2.4. Video device' s internal representation¶

The actual device nodes in the /dev directory are created using the video_device struct (v4l2-dev.h). This struct can either be allocated dynamically or embedded in a larger struct.

To allocate it dynamically use video_device_alloc():

struct video_device *vdev = video_device_alloc();

if (vdev == NULL)
        return -ENOMEM;

vdev->release = video_device_release;

If you embed it in a larger struct, then you must set the release() callback to your own function:

struct video_device *vdev = &my_vdev->vdev;

vdev->release = my_vdev_release;

The release() callback must be set and it is called when the last user of the video device exits.

The default video_device_release() callback currently just calls kfree to free the allocated memory.

There is also a video_device_release_empty() function that does nothing (is empty) and should be used if the struct is embedded and there is nothing to do when it is released.

You should also set these fields of video_device:

video_device->v4l2_dev: must be set to the v4l2_device parent device.
video_device->name: set to something descriptive and unique.
video_device->vfl_dir: set this to VFL_DIR_RX for capture devices (VFL_DIR_RX has value 0, so this is normally already the default), set to VFL_DIR_TX for output devices and VFL_DIR_M2M for mem2mem (codec) devices.
video_device->fops: set to the v4l2_file_operations struct.
video_device->ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance (highly recommended to use this and it might become compulsory in the future!), then set this to your v4l2_ioctl_ops struct. The video_device->vfl_type and video_device->vfl_dir fields are used to disable ops that do not match the type/dir combination. E.g. VBI ops are disabled for non-VBI nodes, and output ops are disabled for a capture device. This makes it possible to provide just one v4l2_ioctl_ops struct for both vbi and video nodes.
video_device->lock: leave to NULL if you want to do all the locking in the driver. Otherwise you give it a pointer to a struct mutex_lock and before the video_device->unlocked_ioctl file operation is called this lock will be taken by the core and released afterwards. See the next section for more details.
video_device->queue: a pointer to the struct vb2_queue associated with this device node. If queue is not NULL, and queue->lock is not NULL, then queue->lock is used for the queuing ioctls (VIDIOC_REQBUFS, CREATE_BUFS, QBUF, DQBUF, QUERYBUF, PREPARE_BUF, STREAMON and STREAMOFF) instead of the lock above. That way the vb2 queuing framework does not have to wait for other ioctls. This queue pointer is also used by the vb2 helper functions to check for queuing ownership (i.e. is the filehandle calling it allowed to do the operation).
video_device->prio: keeps track of the priorities. Used to implement VIDIOC_G_PRIORITY and VIDIOC_S_PRIORITY. If left to NULL, then it will use the struct v4l2_prio_state in v4l2_device. If you want to have a separate priority state per (group of) device node(s), then you can point it to your own struct v4l2_prio_state.
video_device->dev_parent: you only set this if v4l2_device was registered with NULL as the parent device struct. This only happens in cases where one hardware device has multiple PCI devices that all share the same v4l2_device core.

The cx88 driver is an example of this: one core v4l2_device struct, but it is used by both a raw video PCI device (cx8800) and a MPEG PCI device (cx8802). Since the v4l2_device cannot be associated with two PCI devices at the same time it is setup without a parent device. But when the struct video_device is initialized you do know which parent PCI device to use and so you set dev_device to the correct PCI device.

If you use v4l2_ioctl_ops, then you should set video_device->unlocked_ioctl to video_ioctl2() in your v4l2_file_operations struct.

In some cases you want to tell the core that a function you had specified in your v4l2_ioctl_ops should be ignored. You can mark such ioctls by calling this function before video_register_device() is called:

v4l2_disable_ioctl (vdev, cmd).

This tends to be needed if based on external factors (e.g. which card is being used) you want to turns off certain features in v4l2_ioctl_ops without having to make a new struct.

The v4l2_file_operations struct is a subset of file_operations. The main difference is that the inode argument is omitted since it is never used.

If integration with the media framework is needed, you must initialize the media_entity struct embedded in the video_device struct (entity field) by calling media_entity_pads_init():

struct media_pad *pad = &my_vdev->pad;
int err;

err = media_entity_pads_init(&vdev->entity, 1, pad);

The pads array must have been previously initialized. There is no need to manually set the struct media_entity type and name fields.

A reference to the entity will be automatically acquired/released when the video device is opened/closed.

2.4.1. ioctls and locking¶

The V4L core provides optional locking services. The main service is the lock field in struct video_device, which is a pointer to a mutex. If you set this pointer, then that will be used by unlocked_ioctl to serialize all ioctls.

