[vdr] Re: diseqc not staying issue

[Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>]

Sameer Khosla wrote:
> 
> Hi all.
> 
> I am wondering if anyone has had this issue, and what a possible solution
> for it could be.
> 
> I am using a 4-port Diseqc 2.0 switch (yes I know the cards only support 1.2
> but no one has any only 1.2 switches anymore).
> 
> Port 1 and port 4 seem to work just fine.
> 
> If I switch to port 2 or 3, it will switch, and then after about 4-5 seconds
> it will switch back to port 1.
> 
> Any ideas?
> 
> Here is my diseqc.conf file.
> 
> S119.0W 99999 V 11250 t v W15 [E0 10 38 F0] W250 S19 v
> S119.0W 99999 H 11250 t V W15 [E0 10 38 F2] W250 S20 V
> 
> S110.0W 99999 V 11250 t v W15 [E0 10 38 F0] W250 S8 v
> S110.0W 99999 H 11250 t V W15 [E0 10 38 F2] W250 S8 V

What are these 'S19', 'S20' and 'S8'?
There is no such parameter in diseqc.conf.

Klaus

> S82.0W 99999 V 11250 t v W15 [E0 10 38 F8]
> S82.0W 99999 H 11250 t V W15 [E0 10 38 FA]
> 
> S61.5W 99999 V 11250 t v W15 [E0 10 38 FC]
> S61.5W 99999 H 11250 t V W15 [E0 10 38 FE]