sat, May 03, 2003 at 11:24:18PM +0200, Oliver Endriss wrote:
> Andreas Kool wrote:
> > On Sat, May 03, 2003 at 08:28:10PM +0200, Uwe Ortner wrote:
> > Could you please post a
> >
> >   lspci -nv | grep 0480 -A1
> >
> > here?
>
> Yesterday he posted this on the driver ml:
>
> | 00:08.0 Class 0480: 1131:7146 (rev 01)
> |         Subsystem: 110a:0000

Sorry, i missed that ...

> According to saa7146_core.c this is a full-featured
> "Siemens cable card PCI rev1.5".

Correct. I do have exactly this card, and it works fine here for month ...

> | 00:09.0 Class 0480: 1131:7146 (rev 01)
> |         Subsystem: 13c2:0002
>
> Is this a DVB-C card, too? According to saa7146_core.c this is a
> full-featured "Technotrend/Hauppauge PCI rev2.1 or 2.2".

Oops, i dont know :-(

I do have a Technotrend 1.3 card with subsystem_vendor == 0x13c2,
but with subsystem_device == 0x0000 :-(

> > 00:0f.0 Class 0480: 1131:7146 (rev 01)
> > 	Subsystem: 13c2:0000
> > -------------------^^^^
> > If you read the above, you have a Technotrend 1.3 card (like me)
>
> Ok, according to saa7146_core.c this is a full-featured
> "Siemens/Technotrend/Hauppauge PCI rev1.3".

Correct.

> > In that case, you could simply use the DVB-cvs as of april, 29. 2003
> > (but not later!) ... works fine here!
>
> You can fix later drivers by adding your card id to the 'if' statement
> at line 4965 (av7110.c). You can simply replace 0x1004, which is wrong
> anyway (IMHO).

Yes, you are right, the 0x1004 is definitely wrong.
Please remove that statement from the CVS!

> Volume control will only work for DVB-C if you have an analog module.

Shure. The MSP34xx chip is mounted on the analogue-tuner-module.
I dont know why, but ... shit happens ...

> Adding cable card ids here might break DVB-S support, if the same id is
> being used by DVB-C and DVB-S.

Oh yes, that might be a problem ...

> Is there a *reliable* id database anywhere?

I hope so - but dont know ...

> I suggest to move this discussion to the driver mailing list.

Ok, done!

> Oliver

Ciao,
Andreas
--
Andreas Kool (akool@akool.de * akool@isdn4linux.de * http://www.akool.de)
PGP: 3FBF2411 Fingerprint: B5 35 34 74 25 60 2A 7A  89 06 92 C4 08 BA A5 BD
(To get my PGP key, send me a mail with subject "send pgp key")
		X <-- Nail here for a new Monitor
Transmission of this message via the Microsoft Network is prohibited


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.