If you are using the videobuf2 framework, then there is a second lock that you can set: video_device->queue->lock. If set, then this lock will be used instead of video_device->lock to serialize all queuing ioctls (see the previous section for the full list of those ioctls).

The advantage of using a different lock for the queuing ioctls is that for some drivers (particularly USB drivers) certain commands such as setting controls can take a long time, so you want to use a separate lock for the buffer queuing ioctls. That way your VIDIOC_DQBUF doesn't stall because the driver is busy changing the e.g. exposure of the webcam.

Of course, you can always do all the locking yourself by leaving both lock pointers at NULL.

In the case of videobuf2 you will need to implement the wait_prepare() and wait_finish() callbacks to unlock/lock if applicable. If you use the queue->lock pointer, then you can use the helper functions vb2_ops_wait_prepare() and vb2_ops_wait_finish().

The implementation of a hotplug disconnect should also take the lock from video_device before calling v4l2_device_disconnect. If you are also using video_device->queue->lock, then you have to first lock video_device->queue->lock followed by video_device->lock. That way you can be sure no ioctl is running when you call v4l2_device_disconnect().

2.4.2. Video device registration¶

Next you register the video device with video_register_device(). This will create the character device for you.

err = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
if (err) {
        video_device_release(vdev); /* or kfree(my_vdev); */
        return err;
}

If the v4l2_device parent device has a not NULL mdev field, the video device entity will be automatically registered with the media device.

Which device is registered depends on the type argument. The following types exist:

`vfl_devnode_type`	Device name	Usage
`VFL_TYPE_VIDEO`	`/dev/videoX`	for video input/output devices
`VFL_TYPE_VBI`	`/dev/vbiX`	for vertical blank data (i.e. closed captions, teletext)
`VFL_TYPE_RADIO`	`/dev/radioX`	for radio tuners
`VFL_TYPE_SUBDEV`	`/dev/v4l-subdevX`	for V4L2 subdevices
`VFL_TYPE_SDR`	`/dev/swradioX`	for Software Defined Radio (SDR) tuners
`VFL_TYPE_TOUCH`	`/dev/v4l-touchX`	for touch sensors

The last argument gives you a certain amount of control over the device node number used (i.e. the X in videoX). Normally you will pass -1 to let the v4l2 framework pick the first free number. But sometimes users want to select a specific node number. It is common that drivers allow the user to select a specific device node number through a driver module option. That number is then passed to this function and video_register_device will attempt to select that device node number. If that number was already in use, then the next free device node number will be selected and it will send a warning to the kernel log.

Another use-case is if a driver creates many devices. In that case it can be useful to place different video devices in separate ranges. For example, video capture devices start at 0, video output devices start at 16. So you can use the last argument to specify a minimum device node number and the v4l2 framework will try to pick the first free number that is equal or higher to what you passed. If that fails, then it will just pick the first free number.

Since in this case you do not care about a warning about not being able to select the specified device node number, you can call the function video_register_device_no_warn() instead.

Whenever a device node is created some attributes are also created for you. If you look in /sys/class/video4linux you see the devices. Go into e.g. video0 and you will see 'name', 'dev_debug' and 'index' attributes. The 'name' attribute is the 'name' field of the video_device struct. The 'dev_debug' attribute can be used to enable core debugging. See the next section for more detailed information on this.

The 'index' attribute is the index of the device node: for each call to video_register_device() the index is just increased by 1. The first video device node you register always starts with index 0.

Users can setup udev rules that utilize the index attribute to make fancy device names (e.g. 'mpegX' for MPEG video capture device nodes).

After the device was successfully registered, then you can use these fields:

video_device->vfl_type: the device type passed to video_register_device().
video_device->minor: the assigned device minor number.
video_device->num: the device node number (i.e. the X in videoX).
video_device->index: the device index number.

If the registration failed, then you need to call video_device_release() to free the allocated video_device struct, or free your own struct if the video_device was embedded in it. The vdev->release() callback will never be called if the registration failed, nor should you ever attempt to unregister the device if the registration failed.

2.4.3. video device debugging¶

The 'dev_debug' attribute that is created for each video, vbi, radio or swradio device in /sys/class/video4linux/<devX>/ allows you to enable logging of file operations.

It is a bitmask and the following bits can be set:

Mask	Description
0x01	Log the ioctl name and error code. VIDIOC_(D)QBUF ioctls are only logged if bit 0x08 is also set.
0x02	Log the ioctl name arguments and error code. VIDIOC_(D)QBUF ioctls are only logged if bit 0x08 is also set.
0x04	Log the file operations open, release, read, write, mmap and get_unmapped_area. The read and write operations are only logged if bit 0x08 is also set.
0x08	Log the read and write file operations and the VIDIOC_QBUF and VIDIOC_DQBUF ioctls.
0x10	Log the poll file operation.
0x20	Log error and messages in the control operations.

