Leadtek WinFast PVR2000

From LinuxTVWiki
Jump to: navigation, search

An analog PCI card from Leadtek

Overview/Features

Identification

Fedora Core 3 lspci output:

       01:01.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
       Subsystem: LeadTek Research Inc.: Unknown device 663c
       Flags: medium devsel, IRQ 9
       Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
       Capabilities: [44] Vital Product Data
       Capabilities: [4c] Power Management version 2
       01:01.2 Multimedia controller: Conexant: Unknown device 8802 (rev 05)
       Subsystem: LeadTek Research Inc.: Unknown device 663c
       Flags: bus master, medium devsel, latency 64, IRQ 9
       Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
       Capabilities: [4c] Power Management version 2

Note that the card is misidentified as a WinFast TV2000 XP.

Making it work

When you config its remote function with lirc driver you must be careful.

# modprobe cx8800
# tail /var/log/messages
       Dec 10 18:53:40 root kernel: ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 9 (level, low) -> IRQ 9
       Dec 10 18:53:40 root kernel: cx8800[0]: found at 0000:01:01.0, rev: 5, irq: 9, latency: 64, mmio: 0xfc000000
       Dec 10 18:53:40 root kernel: cx8800[0]: subsystem: 107d:663c, board: Leadtek PVR 2000 [card=9,autodetected]
       Dec 10 18:53:40 root kernel: cx8800[0]: i2c register ok
       Dec 10 18:53:40 root kernel: tuner: Ignoring new-style parameters in presence of obsolete ones
       Dec 10 18:53:40 root kernel: tuner: chip found at addr 0xc0 i2c-bus cx8800[0]
       Dec 10 18:53:40 root kernel: tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by cx8800[0]
       Dec 10 18:53:40 root kernel: cx8800[0]: i2c attach [client=Philips PAL/SECAM multi (FM1216ME MK3)]
       Dec 10 18:53:40 root kernel: cx8800[0]: registered device video0 [v4l2]
       Dec 10 18:53:40 root kernel: cx8800[0]: registered device vbi0