[linux-dvb] Re: [vdr] Re: ERROR (dvbdevice.c,533)

[Uwe Ortner <uwe.ortner@classic-net.de>]

Am Sam, 2003-05-03 um 23.24 schrieb Oliver Endriss:
> Andreas Kool wrote:
> > On Sat, May 03, 2003 at 08:28:10PM +0200, Uwe Ortner wrote:
> > Could you please post a
> >
> >   lspci -nv | grep 0480 -A1
> >
> > here?
> 
> Yesterday he posted this on the driver ml:
> 
> | 00:08.0 Class 0480: 1131:7146 (rev 01)
> |         Subsystem: 110a:0000
> 
> According to saa7146_core.c this is a full-featured 
> "Siemens cable card PCI rev1.5".
> 
> | 00:09.0 Class 0480: 1131:7146 (rev 01)
> |         Subsystem: 13c2:0002
> 
> Is this a DVB-C card, too? According to saa7146_core.c this is a 
> full-featured "Technotrend/Hauppauge PCI rev2.1 or 2.2".
> 
> > 00:0f.0 Class 0480: 1131:7146 (rev 01)
> > 	Subsystem: 13c2:0000
> > -------------------^^^^
> > If you read the above, you have a Technotrend 1.3 card (like me)

> Ok, according to saa7146_core.c this is a full-featured
> "Siemens/Technotrend/Hauppauge PCI rev1.3".

there are 2 cards installed, Siemens + Hauppauge DVB-C


> > In that case, you could simply use the DVB-cvs as of april, 29. 2003
> > (but not later!) ... works fine here!
> 
> You can fix later drivers by adding your card id to the 'if' statement 
> at line 4965 (av7110.c). You can simply replace 0x1004, which is wrong 
> anyway (IMHO).

I'will try this ...

> Volume control will only work for DVB-C if you have an analog module.
> 
> Adding cable card ids here might break DVB-S support, if the same id is 
> being used by DVB-C and DVB-S.
> Is there a *reliable* id database anywhere?
> 
> I suggest to move this discussion to the driver mailing list.
> 
> Oliver

I've put it on 

Regards
Uwe



-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.