2.4.4. Video device cleanup¶

When the video device nodes have to be removed, either during the unload of the driver or because the USB device was disconnected, then you should unregister them with:

video_unregister_device() (vdev);

This will remove the device nodes from sysfs (causing udev to remove them from /dev).

After video_unregister_device() returns no new opens can be done. However, in the case of USB devices some application might still have one of these device nodes open. So after the unregister all file operations (except release, of course) will return an error as well.

When the last user of the video device node exits, then the vdev->release() callback is called and you can do the final cleanup there.

Don't forget to cleanup the media entity associated with the video device if it has been initialized:

media_entity_cleanup (&vdev->entity);

This can be done from the release callback.

2.4.5. helper functions¶

There are a few useful helper functions:

file and video_device private data

You can set/get driver private data in the video_device struct using:

video_get_drvdata (vdev);

video_set_drvdata (vdev);

Note that you can safely call video_set_drvdata() before calling video_register_device().

And this function:

video_devdata (struct file *file);

returns the video_device belonging to the file struct.

The video_devdata() function combines video_get_drvdata() with video_devdata():

video_drvdata (struct file *file);

You can go from a video_device struct to the v4l2_device struct using:

struct v4l2_device *v4l2_dev = vdev->v4l2_dev;

Device node name

The video_device node kernel name can be retrieved using:

video_device_node_name (vdev);

The name is used as a hint by userspace tools such as udev. The function should be used where possible instead of accessing the video_device::num and video_device::minor fields.

2.4.6. video_device functions and data structures¶

enum vfl_devnode_type¶: type of V4L2 device node

Constants

VFL_TYPE_VIDEO: for video input/output devices
VFL_TYPE_VBI: for vertical blank data (i.e. closed captions, teletext)
VFL_TYPE_RADIO: for radio tuners
VFL_TYPE_SUBDEV: for V4L2 subdevices
VFL_TYPE_SDR: for Software Defined Radio tuners
VFL_TYPE_TOUCH: for touch sensors
VFL_TYPE_MAX: number of VFL types, must always be last in the enum

enum vfl_devnode_direction¶: Identifies if a struct video_device corresponds to a receiver, a transmitter or a mem-to-mem device.

Constants

VFL_DIR_RX: device is a receiver.
VFL_DIR_TX: device is a transmitter.
VFL_DIR_M2M: device is a memory to memory device.

Note

Ignored if enum vfl_devnode_type is VFL_TYPE_SUBDEV.

enum v4l2_video_device_flags¶: Flags used by struct video_device

Constants

V4L2_FL_REGISTERED

indicates that a struct video_device is registered. Drivers can clear this flag if they want to block all future device access. It is cleared by video_unregister_device.

V4L2_FL_USES_V4L2_FH

indicates that file->private_data points to struct v4l2_fh. This flag is set by the core when v4l2_fh_init() is called. All new drivers should use it.

V4L2_FL_QUIRK_INVERTED_CROP

some old M2M drivers use g/s_crop/cropcap incorrectly: crop and compose are swapped. If this flag is set, then the selection targets are swapped in the g/s_crop/cropcap functions in v4l2-ioctl.c. This allows those drivers to correctly implement the selection API, but the old crop API will still work as expected in order to preserve backwards compatibility. Never set this flag for new drivers.

V4L2_FL_SUBDEV_RO_DEVNODE

indicates that the video device node is registered in read-only mode. The flag only applies to device nodes registered for sub-devices, it is set by the core when the sub-devices device nodes are registered with v4l2_device_register_ro_subdev_nodes() and used by the sub-device ioctl handler to restrict access to some ioctl calls.

struct v4l2_prio_state¶: stores the priority states

Definition:

struct v4l2_prio_state {
    atomic_t prios[4];
};

Members

prios: array with elements to store the array priorities

Description

Note

The size of prios array matches the number of priority types defined by enum v4l2_priority.

void v4l2_prio_init(struct v4l2_prio_state *global)¶: initializes a struct v4l2_prio_state

Parameters

struct v4l2_prio_state *global: pointer to struct v4l2_prio_state

int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local, enum v4l2_priority new)¶: changes the v4l2 file handler priority

Parameters

struct v4l2_prio_state *global: pointer to the struct v4l2_prio_state of the device node.
enum v4l2_priority *local: pointer to the desired priority, as defined by enum v4l2_priority
enum v4l2_priority new: Priority type requested, as defined by enum v4l2_priority.

Description

Note