[linux-dvb] How do you get a DVB-T service ID from a channel ?

[Chris Samuel <chris@csamuel.org>]

-----BEGIN PGP SIGNED MESSAGE-----

Anyone got any pointers on how to derive the Service ID of a channel that 
VDR's channel.conf file needs ?

Can't find any examples for Australia, and dvbtune -i doesn't show anything 
for the only channel being broadcast in my area (ABC).

# dvbtune -f 662500 -i
Using DVB card "Grundig 29504-401"
tuning DVB-T (Australia) to 662500000 Hz
polling....
Getting frontend event
FE_STATUS:
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC
Bit error rate: 27235
Signal strength: 13364
SNR: 48830
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC
<transponder type="T" freq="662500000">
Nothing to read from fd_pat
Nothing to read from fd_sdt
</transponder>

scan also doesn't work. My config file has:

T 662500000 7MHz 3/4 3/4 QAM64 8k 1/16 NONE

and scan says:

using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 662499840 1 3 3 3 1 1 0
>>> tune to: 
662499840:INVERSION_OFF:BANDWIDTH_7_MHZ:FEC_3_4:FEC_3_4:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (0 services)
Done.

But dvbstream works fine on that channel though..

Chris
- -- 
 Chris Samuel  :  http://csamuel.org/  :  Melbourne, VIC

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)

iQEVAwUBP22f/41yjaOTJg85AQF3TQf5Afv1k6KhTLbX0DAA1wC1g3woRhE8JUCj
ym6cWboX9EayXnJtTGyhqkYhHMnUEXXgfhkImW+A5viSIIBm8cfR2isRK2mSXmai
4wojf9b/3OV7BEq/TdmZeUng9Fro34nCMWsc3vyeby4qGTyC5ArKeOSB3GZhIOzt
nSaHtr6WFBjXP90gs7ywl/FHJQuzka6dV++5iGRB3tDaqOh31A8LW3IUz1D8fpmj
CtcAEFpBKJBU/s9/Y3OJbj5BhwPduFcTShgkujqtAlKtsmFJ8Dbk5hj20X0lNd3V
iltHyxU3+px8hAEpojnqvYAJ7+llOJaDeurPPnWW0iNQwicoYRlrTA==
=SkqR
-----END PGP SIGNATURE-----


-- 
Info:
To unsubscribe send a mail to ecartis@linuxtv.org with "unsubscribe linux-dvb" as subject.